www.polytron.co.id
Multimedia player with FLASHRIP
Instruction ManualInstruction Manual
Thank you for choosing our product.
POLYTRON - Multimedia Player with FlashRip
Manufactured by : PT. Hartono Istana Teknologi
Read through these operating guide to optimize the performance of the system and become familiar with the
operating procedure.
1
TABLE OF CONTENTS
THE UNIT AND ACCESSORIES ................................................................................................... 1
FEATURES OF THE UNIT ........................................................................................................... 1
SAFETY INSTRUCTION ............................................................................................................. 2
INTRODUCTION OF THE COMPATIBLE DISC AND FILE FORMAT ....................................................... 3
PARTS OF THE UNIT ................................................................................................................ 3
INSTALLATION INSTRUCTION .................................................................................................... 5
OPERATING PREPARATION ...................................................................................................... 6
SOUND SETTING ..................................................................................................................... 6
DVD PLAYER OPERATING INSTRUCTION ..................................................................................... 7
DVD PLAYER SETUP INSTRUCTION ............................................................................................ 13
TAPE OPERATING INSTRUCTION ................................................................................................ 16
RADIO OPERATING INSTRUCTION .............................................................................................. 16
KARAOKE OPERATING INSTRUCTION ......................................................................................... 16
MAINTENANCE INSTRUCTION .................................................................................................... 17
TROUBLESHOOTING ................................................................................................................ 18
LANGAUGE CODE ................................................................................................................... 19
SPECIFICATIONS ..................................................................................................................... 20
SPECIFICATIONS
Unit section
Power Source : AC 220 V , 50/60 Hz
DC 8 x 1,5 V UM-1 Battery
Power Consumption : 54,5 Watt maximum
Frequency Response : 20 - 20.000 Hz
Audio Output : 2 x 10 Watt rms
Dimension, ( L x W x H ) : 590 x 322 x 221 mm
Weight : 7,5 kg (without batteries)
CD section
System : Digital
Laser : Semiconductor Laser
Signal to Noise ratio : 60 dB
Dynamic Range : 60 dB
Tape section
Casette Mechanism : single
Tape Speed : 4,76 cm/sec
Tape Speed Variation : 0,4 %
Channel Separation : 35 dB
Signal to Noise ratio : 45 dB
Radio section FM AM
Frequency Range : 88 - 108 MHz 520 - 1650 kHz
Receiving Sensitivity : 15 V 1,3 mV/m
Image Rejection : 20 dB 30 dB
IF Rejection : 40 dB 35 dB
-3dB Limiting Sensitivity : 3,5 V Stereo Indicator Sensitivity : 10 V Stereo Separation : 26 dB -
VIDEO Output section
Composite Video Out (CVBS) : 1 Vp-p (75 Ohm)
Component DVD Out : “Y” = 1 Vp-p (75 Ohm), “Pb / Pr” = 0,5 Vp-p (75 Ohm)
LINE Input section
Mic Sensitivity : 10 mVrms (8 KOhm)
AUDIO Output section
CD (0 dB, 1 kHz) : 1 Vrms
Tape (0 dB, 1 kHz) : 700 mVrms
Tuner/Radio (99,9 kHz deviation) : 700 mVrms
Multimedia device section
Port USB : USB 1.1 (standard)
SD/MMC/MS Card Slot : 3 in 1 card connector 26 mm
WE RESERVE RIGHT TO CHANGE THE TECHNICAL SPECIFICATIONS WITHOUT PRIOR NOTICE
P.TEJ3.02
20
THE UNIT AND ACCESSORIES
take out the unit from the package and make sure you got the stated items : a Main unit, Remote Control and
batteries, RCA Audio Video cable, AC Cord, Instruction Manual and Warranty Card (optional).
FEATURES OF THE UNIT
1. DVD/SVCD/VCD(real 2.0)/CD/MP3/MPEG4/MPG Player and JPEG Imager
2. DVD Function : Menu, Title, Program, Next/Previous, Fast Forward/Reverse, Slow, Step, Repeat 1/All,
Repeat A-B, OSD, Go To, Audio, Subtitle, Camera Angle, Zoom, PAL/NTSC.
