Portech IS-640, IS-640P User Manual

IP Speaker

User manual

IS-640

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

2

【Content】

1.Introduction ................................................................................................. 1

2.Parts list: ..................................................................................................... 1

3.Panel description ........................................................................................ 2

4.Web Page Setting ........................................................................................ 3

5 Network ........................................................................................................ 5

5.1 Network Status ................................................................................................... 5

5.2 WAN Setting ....................................................................................................... 5

6. SIP Setting .................................................................................................. 6

6.1 Service Domain ................................................................................................. 6

6.2 Port Setting ........................................................................................................ 7

6.3 Codec Setting .................................................................................................... 7

6.4 Audio Setting ...................................................................................................... 8

6.5 Other Setting ...................................................................................................... 9

7.STUN Setting ............................................................................................... 9

8.Update ........................................................................................................ 10

8.1 New Firmware .................................................................................................. 10

8.2 Default Setting ................................................................................................. 12

9.System Authority ...................................................................................... 13

10.Save Change ........................................................................................... 13

11.Reboot ..................................................................................................... 14

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

1

1.Introduction

IS-640 IP Speaker provide a user-friendly control and simple

voice broadcasting. Theproduct is designed to provide easy use for any

office,department store,factory,school to be able to quickly broadcast

announcements to their any assigned office or branch orclasses (or a group of

office or branch or classes) .

2.Parts list:

2.1. IP Speaker(IS-640) main body

2.2. Network cable 2M

2.3. AC power cord 1.8M

2.4.User manual

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

2

3.Panel description

3.1 IP Reset Button : please press the button in 7-8 seconds till the status led

flash blink to restore the factory default IP 192.168.0.100

3.2 Status :

1. light turn off : standby

2. light turn on : call in status

3. light twinkle : user is speaking

3.3 Power :

1. light turn off : no power

2. light turn on : standby

3.4 LAN : Standard RJ-45 socket, connecting to Hub circuit

3.5 AC 100~240V : power socket

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

3

4.Web Page Setting

Step 1: Browse the IP address http://192.168.0.100 from Internet Explorer

Step 2: Please enter the username and password for authentication. (default

username: voip，Password: 1234). The page follows when the

username and password are correct

Step 3: When you login the web page,you can see current System Information

like Model Name,Firmware Version,Codec, Version @.etc in this page.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

4

You also can see the function lists in the left side

Include Network ,SIP Setting,STUN Settings, Update,System Authority,Save

Change , Reboot .

4.1.Network : provide Status,WAN Setting

4.2.SIP Settings : Provide Service Domain

Port Setting (SIP and RTP port setting),Code Setting,Audio Setting,Other

Setting

4.3.STUN Setting : provide STUN Setting to penetrate the Firewal。

4.4.Update : provide New Firmware (firmware upgrade),Default

Settings (restpre default setting).

4.5.System Authority : provide user to change login name and password.

4.6.Save Change :Save the changes you have done

4.7.Reboot :Restart the system.。

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

5

5 Network

5.1 Network Status

Network Status: you can check the current Network Setting in this page

5.2 WAN Setting

(1) The TCP/IP Configuration item is to setup the WAN port’s network

environment. You may refer to your current network environment to

configure the system properly.

(2) The PPPoE Configuration item is to setup the PPPoE Username and

Password. If you have the PPPoE account from your Service Provider,

please input the Username and the Password correctly.

(3) When you finished the setting, please click the Submit button.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

6

6. SIP Setting

6.1 Service Domain

In Service Domain Function you need to input the account and the related

informations in this page, please refer to your ISP Provider. You can

register three SIP accounts.

When you finished the setting,please click the Submit button. Remember to

click “Save Charge”

field

explain

Realm 1 (Default)
Active Default:Off , on: active this account
Display Name you can input the name you want to display
User Name you need to input the User Name get from your ISP.
Register Name you need to input the Register Name get from your ISP.
Register Password you need to input the Register Password get from ISP.
Domain Server you need to input the Domain Server get from your ISP.
Proxy Server you need to input the Proxy Server get from your ISP
Outbound Proxy you need to input the Outbound Proxy get from your ISP. If

your ISP does not provide the information,then you can
skip this item.

Status You can see the Register Status. Not Register(register

fail)，Register(register successful)。

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

7

6.2 Port Setting

You can setup the SIP and RTP port number in this page. Each ISP provider

will have different SIP/RTPport setting, please refer to the ISP to setup the port

number correctly. When you finished the setting, please click the Submit button

and “Save Charge”

6.3 Codec Setting

You can setup the Codec priority, RTP packet length in this page. You need to

follow the ISP suggestion to setup these items. When you finished the setting,

please click the Submit button and “Save Charge”.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

8

6.4 Audio Setting

Set speaker volume and voice detect function

Field description
Speaker Volume Default :50,maximum: 64 , minimum: 0.
Detection Sensitivity Default:32,maximum: 32 , minimum: 0
Send Detected Default:OFF;ON:send Voice detection packet,OFF:don’t

send Voice detection packet.

Send Destination Send IP Address for sending Voice detection packet.

When you finished the setting, please click the Submit button and “Save

Charge”.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

9

6.5 Other Setting

SIP Expire Time: Default:60; set register’s time interval ;range:30~86400 sec

When you finished the setting, please click the Submit button and “Save

Charge”.

7.STUN Setting

you can setup the STUN Enable/Disable and STUN Server IP address in this

page. This function can help your VoIP device working properly behind NAT. To

change these settings please following your ISP information. When you

finished the setting, please click the Submit button.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

10

8.Update

In Update you can update the system’s firmware to the new one or execute the

factory reset to let the system back to default setting.

8.1 New Firmware

Field Description
Code Type Default:Risc (.gz). Provide Risc (system firmware.gz) and DSP

(DSP firmware.ds).

File Location Click the “Browse” button in the right side of the File Location or

you can type the correct path and the filename in File Location
blank.

Setep 1: choose UpdteNew Firmware，choose Code Type: Risc and click the

“Browse” button in the right side of the File Location or you can type the

correct path and the filename in File Location blank.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

11

Setep 2:choose [gz] file ,then click [open].

Setep 3:[File Location] will show the file location and file name. after

confirm ,please click submit

Setep 4: please don’t turn power off when system updating. It is important.

The updating time is about 3 minutes.

Setep 5: After finished update firmware,please click Refresh (F5),then you can

set other settings

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

12

8.2 Default Setting

In this page: Update/ Default Settings, you could restore the factory default

settings to the system. All setting will restore default setting.

IP will retain original IP as usual not default IP.

Step1: choose UpdateDefault Setting. When you want to restore default

setting,please click [Restore]. You can clear all settings and auto refresh

as follows.

Setep 2:please wait for a moment while rebooting as follws.

Setep 3: After reboot, webpage will be back to main page. Please click

refresh(F5) ,then you can set other settings

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

13

9.System Authority

In System Authority you can change your login name and password.

When you finished the setting, please click the Submit button and “Save

Charge”.

10.Save Change

In Save Change you can save the changes you have done. If you want to use

new setting in the VoIP system, you have to click the Save button. After you

click the Save button, the system will automatically restart and the new setting

will effect.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

14

11.Reboot

Reboot function you can restart the system. If you want to restart the system,

you can just click the Reboot button, then the system will automatically.

Please don’t turn power off while rebooting,thanks

After reboot, webpage will be back to main page. Please click refresh(F5) ,then

you can set other settings

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]