pomona 6703A User Manual

®

Model 6703A

Pomona

Features:

9 Connectors are precision machined (not die-cast) from brass.
9 Black nickel plating is applied for easily identification as a high definition connector.
9 Insulator material is high density PTFE to maintain a perfect dielectric constant.
9 Connectors utilize gold plated contact pin to maintain low return loss in high definition applications.
9 Connector is precision matched to Belden ® 1694A cable, a precision low loss serial digital video

RG-6/U coax cable.

9 video coax for analog and digital SDI/HDTV applications
9 Connectors use standard commercial die set, size: 0.324"/0.255"/0.068" HEX and 0.052"/0.042" SQ

(e.g. model 2657 or 2699 from Paladin Tools)

Materials:

Connector Body Black nickel plated brass
Crimp Ferrule Nickel plated annealed copper
Outer Contact Nickel plated brass
Male Contact Pin Gold plated brass
Insulator Polytetrafluorethylene (PTFE)

Ratings:

Impedance: 75 ohms
Frequency: 0 to 3 GHz.
VSWR: 1.3 max

Insertion Loss: 0.2 db (@ 3GHz.)
Leakage Loss: -55 db (@ 3GHz.)
Contact Resistance: 3 Milliohms
Voltage *500 V
Insulation Resistance: 5,000 Megohms
Insertions: 500 min.
Cable Retention: 60 lbs.
Temperature: -55 to +199° C

*Hands free testing in controlled voltage environment; For CE compliance: not intended for hand held use at voltages above 33Vms/70
Vdc

HDTV, 75 Ohm BNC
Connector for RG-6/U

All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm ).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA

Rev: 005
D1099634

Sales: 800-490-2361 Fax: [phone] Technical Assistance: [e-mail]

For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com

Page 1 of

Pomona

®

Model 6703A
HDTV, 75 Ohm BNC
Connector for RG-6/U

Use standard commercial die set, size: 0.324"/0.255"/0.068" HEX and 0.052"/0.042" SQ
(e.g. model 2657 or 2699 from Paladin Tools)

All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm ).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA

Rev: 005
D1099634

Sales: 800-490-2361 Fax: [phone] Technical Assistance: [e-mail]

For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com

Page 2 of