3. FLASHRIP function (CD Audio ripping) 11. ECHO function
4. 5 PRESET EQUALIZER (Rock/Classic/Jazz/Pop/Flat) 12. MIC terminal
5. SURROUND 13. AUDIO OUT terminal
6. BAZZOKE (add the Bass stability) 14. VIDEO OUT (composite) terminal
7. KARAOKE (AVC and MPX) 15. YPbPr OUT (component) terminal
8. Full Auto Stop Tape Deck Mechanism 16. COAXIAL DIGITAL OUT terminal
9. Recording from another source to the cassette 17. USB terminal
10. Battery power source indicator on the LCD screen 18. SD/MMC/MS Card terminal
2 19
LANGUAGE CODE
Use the following codes to select preferred language for AUDIO/SUBTITLE/DISC MENU on the OTHERS option.
LANGUAGE CODE
Abkhazia 6566
Afar 6565
Afrika 6570
Albania 8381
Amharik 6577
Arab 6582
Armenia 7289
Assam 6583
Aymara 6588
Azerbaijan 6590
Bashkir 6665
Bask 6985
Belanda 7876
Belorusia 6669
Bengali-Bangla 6678
Bhutan 6890
Bihar 6672
Breton 6682
Bulgaria 6671
Burma 7789
Ceko 6783
China 9072
Denmark 6865
Esperanto 6979
Estonia 6984
Faroe 7079
Fiji 7074
Finlandia 7073
Frisia 7089
Galisia 7176
Georgia 7565
Greenlandia 7576
LANGUAGE CODE
Guarani 7178
Gujarati 7185
Hausa 7265
Hindi 7273
Hungaria 7285
Indonesia 7378
Inggris 6978
Interlingua 7365
Irlandia 7165
Islandia 7383
Italia 7384
Jawa 7487
Jepang 7465
Jerman 6869
Kambodia 7577
Kanada 7578
Kashmir 7583
Katalan 6765
Kazakh 7575
Kirghiz 7589
Korea 7579
Korsika 6779
Kroasia 7282
Kurdi 7585
Laos 7679
Latin 7665
Latvia, Lettish 7686
Lingala 7678
Lithuania 7684
Macedonia 7775
Malagasi 7771
Malayalam 7776
LANGUAGE CODE
Malta 7784
Maori 7773
Marati 7782
Melayu 7783
Moldavia 7779
Mongolia 7778
Nauru 7865
Nepal 7869
Norwegia 7879
Oriya 7982
Panjabi 8065
Pashto, Pushto 8083
Perancis 7082
Persia 7065
Polandia 8076
Portugis 8084
Quechua 8185
Rhaeto
-Romance 8277
Rumania 8279
Rusia 8285
Samoa 8377
Sansekerta 8365
Seltik
-Skotlandia 7168
Serbia 8382
Serbo-Kroasia 8372
Shona 8378
Sindhi 8368
Singhala
(Seilon) 8373
Slovakia 8375
LANGUAGE CODE
Slovenia 8376
Somalia 8379
Spanyol 6983
Sudan 8385
Swahili 8387
Swedia 8386
Tagalog 8476
Tajik 8471
Tamil 8465
Tatar 8484
Telugu 8469
Thailand 8472
Tibet 6679
Tigrinya 8473
Tonga 8479
Turki 8482
Turkmen 8475
Twi 8487
Ukarainia 8575
Urdu 8582
Uzbek 8590
Vietnam 8673
Volapuk 8679
Welsh 6789
Wolof 8779
Xhosa 8872
Yiddi 7473
Yoruba 8979
Yunani 6976
Zulu 9085
15 cm
15 cm
15 cm
15 cm
SAFETY INSTRUCTION
Before operating the unit please follow these advise and instruction below for safe and correct operation.
Place the unit on a safe, stable and flate surface.
Do not obstruct the unit ventilation openings with paper, tablecloth, curtain,
etc. Place the unit approximately 15 cm away from other object.
