Porter & Charles CC30S, CC60-2, CC76-2, CC90-2 Operation Manual

Porter & Charles
OPERATION MANUAL
Ceramic Hob
Congratulations on the purchase of your Porter&Charles appliance. We are sure it will provide many years of great cooking experience. You may find that it has different features and characteristics to your last appliance. It is essential you read this operation manual thoroughly to fully understand all of the
various functions and operations. Experiment with your cooking and take advantage of the features your new appliance offers.
This manual should be retained for future reference. Should ownership of the appliance be transferred, please ensure that the manual is also passed onto the new owner.
Contents
Product Description ……………………………….....Page 3 - 4
Using the appliance ………………….………………….Page 5 - 9 Cleaning & Maintenance……… ………………………..Page 10
Installation Instructions …………………………………Page 11
Dimensions and Cut-outs………………………………..Page 12 Warranty…………………………………………………….Page13
2
DESCRIPTION
HOT PLATES
1
23
1
3
2
1
4
1
1
4
1
Touch Control
1. Hi-lite heating element 145mm. 1200Watt
2. Hi-lite heating element 180mm. 1800Watt
3. Double circuit Hi-lite heating element 120/210mm. 750/2200Watt
4. Double circuit oval Hi-lite heating element 180/260mm. 750/2200Watt
3
Knob Control
1. Radiant heating element 145mm. 1200Watt
2. Radiant heating element 180mm. 1700Watt
3. Hi-lite heating element 145mm. 1200Watt
4. Hi-lite heating element 180mm. 1800Watt
5. Double circuit Hi-lite heating element 120/210mm 750/2200Watt
6. Double circuit oval Hi-lite heating element 180/260mm 750/2200Watt 7 Hi-lite heating 210mm 2200Watt
TOUCH CONTROL
1- Selection of cooking setting 8- Selection of timer setting 2- Cooking setting position 9- Timer position 3- Connection key front left 10- Locking of the cooking surface connection and selection 4- Connection display front left 11- Locking display 5- Display of cooking setting 12- Connection key rear right 6- On/Off switch, emergency off switch 13- Connection display rear right 7- Display timer
4
Using the Appliance
WARNING
All operations relative to installation and electric connection should be carried out by qualified personnel in conformity with the regulations in force in your country.
The specific instructions are described in the booklet section for the installer
NOTICE
Use only flat pans with a sufficiently thick base, equal to or not much larger than the hot plate selected (fig.1)
The containers should not have rough bottoms in order to avoid scratching the heat surface of the top.
Do not switch the electric plate on without the pan over the plate.
Do not cook any food directly on the hot area. Avoid overflows of liquid and should they occur clean away
promptly.
Turn off the plate few minutes before the cooking end.
USE
Model with knob control switches
Switching on Set the power by rotating the knob, taking into consideration that the highest number corresponds with the maximum power. If the hob is fitted with extended zones, the outer heating element can be switched on turning the knob up to the end of rotation.
The pilot light is switched ON when at least one element is on. The pilot light is switched ON when the top temperature at indicated spot is higher than 50
Model with touch control switches
Switching on
O
C.
5
Loading...
+ 11 hidden pages