Posiflex JIVA KS-7212X User Manual

P/N:

164909000

20

Fan Free Touch Terminal

FCC Notes:

This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex Technology, Inc. will assume no liability for any technical inaccuracies or
editorial or other errors or omissions contained herein, nor for direct, indirect,
incidental, consequential or otherwise damages, including without limitation loss of
data or profits, resulting from the furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims
any warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex Technology, Inc. reserves the
right to alter product designs, layouts or drivers without notification. The system
integrator shall provide applicative notices and arrangement for special options utilizing
this product. The user may find the most up to date information of the hardware from:
http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Technology, Inc. the publisher of this documentation.
© Copyright Posiflex Technology, Inc. 2013
All brand and product names and trademarks are the property of their respective holders.

KS – 7212/X

User’s Manual

Rev.: A0

Part 1

ALERT TO OUR HONORABLE CUSTOMERS:

 Please always read thoroughly all the instructions and documents

delivered with the product before you do anything about it. Don’t
take any premature action before you have a full understanding of
the consequences.

 This product contains inside a Lithium battery. Please always

follow local environmental protection laws / regulations for disposal
of used batteries and always replace only with battery of same type.

DAILY MAINTENANCE GUIDE

For regular cleaning of the KS systems, please use only soft haired brush or
dry soft cloth. You may use moist soft cloth to remove stains when necessary.
Apply only proper amount of mild neutral detergent for obstinate stains. Please
note that never use Acryl dissolving solvent or Polycarbonate dissolving
solvent. You may apply ammonia-based glass cleaner only on the screen
surface.

CAUTION

Risk Of Explosion If Battery Is Replaced By An Incorrect Type

Dispose Of Used Batteries According To Local Regulations

Part 2

7

INTRODUCTION

PRODUCT PICTURES

Front View Rear View

1

2

3

4

5

Side Views

10

11

12

13

14

18

19

15

1

6

7

8

9

5

7

13

Bottom View Inside Base

16

17

18

20
21

22

Part 3

G

PARTS IDENTIFICATION

1. Main unit

2. Touch panel / LCD panel

3. Power indicator

4. Base stand

5. Optional side mount kit

6. HDD cover CF memory card reader

7. Hinge cover

8. Base back cover

9. Cable exit

10. Power switch

11. LCD brightness up button

12. LCD brightness down button

13. Base back cover hook

14. USB ports on left side

15. Sundries trough for pencils, paper clips etc.

16. Rubber feet with fixing screws

17. Screw holes for base mount pole display kit

18. Cable tie (in the terminal’s back cover for desktop use only)

19. Cable tie (in the I/O plate for wall mount use only)

20. Oval cable passage on cast base trunk

21. Cable tie for all cables

22. Screw posts for optional HDD in base

I/O Panel

A C

Call out Label Description

A CR Controlling up to 2 cash drawers
B LINE OUT Audio Output
C LAN2 LAN port, connecting to Ethernet
D USB0-3 4 USB ports, connecting to USB devices
E LAN1 LAN port, connecting to Ethernet

F COM4 RJ45 Com port, connecting to peripherals
G COM3 RJ45 Com port, connecting to peripherals
H COM2 DB9 Com port, connecting to peripherals

E F H

I K B

J D

Part 4

I COM1 DB9 Com port, connecting to peripherals
J VGA Connecting to secondary display

K DC IN Connecting to 12V/50W power supply

PRODUCT FEATURES

Standard Features:

a)

a)

CPU: Intel

a)a)
b)

b)

Chipset: ICH8M

b)b)
c)

c)

Fan free structure for harsh environment

c)c)
d)

d)

Data storage device: SATA HDD 2.5” 320 GB or SSD HDD.

d)d)
e)

e)

Mini slim base featuring a storage room for optional 2.5” SATA HDD.

e)e)
f)

f)

Supports Win XP Pro, POSReady 2009/7, Win 7, and Linux

f)f)
g)

g)

12” TFT LCD, 1024 x 768 XGA

g)g)
h)

h)

Monitor tilt adjustment angle from 20° to 90°

h)h)
i)

i)

LCD brightness adjust buttons at side of main unit

i)i)
j)

j)

Touchscreen: 5-wire resistive with USB interface

j)j)
k)

k)

Durable resistive type touch panel that endures 35 million touches min.

k)k)

at same spot

l)

l)

Supports various I/O ports:

l)l)

1. 4 x COM ports (DB9 x 2, RJ45 x 2), supporting +5V DC output.

2. 6 x USB ports (4 on rear panel, 2 on left side)

3. 2 x Ethernet LAN port supporting 10/100/1000 Base T

4. 1 x CR port controlling up to two cash drawers.

5. 1 x lineout for audio output.

6. Reserved one LPT interface through use of optional special cable in

m)

m)

One built-in internal 2W speaker

m)m)
n)

n)

Power Supply: 50W, 12V DC

n)n)
o)

o)

Power On Wake UP: Alarm/LAN

o)o)

®

Pineview processor D525 (1M Cache, 1.80 GHz)

service window

Option Items:

Note: The underlined items in the following list means that option must

be set prior to shipment from the factory. The rest items can be set
by the dealers.

a) DDR3 1066MHz memory expansion up to 4GB max.
b) SSD of at least 8GB.
c) Base installation kit for HDD.

Part 5