Do not place the unit on any exteremely hot (near a heater or fire place), cold, humid or dusty
areas. Do not expose the unit under the direct sunlight. Place the unit at temperature from
50C until 350C.
Do not place any objects filled with liquid on or arroud the unit and keep it
away from splasing or dripping water.
Do not place any fire sources on or arround the unit, such as burning candle, match, etc.
Contact our service station when the unit does not work properly or
damaged. Do not try to repair by yourself.
Grip the AC Cord plug and do not pull the wire when you are connecting or
disconnecting the AC Cord. Unplug the AC Cord plug from kthe AC power
outlets if the unit is not operated for a long period of time.
Condensation
Condensation might occur on the following condition : the unit is moved from a cold place to the warmer one,
the unit is operated inside a steamed room or a room with a high humidity, the unit is operated near an Air
Conditioner, soon after a room heater is turned ON. If there is a condensation inside the unit, it probably enable
to operate temporarily. In this case, wait about 1 until 2 hours to evaporate the moisture.
Safety Marking
CAUTION : To reduce the risk of electric shock, do not remove cover. No user-serviceable parts
inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instruction in the literature accompanying
the appliance.
The unit uses a component that produces laser beam and it have been classified as CLASS 1.
This marking is placed on the exterior of the bottom of the unit.
ENVIRONMENT INFORMATION : Please take attention to the local regulation for packaging,
battery and ex-unit disposal. The dispose of battery should be separated from common trash
as chemical disposal.
Problem
USB Flashdisk or SD/MMC/
MS Card undetected.
Causes
- Error or busy system.
- USB Flashdisk or SD/MMC/MS Card
does not connected or plug properly
to the USB terminal or Card Slot.
Solution
- RESET the unit.
- Unplug USB Flashdisk or SD/MMC/
MS Card, then turn off the unit,
turn the unit on and plug USB
Flashdisk or SD/MMC/MS Card
correctly.
18 3
INTRODUCTION OF THE COMPATIBLE DISC AND FILE FORMAT
This unit is designed to be able to play DVD, SVCD, VCD Ver 1.0 - 2.0, CDDA, MP3, MPEG4, MPG and also
can be used to displaying picture in JPEG format.
Note : On the development forward, there will be MPEG4 disc with many extension file kind appears. There is
possibility this player can not support some MPEG4 disc with certain extension file. Not all JPEG files
compatible with this unit.
Kind Symbol Content Size Max. Duration
Digital Versatile Disc
Super Video Compact Disc
Video Compact Disc (Audio + Video)
Compact Disc Digital Audio (Audio)
Compressed Audio with MPEG Audio Layer 3
format
Audio + Video (Compressed Video MPEG4
format)
Compressed picture / photo with JPEG format
DVD
SVCD
VCD
CD Audio
MP3
MPEG4
JPEG
12 cm / 8 cm
12 cm
12 cm / 8 cm
12 cm / 8 cm
12 cm / 8 cm
12 cm / 8 cm
240 / 180 min.
45 min.
74 / 20 min.
74 / 20 min.
910 / 246 min.
910 / 246 min.
Top Panel
PARTS OF THE UNIT
Front Panel
Description of the Front Panel :
1. Cassette Compartment 8. (play/pause) button
2. RPT (repeat) button 9. PBC (play back control) button
3. (previous) 10. Remote Control Sensor
4. Standby indicator 11. (next) button
5. MULTIMEDIA button 12. EQ (equalizer) button
6. / (stop/enter) button 13. Speaker
7. LCD screen (liquid crystal display)
Keterangan Panel Atas :
1. FM STEREO indicator
2. FM MODE button
3. FUNCTION switch
4. TUNING control
5. Radio Wave Scale
6. USB terminal
7. OPEN marking
8. Disc compartment
9. TAPE operational button
10. SD/MMC/MS terminal
11. SURROUND indicator
12. SURROUND button
13. BAZZOKE button 14. BAZZOKE indicator 15. VOLUME control 16. MIC terminal
TROUBLESHOOTING
If the unit can not perform normally, follow the instruction below. If can not be finished or the failure there is
no on the Problem column, unplug the AC Cord and contact our after sales service near of your place.
