Porter-Cable DA250B User Manual
Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
Part No. 903898 - 04-01-04
ESPAÑOL: PÁGINA 13
FRANÇAISE : PAGE 25
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2004 Porter-Cable Corporation
FINISH NAILER
MODEL DA250B
2
PORTER✦✦CABLE
Porter-Cable Corporation
4825 Highway 45 North
Jackson, TN 38305
Date of Manufacture:___________________________
Fecha de fabricación:, Date de fabrication:
Serial No:______________________________________
Número de serie:, Nombre d'ordre
GB ENGLISH
EC-DECLARATION OF
CONFORMITY
We declare under our sole responsibility that
this product is in conformity with the
regulations EN292-2: section 3 of 1992
EN292-1: section 5 of 1992
EN1050: 1993
EN792 13: 2000
E ESPANOL
DECLARACION DE
CONFORMIDAD ”CE”
Declaramos bajo nuestra sola responsabilidad que est e
producto está en conformidad con las regulaciones
EN292-2: section 3 of 1992
EN292-1: section 5 of 1992
EN1050: 1993
EN792 13: 2000
F FRANÇAISE
DÉCLARATION DE CONFORMITÉ CE
Nous declarons sous notre propre responsabilite que
ce produit est conforme aux reglementations
EN292-2: section 3 of 1992
EN292-1: section 5 of 1992
EN1050: 1993
EN792 13: 2000
3
indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
used without the safety alert symbol indicates potentially
hazardous situation which, if not avoided, may result in property
damage.
This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING
EQUIPMENT PROBLEMS. To help you recognize this information, we use the
symbols below. Please read the manual and pay attention to these sections.
SAFETY GUIDELINES / DEFINITIONS
SAVE THESE INSTRUCTIONS!
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS.
There are certain applications for which this tool was
designed. Porter-Cable strongly recommends that this tool NOT be modified
and/or used for any application other than for which it was designed. If you
have any questions relative to its application DO NOT use the tool until you
have written Porter-Cable and we have advised you.
Technical Service Manager
Porter-Cable Corporation
4825 Highway 45 North
Jackson, TN 38305
Improper operation or maintenance of this product could
result in serious injury and property damage. Read and understand all
warnings and operating instructions before using this tool. When using
pneumatic tools, basic safety precautions should always be followed to
reduce the risk of personal injury. For additional information visit our
website www.porter-cable.com.
Additional Information regarding the safe and proper operation of air
nailer and fastener tools (i.e. a safety video) is available from the
International Staple, Nail and Tool Association (ISANTA)
(www.isanta.org). Additional Information regarding the safe and proper
operation of power tools (i.e. a safety video) is available from the Power
Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851
(www.powertoolinstitute.com). Additional Information is also available
from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL
60143-3201, the American National Standards Institute ANSI 01.1Safety
Requirements for Woodworking Machines, and the U.S. Department of
Labor regulations.
4
Fig. 6
Fig. 5
Fig. 2
Fig. 3
Fig. 4
1. Read and understand tool labels and
manual. Failure to follow warnings could
result in DEATH or SERIOUS INJURY. Fig. 1.
2. Operator and others in work area MUST
wear safety glasses with side shields.
These safety glasses must conform to ANSI
Z87.1 requirements (approved glasses have
“Z87” printed or stamped on them). Fig. 2.
3. Keep fingers AWAY from trigger when
not driving fasteners to avoid accidental
firing. Never carry tool with finger on
trigger. In "contact actuation mode", tool
will fire a fastener if tool is bumped.
4. Choice of triggering method is
important. Check manual for triggering
options. See “Using the Tool with Different
Triggering Options” section of this manual.
5. Never point tool at yourself or others
in work area. Serious injury or death may
occur if the tool is activated. Fig. 3
6. Never use oxygen or other bottled
gasses. Explosion will occur. Never use
combustible gases or any other reactive
gas as a power source for this tool:
explosion and serious personal injury will
result. Fig. 4.
7. Wear ear protection to safe-guard
against possible hearing loss. Ear
protection equipment must conform to ANSI
S3.19 requirements. Fig. 5.
8. Use clean, dry, regulated, compressed air at 70 to 120 PSI, (4.8 to 8.3
BAR). Fig. 6.
Fig. 1
GENERAL SAFETY RULES
Loading...