Posey Drainage Bag Straps User Manual



SPECIALTY PRODUCTS - INCONTINENCE CARE

SLOTS

END HOOK

HOOK

URINARY CATHETER or DRAINAGE TUBE

POSEY HOOK

POSEY HOOK

FOAM BAND

METAL RING

Posey

®

Urinary Care Products

Drainage Bag Straps

8142

Posey Drainage Bag Straps securely and comfortably hold any
urinary drainage bag to the leg. Made of soft, nonslip,
polyurethane foam with a nylon backing for additional
strength. Washable. One pair per package.

Application Instructions:

1. Slip the two white center hooks through the slots on the top edge of the plastic
drainage bag.

2. Fold the hook so the closure adheres to the white nylon backing. The blue foam will
be against the leg.

3. Use the end hook to secure the strap around the leg. Trim excess foam to fit.

4. Repeat the process with bottom strap.

NOTE: Be careful not to wrap the strap too tightly. Check frequently for circulatory

impairment.

REF

8142

Drainage Bag Straps

Disposal

product per facility’s policy for
BIOHAZARDOUS materials.

© 2012 Posey Company. All rights reserved.

Properly dispose of the

Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: [phone] or 1.626.443.3143 • Fax: [phone] or 1.626.443.5014

Washing Instructions:

Catheter Tube Holder Straps

8143

This soft foam band wraps around the leg to hold the
catheter or drainage tube in place without skin­irritating tape. Washable. One dozen per package.

Application Instructions:

1. Attach the foam band around the patient's leg, using the Posey Hook. Trim excess
(over 4").

2. Center the catheter tube over the Posey Hook, between the metal ring and the
Posey Hook.

3. Thread the Posey Hook through the metal ring and secure to foam band with the
Posey Hook.

NOTE: Be careful not to wrap the strap too tightly. Check frequently for circulatory
impairment.

REF

8143 Foam Catheter Tube Holder Straps

Storage and Handling

This device is designed for use in normal indoor environments. This device may be
stored in ambient warehouse temperatures at normal humidity levels. Avoid excess
moisture or high humidity that may damage product materials.

M1385 REV B 112912