Porter-Cable PCH3740, A08058-0412-0 User Manual
Instruction
®
manual
ESPAÑOL: PÁGINA 21
FRANÇAIS: PAGE 41
13 Horsepower
3700 PSI
4.0 GPM
Pressure Washer
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2004 Porter-Cable Corporation
PCH3740
IMPORTANT
Please make certain that the person who
is to use this equipment carefully reads
and understands these instructions before
starting operations.
The Model and Serial No. plate is located on the frame.
Record these numbers in the spaces below and retain for
future reference.
Model No.
Type
Serial No.
Part No. A08058-0412-0
SAFETY GUIDELINES - DEFINITIONS
This manual contains information that is important for you to know and understand.
This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT
PROBLEMS. To help you recognize this information, we use the symbols below. Please
read the manual and pay attention to these symbols.
Indicates an imminently
hazardous situation
which, if not avoided, will result in death
or serious injury.
Indicates a potentially
hazardous situation
which, if not avoided, could result in death
or serious injury.
which, if not avoided, may result in minor
or moderate injury.
potentially hazardous situation which, if not
avoided, may result in property damage.
Indicates a potentially
hazardous situation
Used without the safety
alert symbol indicates a
CONSUMER SAFETY INFORMATION
This product may not be equipped with a spark arresting muffler.
If the product is not equipped and will be used around flammable
materials, or on land covered with materials such as agricultural crops, forest, brush,
grass, or other similar items, then an approved spark arrester must be installed and
is legally required in the state of California. It is a violation of California statutes
section 130050 and/or sections 4442 and 4443 of the California Public Resources
Code, unless the engine is equipped with a spark arrester, as defined in section 4442,
and maintained in effective working order. Spark arresters are also required on some
U.S. Forest Service land and may also be legally required under other statutes and
ordinances.
Engine exhaust contains chemicals known, in certain quantities, to
cause cancer, birth defects or other reproductive harm.
IMPORTANT SAFETY INSTRUCTIONS
Do not operate this unit until you have read and understand this
Operation, and Maintenance Instructions.
Operators Manual and the Engine Owners Manual for Safety,
READ AND SAVE THESE INSTRUCTIONS
HAZARD
RISK OF EXPLOSION OR FIRE
WHAT CAN HAPPEN
• Spilled gasoline and it’s vapors can
become ignited from cigarette sparks,
electrical arcing, exhaust gases, and hot
engine components such as the muffler.
• Heat will expand fuel in the tank which
could result in spillage and possible fire
explosion.
• Operating the pressure washer in an explosive environment could result in a fire.
A08058
HOW TO PREVENT IT
• Shut off engine and allow it to cool before
adding fuel to the tank.
• Use care in filling tank to avoid spilling fuel.
Move pressure washer away from fueling
area before starting engine.
• Keep maximum fuel level ½" below top of
tank to allow for expansion.
• Operate and fuel equipment in well ventilated areas free from obstructions. Equip
areas with fire extinguisher suitable for
gasoline fires.
2- ENG
HAZARD
RISK OF EXPLOSION OR FIRE (continued)
WHAT CAN HAPPEN
• Materials placed against or near the
pressure washer can interfere with its proper
ventilation features causing overheating and
possible ignition of the materials.
• Muffler exhaust heat can damage painted
surfaces, melt any material sensitive to
heat (such as siding, plastic, rubber, or
vinyl), and damage live plants.
• Improperly stored fuel could lead to
accidental ignition. Fuel improperly
secured could get into the hands of
children or other unqualified persons.
• Use of acids, toxic or corrosive chemicals,
poisons, insecticides, or any kind of
flammable solvent with this product could
result in serious injury or death.
HAZARD
RISK TO BREATHING
WHAT CAN HAPPEN
• Breathing exhaust fumes will cause
serious injury or death! Engine exhaust
contains carbon monoxide, an odorless
and deadly gas.
• Some cleaning fluids contain substances
which could cause injury to skin, eyes, or
lungs.
HOW TO PREVENT IT
• Never operate pressure washer in an area
containing dry brush or weeds.
• Always keep pressure washer a minimum of
four feet away from surfaces (such as houses,
automobiles, or live plants) that could be
damaged from muffler exhaust heat.
• Store fuel in an OSHA approved container,
in a secure location away from work area.
• Do not spray flammable liquids.
HOW TO PREVENT IT
• Operate pressure washer in a well
ventilated area. Avoid enclosed areas such
as garages, basements, etc.
• Never operate unit in a location occupied
by humans or animals.
• Use only cleaning fluids specifically recommended for high pressure washers. Follow
manufacturers recommendations. Do not
use chlorine bleach or any other corrosive
compound.
HAZARD
RISK TO FLUID INJECTION
WHAT CAN HAPPEN
• Your washer operates at fluid pressures
and velocities high enough to penetrate
human and animal flesh, which could
result in amputation or other serious injury.
Leaks caused by loose fittings or worn
or damaged hoses can result in injection
injuries. DO NOT TREAT FLUID INJECTION
AS A SIMPLE CUT! See a physician
immediately!
• Injuries can result if system pressure is not
reduced before attempting maintenance or
disassembly.
HOW TO PREVENT IT
• Never place hands in front of nozzle.
• Direct spray away from self and others.
• Make sure hose and fittings are tightened
and in good condition. Never hold onto the
hose or fittings during operation.
