Porter-Cable PCH2401, D25803-025-1 User Manual

Instruction
manual
IMPORTANT
Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations.
ESPAÑOL: PÁGINA 21 FRANÇAIS: PAGE 41
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
PCH2401
Copyright © 2002 Porter-Cable Corporation
The Model and Serial No. plate is located on the frame. Record these numbers in the spaces below and retain for future reference.
Model No.
Type
Serial No.
5 Horsepower 2400PSI
2.5 GPM Pressure Washer
2- ENG
D25803
This product may not be equipped with a spark arresting
muffler. If the product is not equipped and will be used around flammable materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or other similar items, then an approved spark arrester must be installed and is legally required in the state of California. It is a violation of California statutes section 130050 and/or sections 4442 and 4443 of the California Public Resources Code, unless the engine is equipped with a spark arrester, as defined in section 4442, and maintained in effective working order. Spark arrester are also required on some U.S. Forest Service land and may also be legally required under other statutes and ordinances.
Engine exhaust contains chemicals known, in certain
quantities, to cause cancer, birth defects or other reproductive harm.
Read Operator’s Manual. Do not operate equipment until you have read Operator’s Manual for Safety
, Assembly, Operation,
and Maintenance Instructions
.
GENERAL INFORMATION
Congratulations! You have purchased a high quality product from America’s leading manufacturer of pressure washers. This pressure washer, when properly used and maintained, will provide trouble free service. Please read and follow these instructions for proper use and maintenance.
All sales of pressure washers are final. Do not return this product to the retailer. Call 1-888-559-8550.
If you experience any problems and need assistance, please call us at our toll free number 1-888-559-8550, Monday through Saturday, 8:00 a.m. To
6:00 p.m. C.S.T.
If repair or service part purchase is required, our many Authorized Warranty Service Centers are conveniently located and equipped to handle all in­warranty and out-of-warranty service.
For the location of the nearest Authorized Warranty Service Center call 1-888-559-8550, Ext. 2, 24 hours a day, 7 days a week.
All pressure washers carry a manufacturer's one year warranty from date of purchase for consumer use and a 90 day warranty for commercial use.
Retain sales receipt as proof of purchase for warranty service.
Do not operate this unit until you have read and understood this Owners
Manual for Safety, Operation, and Maintenance Instructions.
Do not operate this unit until you have read and understood the Engine Owners Manual for Safety, Operation, and Maintenance Instructions.
3- ENG
D25803
indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
indicates a potentially hazardous situation which, if not avoided,may result in minor or moderate injury
used without the safety alert symbol indicates potentially hazardous situation which, if not avoided,
may result in property damage.
This manual contains information that is im­portant for you to know and understand. This information re­lates to protecting YOUR SAFETY and PREVENTING EQUIP­MENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay atten­tion to these sections.
SAFETY GUIDELINES / DEFINITIONS
IMPORTANT SAFETY INSTRUCTIONS
Improper operation or maintenance of this product could result in serious injury and property damage. Read and understand all warnings and
operating instructions before using.
RISK OF
EXPLOSION
OR FIRE
HAZARD
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Spilled gasoline and it’s vapors can become ignited from cigarette sparks, electrical arcing, exhaust gases, and hot engine components such as the muffler.
• Shut off engine and allow it to cool before adding fuel to the tank.
• Use care in filling tank to avoid spilling fuel. Move pressure washer away from fueling area before starting engine.
• Heat will expand fuel in the tank which could result in spillage and possible fire explosion.
• Keep maximum fuel level ½” below top of tank to allow for expansion.
• Operating the pressure washer in an explosive environment could result in a fire.
• Operate and fuel equipment in well ventilated areas free from obstructions. Equip areas with fire extinguisher suit­able for gasoline fires.
• Materials placed against or near the pressure washer can interfere with its proper ventilation features causing overheating and possible ignition of the materials .
• Never operate pressure washer in an area containing dry brush or weeds.
• Muffler exhaust heat can damage painted surfaces, melt any material sensitive to heat (such as siding, plastic, rubber, or vinyl), and damage live plants.
• Always keep pressure washer a mini­mum of four feet away from surfaces (such as houses, automobiles, or live plants) that could be damaged from muffler exhaust heat
• Improperly stored fuel could lead to accidental ignition. Fuel im­properly secured could get into the hands of children or other un­qualified persons.
• Store fuel in an OSHA approved container, in a secure location away from work area.
• Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.
• Do not spray flammable liquids.
