POSIFLEX Jiva TP-8000 User's Manual

Jiva TP

/LT

5815 Pro /

5915 Pro

/ - 8000 / - 8200 Touch Terminal

w/ Slim or Universal Base

FCC Notes:

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized technicians opens the machine. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex will assume no liability for any technical inaccuracies or editorial or other errors or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including without limitation loss of data or profits, resulting from the furnishing, performance, or use of this material. This information is provided “as is” and Posiflex Inc. expressly disclaims any warranties, expressed, implied or statutory, including without limitation implied warranties of merchantability or fitness for particular purpose, good title and against infringement. The information in this manual contains only essential hardware concerns for general user and is subject to change without notice. Posiflex reserves the right to alter product designs, layouts or drivers without notification. The system integrator shall provide applicative notices and arrangement for special options utilizing this product. The user may find the most up to date information of the hardware from web sites: http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com All data should be backed-up prior to the installation of any drive unit or storage peripheral. Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this or any other Posiflex product. All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without prior express written consent from Posiflex Inc. the publisher of this documentation.

P/N: 16320900010

User’s Manual

Rev.: Original

Part 1

CAUTION

ALERT TO OUR HONORABLE CUSTOMERS:

l Please always read thoroughly all the instructions and documents

delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences.

l This product contains inside a Lithium battery and maybe also a

sealed type Lead acid battery if the UPS battery option is ordered. Please always follow local environmental protection laws / regulations for disposal of used batteries and always replace only with battery of same type.

l If you have an UPS battery installed in the product:

² Temperature above 40°C must be strictly avoided as it

could cause termination of battery life and unexpected result even if the battery is not in work.

² Do not power off the system just by shutting off the AC

power leaving the battery supporting the whole system till completely exhausted. Repeatedly using it up or improper maintenance reduces the battery life dramatically.

² Always fully recharge the battery at least once every 3

months if the battery is not connected.

² Always disconnect the UPS battery from the system if the

system is to be left OFF for more than 72 hours to prevent possible damage. Only connect the UPS battery back right before you are going to re-power on the system.

² Replace the battery as soon as the monitoring software

indicates the battery is out of service. Attempt to recharge a dead battery is dangerous!

² A separate battery monitor is not required for this series.

DAILY MAINTENANCE GUIDE

For regular cleaning of the Jiva systems, please use only soft haired brush or dry soft cloth. You may use moist soft cloth to remove stains when necessary. Apply only proper amount of mild neutral detergent for obstinate stains. Please note that never use Acryl dissolving solvent or Polycarbonate dissolving solvent. You may apply ammonia-based glass cleaner only on the screen surface.

Risk Of Explosion If Battery Is Replaced By An Incorrect Type

Dispose Of Used Batteries According To Local Regulations

Part 2

11 11 12 1 12 12 10 10 7 5 13 13 5 7 1

7 3 4 1 1

4 5 6 9 8 8 9 10 10 7 5 2 2

INTRODUCTION

PRODUCT PICTURES

Front Views

TP-5815 Pro / TP-8000

Side Views

TP-5815 Pro / TP-8000

TP-5915 Pro / TP-8200

Part 3

1 1 7 12 5 16

10 8 12

Rear Views

14 15

TP-5815 Pro / TP-8000

Bottom Views

TP-5915 Pro / TP-8200

16 16

TP-5815 Pro / TP-8000

TP-5915 Pro / TP-8200

PARTS IDENTIFICATION

1. Main unit

2. Touch panel / LCD panel

3. Optional side mount kit

4. Power status indicator

5. Universal base stand

6. Optional CDROM drive

7. Slim base stand

8. Cable cover

9. Removal hollow in cable cover

10. Lock / release lever for tilt angle adjust

11. Optional rear top mount kit PD-302

12. Lock / release button for main unit detach

13. Power switch

14. Rear connect cover

15. Power connector hole

16. Cable exit

17. 15” 2nd LCD bracket screw holes

18. Auxiliary cable exit

19. Rubber feet

Part 4

PRODUCT FEATURES

Standard Features:

a) CPU: C7 - 1.0 GHz for TP/LT-5815 Pro / -5915 Pro.

