Posiflex JIVA HS-2310 User Manual
P/N:
15530900010
FCC Notes:
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions
manual, may cause interference to radio communications. It has been tested and found
to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of
FCC Rules, which are designed to provide reasonable protection against interference
when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own expense
will be required to take whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex Technology, Inc. will assume no liability for any technical inaccuracies or
editorial or other errors or omissions contained herein, nor for direct, indirect,
incidental, consequential or otherwise damages, including without limitation loss of
data or profits, resulting from the furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims
any warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex Technology, Inc. reserves the
right to alter product designs, layouts or drivers without notification. The system
integrator shall provide applicative notices and arrangement for special options utilizing
this product. The user may find the most up to date information of the hardware from:
http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Technology, Inc. the publisher of this documentation.
© Copyright Posiflex Technology, Inc. 2013
All brand and product names and trademarks are the property of their respective holders.
HS- 2308/2310/2312
Hybrid Desktop POS
User’s Manual
Rev.: Original
Part 1
ALERT TO OUR HONORABLE CUSTOMERS:
Please always read thoroughly all the instructions and documents
delivered with the product before you do anything about it. Don’t
take any premature action before you have a full understanding of
the consequences.
This product contains inside a Lithium battery. Please always
follow local environmental protection laws / regulations for
disposal of used batteries and always replace only with battery of
same type.
DAILY MAINTENANCE GUIDE
For regular cleaning of the HS systems, please use only soft haired brush or
dry soft cloth. You may use moist soft cloth to remove stains when necessary.
Apply only proper amount of mild neutral detergent for obstinate stains. Please
note that never use Acryl dissolving solvent or Polycarbonate dissolving
solvent. You may apply ammonia-based glass cleaner only on the screen
surface.
CAUTION
Risk Of Explosion If Battery Is Replaced By An Incorrect Type
Dispose Of Used Batteries According To Local Regulations
Part 2
7
INTRODUCTION
PRODUCT PICTURES
Front View Rear View
1
2
3
4
5
6
7
Side Views
8
9
12
13
Bottom View
14
16
17
10
11
15
Part 3
C
PARTS IDENTIFICATION
1. Main unit
2. Touch panel / LCD panel
3. Smart card slot
4. Power LED
5. Error LED
6. Paper out LEDF memory card reader
7. Feed switch
8. MSR slot
9. Paper exit
10. Top I/O plate
11. Base stand
12. USB port
13. Power switch
14. Finger print sensor
15. Hood release button
16. Bottom I/O plate
17. Rubber foot
Top I/O Panel
A
B
D
Call out Label Description
A COM3 RJ45 Com port, connecting to peripherals
B LPT DB25 parallel port, connecting to peripherals
C USB3 USB port, connecting to USB devices
D VGA Connecting to secondary display
Part 4
H
Bottom I/O Panel
E
F
G
I
J
E DC IN Connecting to power supply
F CR Controlling up to 2 cash drawers
G USB1~3 USB port, connecting to USB devices
H LAN LAN port, connecting to Ethernet
I COM1~2 DB9 Com port, connecting to peripherals
J KB PS/2 keyboard port, connecting to peripherals
K LINE OUT Analog signal port, connecting to audio
devices
PRODUCT FEATURES
Standard Features:
a)
a)
HS-2308: 8” touch terminal; HS-2310: 10” bezeless touch terminal;
a)a)
HS-2312: 12” bezeless touch terminal.
b)
b)
CPU: Intel
b)b)
c)
c)
Chipset: ICH8M.
c)c)
d)
d)
Fan free structure for harsh environment.
d)d)
Data storage device: SATA HDD 2.5” 320 GB or SSD HDD.
e)
e)
Supports Win XP Pro, POS Ready2009, POSReady 7, Linux, Win7,
e)e)
WinCE.
f)
f)
8” TFT LCD, 800 x 600; 10”&12” TFT LCD, 1024 x 768.XGA
f)f)
g)
g)
Monitor tilt adjustment angle from 17° to 45 °.
g)g)
h)
h)
Touchscreen: 5-wire resistance bezeless touch panel.
h)h)
i)
i)
Durable resistive type touch panel that endures million touches min. at
i)i)
same spot.
j)
j)
Supports various I/O ports:
j)j)
®
Pineview processor D525 Dual Core (1M Cache, 1.80 GHz)
K
Part 5
1. 3 x COM ports (DB9 x 2, RJ45 x 1), supporting +5V DC output by
BIOS/+12V DC output by jumper setting.
2. 5 x USB ports (3 on bottom I/O panel, 1 on left side, 1 on top I/O
panel).
3. 1 x Ethernet LAN port supporting 10/100/1000 Base T.
4. 1 x CR port controlling up to two cash drawers.
5. 1 x lineout for audio output.
6. 1 x LPT port for parallel device connection.
k)
k)
One mini PCI-E extension slot in side of system.
k)k)
l)
l)
Power on wakeup through alarm/LAN.
l)l)
m)
m)
Power Supply: 120W, 12V DC.
m)m)
n)
n)
3” Thermal printer with auto cutter build-in.
n)n)
o)
o)
Smart card reader thru USB interface supported.
o)o)
p)
p)
Finger print recognition supported.
p)p)
q)
q)
3 tracks ISO or JIS-II MSR.
q)q)
Option Items:
Note: The underlined items in the following list means that option must
be set prior to shipment from the factory. The rest items can be set
by the dealers.
a) DDR3 800FSB, memory expansion up to 4GB max.
b) SSD of at least 16GB.
c) Secondary customer Display: 7” PD-6507, PD-340UE, PD-2607UE.
d) WiFi modular with antenna.
e) Preload OS Win XP Pro, POSReady 7/2009, Win 7, or Linux.
f) RJ45 to DB9 serial port conversion cable (for COM3 port).
g) Split cable for 2 cash drawer control.
h) MSR.
i) Finger print sensor.
j) Smart card device.
INSTALLATION GUIDES
CAUTION: Before any installation or cable connection to the set, please
always make certain that the system is turned off and the
external power source to the set is removed to prevent
electric hazard! Never touch any metal pin in the
connectors or circuits to avoid high voltage hazard or
electrostatic discharge damage unless the operator is well
grounded. Failure to do the above will void the product
warranty!
Part 6
Loading...