9
2 456
3 7
8
1
10 12
11 13
14
13
12
11
16
15
10
871234596
Problem
There is no power indication
or no sound.
Output sound is not stereo.
Emitted sound is low.
Disc can not be played.
There is no picture on the
TV screen.
Picture distortion.
The tape does not run.
Unbalanced tape sound.
Bad recording result.
Tape can not be used for
recording.
High frequency of tape is
less.
Bad radio reception or
reception contains noise.
Remote control is does not
work.
MIC does not work.
Causes
- AC Cord plug does not connected
properly to the power source.
- There is active karaoke function.
- Installation cable to other equipment
is not connected properly.
- Volume is in minimum condition.
- Disc is not compatible with the player.
- Disc is placed inversed.
- Disc is not put correctly.
- Disc is dirty.
- Disc is damaged or many scratch.
- Parental Lock function is active.
- AV Input setting is not appropriate
with used TV input terminal.
- Video cable is not firmly connected.
- Disc is dirty.
- Disc damaged or many scratch.
- Bad quality of video cable.
- DVD setup menu is incorrect.
- Tape is in pause condition.
- Check the power source, may be the
AC Cord plug is unplug.
- Head is dirty.
- Record head is dirty.
- Erasure prevention tab on the
cassette has been broken.
- Head is dirty.
- The antenna direction is not correct.
- There is interference from other the
near electric appliances.
- Battery polarity is incorrect or
inversed.
- Remote control is not directed to the
unit sensor on the front panel.
- Battery is exhaust.
- Microphone switch is in OFF position.
- If you use Wireless MIC, may be the
battery has exhaust.
- Maybe Microphone has damaged.
Solution
- Connect the AC Cord plug properly
to the power source.
- Matikan fungsi karaoke.
- Connect the installation cable
properly.
- Increase the Volume level.
- Use the disc/file format according
to the manual instruction.
- Insert the disc with label upside.
- Put the disc correctly.
- Clean up the disc.
- Use the undamaged disc.
- Deactivate the Parental Lock.
- Change the AV Input setting of
the TV.
- Connect the video cable properly.
- Clean up the disc.
- Use the undamaged disc.
- Use the video cable with a good
quality.
- Set the DVD setup menu according
to the manual instruction.
- Press “ ” (pause) button.
- Plug the AC Cord plug to the power
source.
- Clean up the head.
- Clean up the record head.
- Close the erasure prevention tab
with adhesive ribbon.
- Clean up the head.
- Change the direction of the
antenna to get the best reception.
- Move away the unit from other
electric appliances.
- Insert the battery with the right
polarity.
- Point the remote control to the
unit sensor on the front panel.
- Change the battery with the new
ones.
- Switch ON the Microphone switch.
- Replace the battery with the new
one.
- Try other Microphone.
4 17
Rear Part
Description of the Rear Part :
1. Battery compartment
2. VIDEO OUT (composite) terminal
3. AUDIO OUT (stereo LR) terminal
4. COAXIAL Digital OUT terminal
5. Handle
6. FM Telescopic antenna
7. AM Loop antenna terminal
8. DVD OUT (component) terminal
9. AC IN terminal
LCD screen (liquid crystal display)
Description of the LCD screen :
1. REPEAT 10. DTS
2. MP3 11. RANDOM
3. DVD 12. Unit status/function
4. EQUALIZER 13. PROGRAM
5. VCD 14. LR
6. CDDA 15. STEREO
7. DOLBY DIGITAL 16. PBC
8. JPEG 17. PLAY/PAUSE
9. Battery 18. MIC
Remote Control battery installation : Open the battery cover and insert two
batteries size “AAA/UM4/R-03” or equivalent with the right polarity, as shown
on the battery place.
