Page 1
Clori-Critters™ Instructions
32130 Clori-Duck™ Mallard Chlorine Dispenser
32131 Clori-Duck™ White Duck Chlorine Dispenser
32132 Clori-Critter™ Alligator Head Chlorine Dispenser
770 Del Paso Road, Sacramento, CA 95834-0308
Step 1
• Align 4 groves on regulating cup with 4 rails on outer cup to allow inner
dispenser to drop below outer cup. Inner dispenser cup holds up to 3
inch Chlorine Tablets. Screw outer cup onto Cloricritter™ base.
UNDER NO CIRCUMSTANCES should you ever mix any type of
CHLORINE with BROMINE or ANY OTHER CHEMICAL!
Step 2
• To increase chlorine level,
twist regulating cup to
Directions
reveal more open slots.
Step 3
• Place CLORICRITTER™ in your pool. After 24
hours, check chlorine residual with proper
test kit to make sure reading is between
2.0 and 3.0 ppm. If the reading is low, twist
regulating cup to reveal more open slots.
After another 24 hours, repeat testing and
continue to twist regulating cup to reveal
more open slots until a satisfactory chlorine
residual is obtained. If chlorine is too high,
twist regulating cup to close excess slots.
Step 4
• Drain water from base completely when
removing from pool.
Mixing chemicals may result in FIRE and/or EXPLOSION.
Use caution when filling cartridge. Do not inhale fumes.
KEEP OUT OF REACH OF CHILDREN. THIS IS NOT A
TOY. Not recommended for liner pools.
Need Assistance?
Call our Customer Service Line:
800.854.1492
Visit our website @ poolmaster.com
eMail us @ [email protected]
032014
Loading...