Popp INTERACT3 User Manual

1

User manual
Wireless adaptor plug switch IP 20/IP 44, wireless adaptor plug dimmer
German/English

NTER

A

C

T

53916.00.001.01

Wireless adaptor plug switch IP 20 (Model ZW ZS 3500)

53917.00.001.01 Wireless adaptor plug switch IP 44 (Model ZW ZSA 3500)

53918.00.001.01 Wireless adaptor plug dimmer (Model Z-DAN 300)

2

NTERACT

3

INTERAC

T

Dear INTERACT3 user:

You can download this user manual in an appropriately larger
format from our internet website www.popp.eu.

Our service hotline is available for further product-relevant
questions at the service line: +49 (0) 92 73/73-150.

Index of contents/overview of chapters

1. General information on “Z-Wave” .........................................6

2. General information ..................................................................9

2.1 LED indication .............................................................................9

3. Before installation/startup .......................................................9

4. General Information on wireless plug adaptors ............10

5. Functions/operation ...............................................................13

5.1 Network inclusion ...................................................................13

5.2 Operation ................................................................................. 14

5.3 Special function wireless plug adaptor dimmer ..............15

5.4 Special function Child Protection ....................................... 15

5.5 Reset .............................................................................................16

5.6 Including a wireless plug adaptor

into third-party networks .......................................................18

6. Technical Data .........................................................................19

7. Guarantee ................................................................................20

4

NTERACT

5

INTERAC

T

1. GENERAL INFORMATION ON “Z-WAVE”:
INTERACT³ is a radio system that is based on Z-WAVE
technology. INTERACT³ off ers a varied range of advanta­ges in comparison to other radio systems:

Safe:

Generally, radio systems build a direct link between the trans­mitter and the receiver. The radio signal is attenuated by every
obstacle along its path (in the household e.g. wall, furniture
etc.), in the worst case the radio system ceases to function. The
advantage of the intelligent INTERACT³ sys tem is the so - called
routing function: All devices of INTERACT³ not only act as the
transmitter or the receiver but also simultaneously as the “re­peater”. Should a direct radio link between the transmitter and
the receiver not be possible, communication will be established
with the assistance of other devices.

Communicative:
INTERACT³ is a bidirectional radio system. This means that a

signal is not just sent but also a feedback confi rming the recep­tion of the signal occurs automatically. The safety of transmission
of the INTERACT³ radio bus technology is comparable with that
of a wire-linked bus system. It is likewise possible to determine
the switching status by pushing a button: Has the cellar light been
defi nitely switched off ?

Trouble-free:
INTERACT³ transmits at a regulated frequency band with a fre-

quency of 868 MHz. Every INTERACT³ network has its own
unique network identifi cation. Therefore, it is possible to operate
two or more independently-operating networks in a room or home
without any interferences. Troubles that can be caused by other
devices, as is the case in open, non-regulated frequencies
(e.g. 433 MHz) are excluded.

6

NTERACT

7

INTERAC

T

Established:

Although the Z-Wave technology is new, it has already develo-
ped to form a technical standard. Renowned manufacturers from
various fi elds off er solutions and applications that are based on
Z-Wave technology and compatible among one another. This
makes the system fi t for the future and promises further upgrade
phases. Further information can be found on www.z-wave.

com.

Dynamic:
INTERACT³ is equipped with a dynamic network structure. Right

from the start, the position of the individual INTERACT³ devices
who are supplied with 230 Volts is monitored and automatically
updated in the case of changes. As a means of which it is pos­sible to continuously adapt the network to its individual require­ments, wholly automatically without the necessity of any program­ming tasks.

2. GENERAL INORMATION:

2.1 LED indication:

Yellow: device is switched on.

Blue: device is switched off .

Red: device defective/

Confi guration not successful.

Blinking yellow: device is dimming up.

Blinking blue: device is dimming down.

Green: Confi guration successful.

Red/Green blinking: device is not programmed.

Red/yellow/green: Reset is accomplished.

Short green light: Child protection is deactivated.

Blinking red: Child protection is activated.

Thermoswitch is activated