• Do not allow hose to contact muffler.
• Never attach or remove wand or hose
fittings while system is pressurized.
• To relieve system pressure, shut off
engine, turn off water supply, and pull gun
trigger until water stops flowing.
• Use only hoses and accessories rated
for pressure higher than your pressure
washer's PSI.
3- ENG
A08058
HAZARD
RISK OF
WHAT CAN HAPPEN
• Use of acids, toxic or corrosive chemicals,
poisons, insecticides, or any kind of
flammable solvent with this product could
result in serious injury or death.
RISK OF
WHAT CAN HAPPEN
• Spray directed at electrical outlets or
switches, or objects connected to an
electrical circuit, could result in a fatal
electrical shock.
RISK OF
ELECTRICAL SHOCK
WHAT CAN HAPPEN
• Contact with hot surfaces, such as
engines exhaust components, could
result in serious burn.
CHEMICAL
BURN
ELECTRICAL SHOCK
HAZARD
ELECTRICAL SHOCK
RISK OF HOT
HOW TO PREVENT IT
• Do not use acids, gasoline, kerosene,
or any other flammable materials in this
product. Use only household detergents,
cleaners and degreasers recommended
for use in pressure washers.
• Wear protective clothing to protect eyes
and skin from contact with sprayed
materials.
HAZARD
HOW TO PREVENT IT
• Unplug any electrically operated product
before attempting to clean it. Direct spray
away from electric outlets and switches.
RISK OF
SURFACES
HOW TO PREVENT IT
• During operation, touch only the control
surfaces of the pressure washer. Keep
children away from the pressure washer
at all times. They may not be able to
recognize the hazards of this product.
RISK OF INJURY OR PROPERTY DAMAGE
WHEN TRANSPORTING OR STORING
WHAT CAN HAPPEN
• Fuel or oil can leak or spill and could
result in fire or breathing hazard, serious
injury or death can result. Fuel or oil
leaks will damage carpet, paint or other
surfaces in vehicles or trailers.
A08058
HAZARD
HOW TO PREVENT IT
• If pressure washer is equipped with a
fuel shut-off valve, turn the valve to the
off position before transporting to avoid
fuel leaks. If pressure washer is not
equipped with a fuel shut-off valve, drain
the fuel from tank before transporting.
Only transport fuel in an OSHA approved
container. Always place pressure washer
on a protective mat when transporting to
protect against damage to vehicle from
leaks. Remove pressure washer from
vehicle immediately upon arrival at your
destination.
4- ENG
RISK OF UNSAFE OPERATION
WHAT CAN HAPPEN
• Unsafe operation of your pressure washer
could lead to serious injury or death to
you or others.
• If proper starting procedure is not
followed, engine can kickback causing
serious hand and arm injury.
• The spray gun/wand is a powerful cleaning tool that could look like a toy to a
child.
• Reactive force of spray will cause gun/
wand to kickback, and could cause the operator to slip or fall, or misdirect the spray.
Improper control of gun/wand can result in
injuries to self and others.
HAZARD
HOW TO PREVENT IT
• Do not use chlorine bleach or any other
corrosive compound.
• Become familiar with the operation and
controls of the pressure washer.
• Keep operating area clear of all persons,
pets, and obstacles.
• Do not operate the product when
fatigued or under the influence of alcohol
or drugs. Stay alert at all times.
• Never defeat the safety features of this
product.
• Do not operate machine with missing,
broken, or unauthorized parts.
• Never leave wand unattended while unit
is running.
• If engine does not start after two pulls,
squeeze trigger of gun to relieve pump
pressure. Pull starter cord slowly until
resistance is felt. Then pull cord rapidly
to avoid kickback and prevent hand or
arm injury.
• Keep children away from the pressure
washer at all times.
• Do not overreach or stand on an unstable
support.
• Do not use pressure washer while
standing on a ladder.
• Grip gun/wand firmly with both hands.
Expect the gun to kickback when
triggered.
RISK OF INJURY FROM SPRAY
WHAT CAN HAPPEN
• High velocity fluid spray can cause
objects to break, propelling particles at
high speed.
• Light or unsecured objects can become
hazardous projectiles.
HAZARD
HOW TO PREVENT IT
• Always wear ANSI approved Z87 safety
glasses.Wear protective clothing to protect
against accidental spraying.
• Never point wand at, or spray people or
animals.
• Always secure trigger lock when wand
is not in service to prevent accidental
operation.
• Never permanently secure trigger in pull
back (open) position.
5- ENG
A08058
CARTON CONTENTS
Operation
Engine Frame
and Wheel
Assembly
Handle
High Pressure
Hose
Manual
Engine
Manual
Registration
Quick Connect Spray Wand
Chemical
Hose
card
Tube Bracket
Spray Gun
ASSEMBLY INSTRUCTIONS
1. Place handle assembly onto
frame, depress the snap buttons,
and slide the handle assembly
onto the frame until snap buttons
snap into place.
Knobs
Nozzle
Cleaning
Tool
Nozzle
Holder
Saddle
Bolts
Bagged Parts
Hose Reel with
parts bag
Quick
Connect
Nozzles
Engine
Oil
2. Connect tube bracket (b) to
frame using the hardware (c)
supplied.
Formed
Rubber
Covers
A08058
b
c
6- ENG
Loading...