PORT CMD0450 Quick Setup Manual

FOLD

FOLD

FOLD

TRIM

TRIM

FOLD

FOLD

FOLD

TRIM

TRIM

TRIM

TRIM

SmartConnect
Quick Setup Guide

Plug AC power cord into jack

& wall outlet.

1

Unplug handset from phone
and plug in here:

2

Plug straight
cord into phone’s
handset jack:

3

Plug cord from teleconference unit or modem
into Voice/Data port:

4

(Continued
other side.)

TRIM

TRIM

TRIM

TRIM

TRIM

TRIM

FOLD

FOLD

FOLD

TRIM

FOLD

FOLD

FOLD

TRIM

TRIM

TRIM

5

Get outside line to check setup.

Listen for dialtone.
Hang up.

6

Move ring to unlock position:

Press LEARN button.
Green light will flash.

LEARN

LEARN

7

Wait 3 seconds. Green
light will stop flashing.

8

Move to lock position:

Lift handset to use
modem or teleconference unit.

Q UESTIONS? CALL T ECHNICAL S UPPORT

© P

ORT

, INC. 1999 #253-992 REV. 3/99

LEARN

LEARN

or visit us at www.port.com

1-503-684-3147

!

WARNING! DO NOT PLUG
SMARTCONNECT DIRECTLY TO PHONE LINE!

Use this guide each time you
set up SmartConnect on a new phone.

Get outside line again.