Portable USA PU-8C User Manual

1

Digital Photo Frame

PU-8C

User Manual

Version 1.0J

2

Preface

About this manual

This manual describes how to get the most out of your new Digital Photo Frame. You should read through this manual before using the Digital Photo Frame to familiarize yourself with the various features and functions. While we strive for complete product accuracy, sometimes changes are made after printing of our manual.

3

Table of Contents

Safety Instruction …………….………………………………………………..…….5 Package Contents ………………………………………………………….6 Introduction………………………………………………………………...7 About the Digital Photo Frame……………………………………………7

1.Getting Started…………………………………………………………...9

1.1 Using the stand……………………………………………………………………...9

1.2 Mounting the Frame on the Wall…………………………………………………...9

1.3 Connecting the Power …………………………………………………………….10

1.4 Connecting to a TV……...…………………………………………………...…....10

1.5 Connecting to a Earphone…………………………………………………………11

1.6 Connecting to a Amplifier………………………………………………………...11

1.7 Inserting & Removing the Flash Memory Cards………………………………….12

1.8 Replacing Remote Control Battery……….……………………………………….13

2.Menu……………………………………………………………………..14

2.1 Photo……………………………………………………………………………….14

2.2 Video……………………………………………………………………………....14

2.3 Audio………………………………………………………………………………15

2.4 Setting ……...…………………………………………………………………….16

2.4.1 Photo Set Up………………………..………………………………………....16

2.4.1.1 Thumbnail Digest………………………………………………………….16

2.4.1.2 Transition Mode…………………………………………………………...16

2.4.1.3 Orientation………………………………………………………………...16

2.4.1.4 Digest Style………………………………………………………………..17

2.4.2 Music Setup………………………………………..………………………….17

2.4.2.1 Repeat Mode………………………………………………………………17

2.4.3 Movie Setup………………………………..………………………………….18

2.4.3.1 Repeat Mode………………………………………………………………18

2.4.3.2 Digest Style………………………………………………………………..18

2.4.4 Slideshow Set Up………….………………………………………………….19

2.4.4.1 Slideshow Mode…….……………………………………………………..19

2.4.4.2 Folder Repeat……………………………………………………………...19

2.4.4.3 Interval Time………………………………………………………………19

2.4.4.4 Transition………………………………………………………………….19

2.4.4.5 Auto Start………………………………………………………………….19

2.4.5 LCD Set Up………………………………………………………….………...20

2.4.5.1 Bright…………………...………………………………………………....20

2.4.5.2 Contrast……………………………………………………………………20

2.4.5.3 Backlight……………………...…………………………………………...20

2.4.5.4 Setup Values…………………………...………………………………….21

2.4.6 Preferences……………………………………………………………………21

2.4.6.1 TV Type…………………………………………………………………...21

2.4.6.2 TV Display..……………………………………………………….………21

2.4.6.3 Video Output.………………………………………………..…………….22

4

2.4.6.4 OSD Language…………………………………………………………….22

2.4.6.5 OSD Message……………………………………………………………...22

2.4.6.6 Set Up Values……………………………………………………………..22

2.4.7 Mode Not Supported ………………………………………………………... 23

2.5 File Explorer……..………………………………………………………..……...23

2.5.1 Copy………………………………………………………………………....23

2.5.2 Delete………………………………………………………………………..24

2.5.3 Rename…….………………………………………………………………..24

2.5.4 New Folder.……….………………………………………………………...24

2.5.5 Properties……………………………………………………………………25

3.Troubleshooting……………………………………………………………………....26

4.Specifications………………………………………………………….………………27

5

Safety Instructions

6

Package Contents

Remote Control

Adaptor

Player

AV cable

User Manual

Printed

7

Introduction

This Digital Photo Frame features :

·8” TFT LCD screen for displaying images from a flash memory card.

·Support for JPEG images up to 12 Megapixels.

·Image display functions such as slideshow and image rotation.

·Support for CF, SD, MMC and MS, XD, MS Pro flash memory cards.

·Support for MPEG4 for playing back film clips.

·Playing an MP3 as background to a Slideshow.

·A single stand or wall mount enabling you to place the Digital Photo Frame on a desk

or mount it on a wall.

About the Digital Photo Frame

This section describes the various parts of the Digital Photo Frame. ALL VIEW

10

9

11

8

12

6

5 4

7

3

2

1

/ MENU

Items

Functions

1.Power On/Off/Menu

Turn the Digital Photo Frame on and off & Press to display menu

8

2.Enter

Used to confirm a setting or function

3.Forward

Used to navigate forwards.

4.Up

Used to navigate upwards.

5.Down

Used to navigate downwards.

6.Backward

Used to navigate backwards.

7.CF Card Slot

Slot for CF card.

8.5 in 1 Card Slot

Slot for SD/MMC/XD/MS/SM

9.DC in Socket

Power Connection to the adaptor.

10.Stand

Placing the Digital Photo Frame on a desk..

11.Infrared Sensor

Used with remote control

12.AV Out

Connect an AV cable for viewing a TV, earphone & amplifier.

RCU Keys

Vol - Vol + Mute

Photo Video Config Files

Zoom Menu

Rotate

File

Detail

Cancel

Enter

TV/LCD

EQ Set

M_SLIDESHOW

1

2

3

4

5

6

7

8

9

10 11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

1

Turn the power on and off 2

Video mode 3

Photo mode 4

Rotate the image in photo mode 5

Zoom the image 6

Used to navigate backwards 7

Show the file detail in photo mode 8

Play MP3 as background during slideshow 9

Equalizer setting 10

Skip to previous chapter or track 11

Fast forward 12

Repeat slideshow & video playback 13

Set video output in TV or LCD 14

LED 15

Skip to next chapter or track 16

Fast reverse 17

Stop the functionality currently running and return to Main Menu 18

Used to navigate downwards 19

Used to navigate forwards 20

Play, Pause & Display menu or to confirm a setting or function 21

Stop the functionality currently running and return to Main Menu 22

Used to navigate upwards 23

Files mode 24

Set-up mode 25

Mute the audio output 26

Increase volume 27

Reduce volume

9

1.GETTING STARTED

1.1 Using the Stand

The Digital Photo Frame can be placed in a landscape or portrait position on a desk or any other flat surface by removing the screw on the stand of the Digital Photo Frame.

Remove the screw

1.2 Mounting the Frame on the Wall

Digital Photo Frame can also be mounted on the wall on landscape or portrait position by place the hanging holes “A” at the rear housing of Digital Photo Frame over the screw or nail in the wall.

'A'

10

1.3 Connecting the Power

Connect the included power supply to your AC outlet and plug in the other end of the AC adaptor to the DC-IN jack of Digital Photo Frame.

TO TURN OFF THE POWER:

Press the POWER button for 3 seconds to turn off the power.

1.4 Connecting to a TV

Connect the Digital Photo Frame to view pictures and video.

1. Insert the AV cable(yellow) video plug into the TV video socket.

2. Insert the AV cable(white and red) audio plugs into the TV’s corresponding AV IN

sockets. If the TV only has one audio in socket, insert either of the audio plugs.

3. Insert the other end into the Digital Photo Frame AV OUT socket.

4. Make sure the Digital Photo Frame is set to the right TV system; NTSC or PAL.

AV IN

R L VIDEO

11

1.5 Connecting the Earphone

To connect the earphone, insert the earphone’s plug into the Digital Photo Frame’s AV OUT socket.

1.6 Connecting to an Amplifier

Connecting the Digital Photo Frame to an Amplifier

1. Insert the AV cable(white and red) audio plugs into the amplifier corresponding AV IN sockets.

2. Insert the other end into the Digital Photo Frame AV OUT socket.

AMPLIFIER

AV IN

R L

12

1.7 Inserting & Removing the Flash Memory Cards

Inserting a CF Card

1. Position the CF card so that the pin-hole connections are facing the bottom flash memory card slot. Place the card label-side up.

2. Slide the card gently into the slot until it touches the bottom.

Inserting Other Types of Cards (SD/MMC/XD/MS/MS )

1. Position the SD/MMC/XD/MS/MS cards so that the pin hole connections are facing the bottom flash memory card slot. Place the card label-side up.

2. Slide the card gently into the slot until it touches the bottom.

Removing a Memory Card

To remove a memory card, gently pull the card out of the slot.

NOTE:

Do not remove the memory card while operating. Please turn off the power before removing the memory card. Otherwise, memory card data loss or damage may occur.

13

1.8 Replacing Remote Control Battery

Step 1- Remove the battery compartment by pulling the cover in the direction of the arrow. Step 2- Remove the battery Step 3 -Insert the replacement battery must follow the correct polarity(+/-).

14

2.MENU

2.1 Photo

On the main menu, use the►/◄ buttons to choose “Photo” and press “ENTER” button to enter “Photo” mode. You can view photos as thumbnails in matrix images which can be set in Digest Style mode.

Use ►/◄ & ▲/▼ buttons to select a photo.

Press “ENTER” button to view a photo selected.

2.2 Video

On the main menu, use the ►/◄ buttons to choose “Video” and press “ENTER” button to enter Movie Folders.

15

Movie folders will be displayed.

Choose the movie folder to be displayed and press “ENTER”.

2.3 Audio

On the main menu, use the►/◄ buttons to choose “Audio” and press “ENTER” button to enter “Audio” mode.

Press “File Detail” button on remote control to enter Music Library..

Press “EQ Set” button on remote control to select Music 2Equalizer types such as “rock”, “pops”, “ballad”, “dance”, “standard”, “classic”, & “jazz”..

16

2.4 SETTING

On the main menu, use the ►/◄ button to choose “Setting” and press “ENTER” button to enter “Setting” menu..

2.4.1 PHOTO SETUP In SETUP menu, use ▲/▼ buttons to select

“PHOTO SETUP”. Use “ENTER” button to enter “PHOTO SETUP” submenu.

2.4.1.1 THUMBNAIL DIGEST You can view photos as thumbnails. This is another way of browsing for a particular photo.

Press ► button and then use ▲/▼ buttons to select “ON” or “OFF” setting mode. Press “ENTER” button to enter.

2.4.1.2 TRNASITION MODE You can set the transition mode in “FAST” or “SLOW” speed.

Press ► button and then use ▲/▼ buttons to select “FAST” or “SLOW” setting mode. Press “ENTER” button to enter.

2.4.1.3 ORIENTATION You can set the ORIENTATION in “DEFAULT” or “IGNORE” mode.

Press ► button and then use ▲/▼ buttons to select “DEFAULT” or “IGNORE” setting mode. Press “ENTER” button to enter.

17

2.4.1.4 DIGEST STYLE You can set the DIGEST STYLE in “2X2 MATRIS”, “3X3 MATRIX”, “4X4 MATRIX” & “5X5 MATRIX” mode.

Press ► button and then use▲/▼ buttons to select Matrix size desired. Press “ENTER” button to enter.

To exit the PHOTO SETUP menu, choose “MAIN PAGE” mode & press “ENTER” button.

2.4.2 MUSIC SETUP In MUSIC SETUP menu, use ▲/▼ buttons to

select “MUSIC SETUP”. Use “ENTER” button to enter “MUSIC SETUP” submenu.

2.4.2.1 REPEAT MODE You can set the REPEAT mode in “ONE”, “OFF” or “ALL” .

Press ► button and then use ▲/▼ buttons to select “ONE”, “OFF” or “ALL” setting mode. Press “ENTER” button to enter.

To exit the REPEAT mode, choose “MAIN PAGE” mode & press “ENTER” button.

18

2.4.3 MOVIE SETUP In MOVIE SETUP menu, use ▲/▼ buttons to

select “MOVIE SETUP”. Use “ENTER” button to enter “MOVIE SETUP” submenu.

2.4.3.1 REPEAT MODE You can set the REPEAT mode in “ONE”, “OFF” or “ALL” .

Press ► button and then use ▲/▼ buttons to select “ONE”, “OFF” or “ALL” setting mode. Press “ENTER” button to enter.

2.4.3.2 DIGEST STYLE You can set the DIGEST STYLE mode in “2X2”, “3X3”, “4X4” or “5X5” MATRIX .

Press ► button and then use ▲/▼ buttons to select the matrix setting mode. Press “ENTER” button to enter.

To exit the MOVIE SETUP mode, choose “MAIN PAGE” mode & press “ENTER” button.

2.4.4 SLIDESHOW SETUP In SETUP menu, use ▲/▼ buttons to select

“SLIDESHOW SETUP”. Use “ENTER” button to enter “SLIDESHOW SETUP” submenu.

19

2.4.4.1 SLIDESHOW MODE You can set the SLIDESHOW MODE in “MANUAL” or “AUTO” mode.

Press ► button and then use ▲/▼ buttons to select “MANUAL” or “AUTO” setting mode. Press “ENTER” button to enter.

2.4.4.2 FOLDER REPEAT You can set the FOLDER REPEAT in “ON” or “OFF” mode.

Press ► button and then use▲/▼ buttons to select “ON” or “OFF” setting mode. Press “ENTER” button to enter.

2.4.4.3 INTERVAL TIME You can set the INTERVAL TIME in “1 sec”, “3 sec”,”5 sec” or “10 sec” mode.

Press ► button and then use ▲/▼ buttons to select the interval time desired. Press “ENTER” button to enter.

2.4.4.4 TRANSITION You can set the TRANSITION in 9 effect modes as shown in display screen..

Press ► button and then use▲/▼ buttons to select the slideshow effect desired. Press “ENTER” button to enter.

2.4.4.5 AUTO START You can set the AUTO START in “ON” or “OFF” modes.

Press ► button and then use ▲/▼ buttons to select the “ON” or “OFF” modes. Press “ENTER” button to enter.

20

To exit the SLIDESHOW SETUP menu, choose “MAIN PAGE” mode & press “ENTER” button.

2.4.5 LCD SETUP In LCD SETUP menu, use ▲/▼ buttons to

select “LCD SETUP”. Use “ENTER” button to enter “LCD SETUP” submenu. LCD SETUP enables you to configure setting such as brightness, contrast, saturation, hue & backlight.

2.4.5.1 BRIGHT You can set the BRIGHT mode in level 1 to level 6.

Press ► button and then use ▲/▼ buttons to select the level desired. Press “ENTER” button to enter.

2.4.5.2 CONTRAST You can set the CONTRAST mode in level 1 to level 6.

Press ► button and then use ▲/▼ buttons to select the level desired. Press “ENTER” button to enter.

2.4.5.3 BACKLIGHT You can set the BACKLIGHT mode in level 1 to level 6.

Press ► button and then use ▲/▼ buttons to select the level desired. Press “ENTER” button to enter.

21

2.4.5.4 SETUP VALUES You can set the SETUP VALUES mode in DEFAULT . Press ► button and then “ENTER” button to enter.

To exit the LCD SETUP menu, choose “MAIN PAGE” mode & press “ENTER” button.

2.4.6 PREFERENCES In SETUP menu, use ▲/▼ buttons to select

“PREFERENCES”. Use “ENTER” button to enter “PREFERENCES” submenu.

2.4.6.1 TV TYPE You can set the TV TYPE in “MULTI SYSTEM”, “NTSC” or “PAL” modes.