Pontiac Bonneville 2005 User Manual

Instrument Panel . . . . . . . . . . . . . . . . . . . . . . . . . .2

Instrument Panel Cluster . . . . . . . . . . . . . . . . . . .3

Memory Driver’s Seat and

Outside Rearview Mirrors . . . . . . . . . . . . . . . . . . .4

Remote Keyless Entry and

Content Theft-Deterrent Systems . . . . . . . . . . . .5

Driver Information Center (DIC) . . . . . . . . . . . . . .6

Personalizing Vehicle Features . . . . . . . . . . . . . .6

Systems Monitor Buttons . . . . . . . . . . . . . . . . . . .9

Congratulations on your purchase of a Pontiac Bonneville. Please read this information and your Owner Manual to ensure an outstanding ownership experience. Note that your vehicle may not include all the features described in this booklet. Place this booklet in your Owner Manual portfolio for easy reference.

Climate Control Systems . . . . . . . . . . . . . . . . . .10

Audio Systems . . . . . . . . . . . . . . . . . . . . . . . . . .12

Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Accessory Power Outlet and

Cigarette Lighter . . . . . . . . . . . . . . . . . . . . . . . . .14

HomeLink

Transmitter . . . . . . . . . . . . . . . . . . . .14

OnStar® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Roadside Assistance . . . . . . . . . . . . . . . . . . . . .16

My GMLink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Instrument Panel

Getting to Know Your Bonneville

A. Air Outlets B. Turn Signal/Multifunction Lever C. Audio System Steering Wheel

Controls (if equipped) D. Windshield Wiper Lever E. Steering Column Shift Lever

(if equipped)

F. Driver Information Center (DIC)

Controls (if equipped) G.Audio System H. Hazard Warning Flashers Control I. Twilight Sentinel®Controls and

Fog Lamps Button J. Ignition Switch

See Section 3 of your Owner Manual.

K. Climate Control System L. Heated Seat Switches

(if equipped)

M.Traction Control Button

(if equipped) N. Cigarette Lighter O.Glove Box

Instrument Panel Cluster

Your vehicle’s instrument panel is equipped with this cluster or one very similar to it. The instrument panel cluster includes these key features:

A. Oil Pressure Gauge B. Tachometer C. Coolant Temperature Gauge D. Fuel Level Gauge E. Transmission Range Selector

F. Speedometer G.Odometer/Trip Odometer H. Voltmeter I. Compass Display J. Driver Information Center

(DIC) Display (if equipped)

See Section 3 of your Owner Manual.

IMPORTANT:

The instrument panel cluster is designed to let you know about many important aspects of your vehicle’s operation. It is important to read your Owner Manual and become familiar with the information being relayed to you by the lights, gauges and indicators, as well as what action can be taken to ensure safety and to prevent damage.

Getting to Know Your Bonneville

Memory Driver’s Seat and Outside Rearview Mirrors (if equipped)

Your vehicle may be equipped with a two-driver memory function that is used to program and recall settings for the driver’s seat and outside mirror positions. (The Driver Information Center (DIC) can also be programmed to personalize additional functions. See the DIC section of this booklet for more details.)

To program the driver’s seat and mirror positions

• Adjust the driver’s seat and both outside rearview mirrors to the desired positions.

• Press and hold button 1 on the driver’s door panel for three seconds, until one beeps sounds indicating that the position is stored.

For a second driver, repeat the same procedure using button 2.

To recall the driver’s seat and mirror positions

• With the vehicle in Park (P), press and release button 1 or 2. The memory positions for the seat and outside mirrors are recalled.

• To stop memory feature movement at any time, press one of the power seat controls or memory buttons.

Remote Keyless Entry/ Ignition Key recall

If programmed to do so through your vehicle’s Driver Information Center(DIC), the unlock button on the Remote Keyless Entry transmitter can be used to recall memory seat and/or DIC personalization settings.

The number 1 or 2 on the back of the Remote Keyless Entry transmitter (shown above) corresponds to the memory control numbers located on the driver’s door panel.

Set and recall driver’s seat exit position

1. Identify the driver number by pressing the unlock button on the Remote Keyless Entry transmitter (shown at right) or the number on the driver door panel (the one that corresponds with the number on the back of your personal Remote Keyless Entry transmitter).

2. Adjust the driver seat to the desired exit position; then press and hold the

EXIT button on the driver door panel until one beeps sounds, confirming that the exit position is stored.

3. Set the exit memory position for a second driver by identifying Driver 2 with the button on the door panel or the Remote Keyless Entry transmitter marked with “2” on the back. Repeat the procedure.

4. To recall the exit position, press the EXIT button on the driver door panel when the vehicle’s gear selector is in the Park (P) position.

You can stop seat recall movement at any time by pressing the power seat control located on the outboard side of the front seat.

See Sections 2 and 3 of your Owner Manual.

Remote Keyless Entry and Content Theft-Deterrent Systems

On equipped vehicles, use your Remote Keyless Entry transmitter to:

• Unlock the vehicle doors, by pressing the Unlock button ( ) once to unlock the driver door and twice to unlock both doors.

• Lock the doors and arm the Content Theft-Deterrent System, by pressing the Lock button ( ) once to lock all doors and arm the Content Theft-Deterrent System.

The exterior lamps may flash once and the horn may chirp if the Driver Information Center personalization feature is programmed. (See Security Feedback in the Personalizing Vehicle Features section for details.)

• Unlock the trunk lid by pressing the Trunk Lid Release button ( ) or by using the button located in the glove box.

• Sound a remote alarm that honks the horn and blinks the headlamps and taillamps by pressing the button with the horn symbol ( ).

On equipped vehicles, the Content Theft-Deterrent System will arm only if you use the key fob or lock the doors with a power lock switch. It will not arm if you lock the door with a key or use the manual door lock. To turn off the alarm, press the Unlock button on the key fob or unlock any door with the key.

The key fob transmitter’s range is from 3 to 30 feet. If it doesn’t work or if range is reduced, check the:

• Distance — you may be too far away.

• Location — other vehicles or objects may be blocking the signal.

• Battery in the transmitter.

• Match of the transmitter to the vehicle (see Owner Manual, Section 2).

Driver 1 and 2 Memory Settings

The number on the back of the transmitter (1 or 2) corresponds to the memory button numbers on the driver’s door panel. When the vehicle is unlocked with the transmitter, it recalls the personalized settings for that specific driver (when enabled in the Driver Information Center).

See Section 2 of your Owner Manual.

+ 11 hidden pages