Celeron 2.0 GHz for TP/LT-8000 / -8200

b) An advanced slim or universal base design. The slim base (TP/LT-5815

Pro / -8000) supports 2nd LCD display or pole mount customer display in desktop mount application and easy wall mount conversion, storage room for HDD and optional UPS battery for both desktop and wall mount applications. The universal base (TP/LT-5915 Pro / -8200) supports extensive features as 2nd LCD display or pole mount customer display in desktop mount application and easy wall mount conversion, storage room for power adaptor, HDD, optional internal CD ROM drive and optional UPS battery for both desktop and wall mount applications.

c) Support Win 2000, Win XP Pro, WEPOS and Linux environment d) High quality 15” TFT active matrix LCD panel e) Vertical type LCD panel with easy tilt angle adjustment from 17.5° to

76.5°

f) Durable resistive type (leading edge Infra Red type optional) touch

panel that endures 35 million touches min. at same spot

g) Spill proof water resistant structure allowing easy cleaning h) Easy maintenance construction i) Various I/O ports supported, including:

1. one PS/2 KB port

2. one PS/2 mouse port

3. 4 serial ports. All with capability for +5V DC support

4. one parallel port

5. 5 USB ports for TP/LT-5815 Pro / -5915 Pro and 6 USB ports for TP/LT-8000 / -8200

6. one LAN port 10/100 base T Ethernet upgradeable to 1 Gbps

7. one external VGA monitor port

8. one IDE connector and HDD power connector for HDD in base

9. one 4 pin lock type DC 12 V power input connector

10. one UPS battery connector

11. one CR port for control over 2 cash drawers max.

12. audio ports (1 Microphone input and 2 optional slim type speakers)

j) Touch control functions: left/right button, double click, drag & draw k) Dual display support (per OS capability) l) VGA memory size shared from system memory (16 ~ 64 MB for

TP/LT-5815 Pro / -5915 Pro, 16 ~ 128 MB for TP/LT-8000 /-8200)

m) Support high performance DDR2 DRAM in two modules with

maximum memory size 1GB for TP/LT-5815 Pro / -5915 Pro, 2GB

Part 5

DDR DRAM in two modules for TP/LT-8000 / -8200

n) Integrated structure for side mount upgrade kits (KP-100, SD-100, SD-

200 or BC-100U) and optional top mount customer display PD-302

o) The MSR in side mount kit is with software programmable parameters

for Win 2000 or Win XP pro

p) Built-in UPS function to support the system from intermittent power

failure (battery itself is an option)

q) Accidental power off protection – The power switch is safely located

inside a push-open cover, and it can be defined as a “ON” switch only through software command

r) Preconditioned power up function – by alarm clock or COM port

MODEM ring or LAN

Optional Items:

Note: The underlined items in the following list means that option must be

set prior to shipment from the factory. The rest items can be set by the dealers.

a) DDR2 SDRAM memory expansion up to 1GB (for TP/LT-5815 Pro / -

5915 Pro) or DDR SDRAM up to 2GB (for TP/LT8000 / -8200)

b) RS232 interface Infra-Red type touch panel durable for 50 million

touches min. at same spot

c) Integrated side mount upgrade kit among KP100, SD100, SD200, BC-

100U d) Integrated rear top mount 2 by 20 LCD customer display PD-302 e) Integrated base mount device choice among: PD2501 or PD2602 VFD

pole display or LM-6201 12.1” or 15” 2nd LCD panel monitor f) USB interface external slim type CD ROM drive or COMBO drive g) Internal slim type CD ROM or COMBO drive in universal base models h) UPS battery in base i) Preload OS j) 2 in 1 cash drawer control cable (CCBLA-238) k) Interface select for resistive touch panel among PS2 (for TP -8000 /

8200 only), RS232 and USB

Major Model Numbers:

TP-5815 Pro: C7 1 G CPU, slim base TP-5915 Pro: C7 1 G CPU, universal base TP-8000: Celeron 2.0 G CPU, slim base TP-8200: Celeron 2.0 G CPU, universal base

※LT-5815 Pro, LT-5915 Pro, LT-8000, LT-8200: same as above TP models but without touch screen

Part 6

+ 14 hidden pages

POSIFLEX Jiva TP-8000 User's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual