PORTAPROMPT 365 Series, 365-001, 350-005, 365-015 Quick Start Manual

PORTAPROMPT

Quick Rigging Guide

365 Personal Prompting Assistant

A new, very light weight system that rigs on to 15mm bars. The system has four basic
configurations:-

1. Used for Tablet Operations

2. Used as a Passive Interrotron.

3. Used with a 7” or 9” Micro Prompt screen for Jimmy Jibs and Steadicam operations
(needs Windigi software).

4. Used with 10.4” and 12” On-camera head up display (needs Windigi software and
additional attachment clamp).

The “365 Series - Personal Prompting Assistant” a prompting device for every day of the year!

Tablet Operations Passive Interrotron.

7” or 9” Micro Prompt 10.4” /12” On-camera head up display

1

PORTAPROMPT

Product Details

 365-001 includes – Frame, Cloth Hood (Knicker),Clamps (Large Riser Clamp and Small

Rigging Clamp) and attachment screws, 2 glass Reflectors (one to go and one spare), Long
Carbon fibre and short Aluminium rigging rods and Lightweight Carrying Case

 350-005 includes i-Glue, i-Scroll and cable. Note i-Glue connects to Apple devices using

Apple’s 30 pin connector. Newer Apple devices now us e a Lightening Connector and to

connect to these you will need a Lightening Adaptor from Apple (we highly recommend this
should be an Apple product as other manufactures devices in our experience do not work!)

 365-015 includes two rigging plates and two carbon fibre bars providing a very flexible rigging

solution for most cameras

Pictured below is a 365-001 with 350-005 i-glue and i-scroll and 365-015 15mm rigging plate

350-005 i-glue and i-scroll (excludes tablet)

365-015 15mm bar rigging plate

2

PORTAPROMPT

Rigging for a Tablet

These are all the parts to rig a tablet

 Frame, Cloth Hood and Reflector
 Large Riser Clamp and Small Rigging Clamp
 Long Carbon Fibre rigging rods

This shows the how the Large Riser Clamp fits onto the Frame when using a tablet. The two long
screws fit into the Clamp and then into the two 45 angle screw fittings on the Frame.

3

PORTAPROMPT

Detail showing how the Frame is mounted (using the Large Riser Clamp) on the cameras 15 mm
bars / rig.

This shows how the Carbon Fibre bars attach to the Large Riser Clamp and how the tablet is
attached to the rig using the Small Rigging Clamp

4

PORTAPROMPT

Rigging for a Passive Interrotron

These are the parts to rig a Passive Interrotron.

 Frame, Cloth Hood and Reflector
 Large Riser Clamp and Small Rigging Clamp and long fixing screw
 Long Carbon Fibre rigging rods

You fit the Small Rigging Clamp into one the vertical fixing holes (there are 3) of the Frame using
the long screw. The Carbon Fibre Rods fix into the lower holes of the Large Riser Clamp (the top
holes are used to attach to the camera bars rigging)

5