PopCycle Metro 500p User Manual

USER GUIDE

The 21st Century will be the one to resolve the problem between the development of means of
transportation and the downgrade of the quality of life.

The electric bicycles are means of transportations that are clean and contribute in the upgrade of the
quality of life for all.

The electric bicycle is a Product way ahead of its time in this Field, conceived with its strict
criteria’s of esthetics, ergonomics and transportation.

This bicycle is conceived for a driver, without the possibility of a passenger. It is conceived for
usage on the road.

Driving the electric bicycle demands a special effort on your part for safety issues.
Before assembly make sure to perform:

- An inspection of the bike before starting off to avoid accidents and damaging materials.

- Never let an inexperienced driver ride your electric bike.

- Wear bright color clothing while driving at night.

- Do not ride on the blind spot of other drivers.

- Do not cut or fish tail other drivers.

- Respect the vehicle code of your state.

- Respect the speed limits.

- Signal before turning.

- Be very careful at intersections, parking exits, etc.

- Always ride with both hands on the steering and feet on the pedals.

Protective Gear

- For your safety, always wear a helmet, glasses and protective clothing.

- Do not wear loose clothing with risk of getting it tangled on wheels, steering, etc.

Bike Modification

All modification on the electric bicycle is completely forbidden .It could make riding the electric
bicycles very dangerous.

The Strong Points

Thanks to a drastic quality control, a severe selection of components and an assembly which
complies with the rules of the art, this electric bike is one of the best products in today’s market.

 A power assisted wheel equipped with a powerful motor which offers a high resolution

ignition ,a very low sound emission ,an easy hill climb and a capacity of prolonged battery
life

 Braking system: Brakes of quality (drum brakes in front and expansion brakes in the back)

activation of brakes automatically turns the motor off, which causes a braking system which
is more efficient.

 Control system: protection against lack of tension, surcharge, motor being blocked, soft

ignition to lower noise resolution, electromagnetic brakes by lowering current, display of
battery level

 Battery: Especially conceived for electric vehicles.
 Frame: High quality stainless steel frame

Technical Characteristic

Dimensions (LxlxH)

164.5*62*101cm

Net weight (without battery)

47.8KGS

Max loading weight

125KGS

Maximum speed

□20km/h

□25km/h

□32km/h

□42km/h

Battery life

□>300 times

□>500 times

□>1000 times

Battery capacity (48V)

□14Ah lead-acid

□12Ah lithium

□14Ah lithium

□20Ah lithium

Charge time

□2-4 hours

□4-6hours

□4-8hours

□6-8hours

□10-12hours

Rated Motor power

□500W

□800W

Front light

Handle bars

Rear view Mirror

LCD Screen

Front Storage Box

Front fork

Ignition switch

Helmet Hook

Front Tire

Wheel

Pedal

Crank

Stand

Shock absorber

Foot peg

Protection cover

Expansion brake

Turn signal light

Brake light

Electric Motor

Seat

Battery compartment

under the seat

Location of the components

Rear Tire

Plate Holder

Pedal Installation

Step

Initial step

Piece

Actions

Intermediary state or

final

ATTENTION

1

Crank

Align the wholes of the
crank with the fixation
support

2

Bolt

Fasten the crank to its
support with the bolt that
is planned for this effect,
screw bolt very tightly

3

Cap

Place cap on top of bolt.

View from above of a
correct installation, one
crank toward the front
and one crank toward
back.

4

Pedal

Install pedal, proceed
with second one paying
attention to its direction
(see picture on the right).

Installation of front storage box

Step

Initial state

Actions

1

Unscrew the 2 top screws with the help of a
Phillips screw driver, keep screws on the side.
Locate the 4 fixation points.

2

Take storage box out of packaging and open
as shown in the picture on left.
You will then be able to locate the 4 holes of
fixation.

3

Coincide the holes of the storage box with the
fixation points on frame, and then fasten the
storage box to the fixation points with the
screws that were put on the side in step 1 and
the 2 screws from inside the storage box.

View from inside

NOTE: The storage box is mostly preassembled prior to delivery.