Pope PATH SWEEP 101BL12V Operator's Manual

PATH SWEEP

12V Cordless Blower

Model Number 101BL12V

Operator’s Manual

WARNING

To reduce the risk of injury, the user must read and

understand the Operator’s Manual. Save this manual.

!

Introduction

Thank you for purchasing a Pope product.
We would like you to be completely satisfi ed with your new product, so feel free to contact Pope

for help with any information you require.
Pope’s Customer Service Centre Number is 1300 134 880.
Please read this manual carefully to learn how to operate and maintain your product correctly. It

is important to consult these instructions in order to acquaint yourself with the tool, its proper use
and safety precautions.

Please observe the general maximum operating times as well as local regulations for tool
operation.

Should this product require repair under the conditions of the warranty, please return it to the
place of purchase. You will need to provide proof of purchase to obtain a free of charge repair,
or a replacement.

Keep these instructions in a safe place.

For your records, attach your receipt here.

SAFETY RULES

WARNING

Read and understand all instructions when using the Pope Cordless
Path Sweep. Basic precautions including the following should be

followed to reduce the risk of a hazardous situation. Read all of these
safety instructions carefully before you use the Power Sweep. Make sure
that you are familiar with the controls and forces generated when using
this product.

Physical Condition of the Operator. Do not operate this product when tired, ill or under the

infl uence of alcohol, drugs or medication.
Clothing Requirements. Always wear long heavy pants, boots and gloves. Do not wear

loose clothing, jewellery, short pants, sandals or go barefoot. Secure hair so that it is above
shoulder level to avoid entanglement in moving parts.

Protective Accessories Requirements. Wear safety eye protection when operating this
product. Wear hearing protection during extended periods of operation.

Conditions of Product Before Use. Inspect condition of the product before use. Only
operate the tool when it is in good working order and is not damaged in any way. Damaged
parts have to be replaced immediately by a qualifi ed electrician. Never use the tool if any of
its safety devices or guards are damaged or missing.

. Never operate the product with any air openings or vents blocked. Keep

free from dust, lint, hair and anything that may reduce air fl ow.

Proper Stance. Keep fi rm footings and balance. Do not overreach.
Dangerous Environments. Do not use the product in damp or wet locations. Do not

expose the tool to wet conditions. Do not leave the product outdoors.
Work Area. Clear the area of bystanders, pets and children as there may be a risk to

bystanders from thrown objects. If you are approached while operating the product, stop the
motor.

Condition of the Path Sweep before Use. The Path Sweep shall be assembled according
to the manufacturer’s instructions. Failure to use the proper parts may cause product failure
or increase the risk of injury to the user.

Use the Right Product. Do not use it for any other purpose.
Use of Product. Never allow children or infi rm persons to use the tool. Never allow other

persons who are not familiar with the operating instructions to use the tool. Never use the
tool when there are people, particularly children or pets nearby.

Responsibility. The user is responsible for any accidents or hazards suffered by third
parties or their property.

Maintenance. Switch off the tool prior to any inspection.
Plugs. Plug connections must have earthing contacts and be protected from water.
Read and understand all instructions. Failure to follow all instructions may result in

•

•

•

•

•

•

•

•

•

•

•

•

•

•

!