Porter-Cable 888971-992, CF2400, CF1540 User Manual
Specifications and Main Features
- Model No.: CF1540
- Horsepower: 1.5 HP
- SCFM coincidence at 40 psig: ‘47
- SCFM coincidence at 90 psig: 3.3
- Cut-In Pressure: 100 PSIG
- Cut-Out Pressure: 125 PSIG
- Bore: 2.375″
- Stroke: 1.350″
- Voltage/Hertz/Phase: 120 / 60 / 1
- Minimum Branch Circuit: 15 Amp
- Fuse Type: Time Delay Type “T”
- Amperage at Max Load: 15 Amps
- Tank Size: 4 Gallon
Frequently Asked Questions
- Q: What is the tank size of the CF1540 compressor?
A: 4 gallons is the tank size.
- Q: What is the horsepower of this model?
A: This is a CF1540 Model and its HP is at 1.5.
- Q: What should be done when the compressor does not start?
A: Look to see if the shell plugs connection prongs of the filament lead are well connected to the outlet and also check for fuses blown circuit breakers.
- Q: How often must I drain the tank?
A: It is advisable to drain the tank after every use or daily to keep rust and tank deterioration off.
- Q: What’s the highest amount of pressure that can be used when utilizing tools?
A: The outlet pressure coming from the regulator must never reach higher than the pressure cutoff of the tool.
User Manual
Loading...