4- ENG
D25803
RISK TO FLUID
INJECTION
RISK OF INJURY
OR PROPERTY DAMAGE WHEN TRANSPORTING
OR STORING
RISK TO
BREATHING
HAZARD
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Breathing exhaust fumes will cause serious injury or death!
• Operate pressure washer in a well ventilated area. Avoid enclosed areas such as garages, basements, etc.
• Never operate unit in a location occupied by humans or animals.
• Some cleaning fluids contain sub­stances which could cause injury to skin, eyes, or lungs.
• Use only cleaning fluids specifically recommended for high pressure washers. Follow manufacturers recommendations. Do not use chlorine bleach or any other corrosive compound.
• Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will dam­age carpet, paint or other surfaces in vehicles or trailers.
• If pressure washer is equipped with a fuel shut-off valve, turn the valve to the off position before transporting to avoid fuel leaks. If pressure washer is not equipped with a fuel shut-off valve, drain the fuel from tank before transporting. Only transport fuel in an OSHA approved container. Always place pressure washer on a protective mat when transporting to protect against damage to vehicle from leaks. Remove pressure washer from vehicle immediately upon arrival at your destination.
• Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!
• Never place hands in front of nozzle.
• Direct spray away from self and others.
• Make sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation.
• Do not allow hose to contact muf­fler.
• Never attach or remove wand or hose fittings while system is pres­surized.
• Injuries can result if system pressure is not reduced before attempting maintenance or disassembly.
• To relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing.
• Use only hose and high pressure accessories rated for pressure higher than your pressure washer's p.s.i.
• Do not use acids, gasoline, kero­sene, or any other flammable materials in this product. Use only household detergents, cleaners and degreasers recommended for use in pressure washers.
• Wear protective clothing to protect eyes and skin from contact with sprayed materials.
• Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.
RISK OF
CHEMICAL
BURN
5- ENG
D25803
RISK OF UNSAFE
OPERATION
• Reactive force of spray will cause gun/wand to move, and could cause the operator to slip or fall, or misdirect the spray. Improper control of gun/wand can result in injuries to self and others.
• Do not overreach or stand on an unstable support. Grip gun/wand firmly with both hands. Expect the gun to kick when triggered.
HAZARD
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Unsafe operation of your pressure washer could lead to serious injury or death to you or others.
• Do not use chlorine bleach or any other corrosive compound.
• Become familiar with the operation and controls of the pressure washer.
• Keep operating area clear of all persons, pets, and obstacles.
• Do not operate the product when fatigued or under the influence of alcohol or drugs. Stay alert at all times.
• Never defeat the safety features of this product.
• Do not operate machine with missing, broken, or unauthorized parts.
• Never leave wand unattended while unit is running.
If proper starting procedure is
not followed, engine can kickback causing serious hand and arm injury.
• If engine does not start after two pulls, squeeze trigger of gun to relieve pump pressure. Pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury.
• The spray gun/wand is a powerful cleaning tool that could look like a toy to a child.
• Keep children away from the pressure washer at all times.
• Contact with hot surfaces, such as engines exhaust components, could result in serious burn.
• During operation, touch only the control surfaces of the pressure washer. Keep children away from the pressure washer at all times. They may not be able to recognize the hazards of this product.
RISK OF
HOT
SURFACES
RISK OF
ELECTRICAL
SHOCK
• Spray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock.
• Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.
RISK OF INJURY
FROM SPRAY
• High velocity fluid spray can cause objects to break, propelling particles at high speed.
• Light or unsecured objects can become hazardous projectiles.
• Always wear ANSI approved Z87 safety glasses.Wear protective clothing to protect against accidental spraying.
• Never point wand at, or spray people or animals.
• Always secure trigger lock when wand is not in service to prevent accidental operation.
• Never permanently secure trigger in pull back (open) position.
6- ENG
D25803
BOX CONTENTS
Bagged Handle
Bagged Parts
Nozzle Cleaning
Kit
Engine Frame and
Wheel Assembly
High
Pressure
Hose
Chemical
Hose
Engine Oil
Spray Gun
Knobs
Saddle Bolts
Quick Connect Wand
Grommet Kit
with Quick
Connect Nozzles
Engine
Manual
Handle
Parts
Manual
English/
Spanish/
French
Operator’s
Manual
The powerful spray from your pressure washer is capable of causing
damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. Avoid the use of the concentrated spray stream except for very strong surfaces like concrete and steel.
Operating without flow of water will result in equipment damage. Operating the pressure wash­er with water supply shutoff will void your warranty. You should never run this pressure washer for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit.
Loading...
+ 14 hidden pages