Pond Boss PROFTN51003L User Manual
½ HP Floating Fountain with Lights
ITEM #PROFTN51003L
PACKAG E CONTENTS
WARNINGS AND CAUTI ONS
Part
Description
Quantity
Floating Attachment Assembly
with LED lights
B
Trumpet Nozzle
1 C Single Tier Nozzle
1 D 3 Tier Nozzle
1
E
Transformer
1
F
Sensor
1
G
Pump with cord for LED li ght
1 H Tether Line
1 I Ground Anchor
3
REMINDER
BEFORE RETURNING TO STORE.
Questions, problems, m i ssing parts? Before retur nin g
A
B C D
E F G
H I I
I
CALL 1-888-755-6750
A
to your retailer, call our cust om er ser vice department at
1-888-755-6750, 8 a.m.-6 p.m., EST, Monday-Friday, or
email us at customercare@thepondboss.net. O r visit our
website www.thepondboss.net.
1
WARNING
• Risk of electrical shock. This fountain is supplied with a grounding conductor and grounding–type
attachment plug for pump. To reduce the risk of electric shock, be certain that it is connected only to a
properly grounded, grounding- type receptacle.
• Do not exceed the voltage show n on the pump and transfor mer.
• Always di sconnect fountain f rom the power source before beginning any maintenance or work on the
pump.
• Inspect cord for damage before installation and/or maintenance. Replace the entire fountain assembly
if damage is found.
• Do not remove the grounding p in from the power cord plug.
• Risk of e lectri cal shock – This fountain has not been investigated for use in swimming pool or marine
areas.
PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
CAUTION
PREPARATION
ASSEMBLY INSTRUCTIONS
B C D
• This fountain has been evaluated for use with fresh water only.
• Use a proper power source as in dicated on the pump and trans former label.
• Keep the cord away from hig h temperatures or other heat sour ces.
• Do not let the fountain pump run dry. Pump must be completely submerged for proper operation and
cooling.
• Operate in fresh water only. Avoid heav ily chlorinated water and wat er with high pH levels.
• Do not pull the fountain by its power cord.
Before beginning assem bl y or operation of product, make sure all parts are present. Compare parts with
package contents list an d diagram above. If any part is miss in g or damaged, do not attempt t o assemble,
install or operate the product. Contac t customer service for replacement parts.
• Estimated Assembly Ti me: 10 minutes
• Tools required for assembly: knife.
1. Remove assembled fountain from packaging and connect
pump to floating attachme nt as sembly by screw the nut on
floating attachment ass embly to the outlet of pump. Fig. 1
Fig. 1
2. Choose a fountain head for the desired water effect, and
assemble your choice as show n in Fig. 2
Fig. 2
3. Connect the light to the cord by pushing the plug into the light
socket until it is firmly seat ed. Hand tighten the nut from the plu g
to the socket. Fig. 3
Fig. 3
PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
Loading...