Remote Control
Button Description of the Remote Control :
1. “MUTE” 18. “PROG/MEM” (program/memory)
2. “I/ ” (unsupported) 19. “REPEAT”
3. “ANGLE” 20. “A-B”
4. “AUDIO” 21. “ ”/“ ”
5. “KARAOKE” (fast reverse/fast forward)
6. “EQ” (equalizer) 22. “ / STEP” (pause/step)
7. “SURR” (surround) 23. “ ” (stop)
8. “BAZZ” (bazzoke) 24. “RETURN”
9. “SETUP” 25. “ / / / ” (navigasi)
10. “ / ” (play/enter) 26. “PBC/MENU”
11. “- VOL +” (volume) 27. “GO TO”
12. “ ”/“ ” (previous/next) 28. “ZOOM/FLASHRIP”
13. “OSD” (on screen display) 29. “0”-“9” numeric
14. “ECHO” 30. “TITLE”
15. “CLEAR/FM MODE” 31. “SUB-T” (subtitle)
16. “SLOW/AM/FM” 32. “FUNCT” (function)
17. “SLEEP” (unsupported) 33. “MULTIMEDIA”
9102345678111121314151624232018191722
21
26
25
27
28
29
30
31
32
33
567
8
4321
914131211
15161718
10
5
678
4321
9
Channel Selection : While playing SVCD/VCD/CD/MP3 disc, press “KARAOKE” button to select audio output
without vocal (only music).
- When Microphone connected to the unit and you press “KARAOKE” button, available channel selection :
MPX LEFT, MPX RIGHT and AVC RIGHT.
- When Microphone does not connected to the unit and you press “KARAOKE” button, available channel
selection : MONO LEFT, MONO RIGHT, MIX-MONO and STEREO.
Note : For VCD karaoke disc with vocal format on the right channel, AVC (Automatic Vocal Changer) function
would works. For DVD karaoke disc, you can select audio output without vocal (only music) by pressing
“AUDIO” button.
Echo
While singing a song (karaoke), you can add echo effect by pressing “ECHO” button on the remote control.
MAINTENANCE INSTRUCTION
Cleaning the unit
Use a soft and dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with mild
detergent solution. Do not use strong solvents, such as alcohol, benzine or thinner.
Cleaning the Head
Every ± 24 hours usage, clean the head and tape path using a head cleaning cassette or cotton moistened
with cleaning fluid. Parts that need for clean up are : playback/record head, erasure head, capstan and pinch
rollers. After cleaning the parts, wait until the cleaned parts are completely dry.
Disc Maintenance
- Do not place the unit in oblique position when there is CD in the unit. Do not place and play
the player with two disc in a CD tray.
- After playing a disc, store the disc in its case. Do not leave the disc in the unit because it
can make disc become expand and humid.
- After playing a disc, store the disc in clean case and do not leave the disc in places that are
hot or humid.
- When a disc become dirty, wipe the disc from center out with a cleaning cloth.
- Do not wipe the CD by turning around, it can cause damage your CD. And do not clean the
CD with chemical liquid.
Cassette Maintenance
- After playing the cassette, keep it on its case. Do not leave the cassette inside the unit, this
will cause cassette tape is expanding or kinked hot consequence or cassette tape become
humid.
- Do not place the cassette near the magnetic source, can degrade the
quality of the cassette.
- Do not place the cassette to any direct sunlight source.
Recording safety tab :
- To protect your important recorded cassette from possibility erasure because
involuntary. Break off the taps on the cassette ribbon after recording with a
screwdriver or other pointed tool.
- If the cassette will be used to record again, cover the tape with adhesive ribbon.
W
e
l
c
o
m
e
t
o
T
h
e
V
i
d
e
o
s
16 5
INSTALLATION INSTRUCTION
Connect the Video out and Line out first as well the other equipment first before connecting the unit to the
power source.
AM Loop antenna
Connect the AM Loop antenna to get the better AM reception. Put the stander of the AM Loop antenna before
use it. Placed the AM Loop antenna far away from the unit to get the better signal reception.
MIC (microphone) terminal
By plugging the Microphone to this terminal, you can use the unit as Microphone Amplifier or Karaoke.
VIDEO OUT (composite) and AUDIO OUT terminal
You can enjoy the picture of the unit DVD player through the TV. Connect the VIDEO OUT and AUDIO OUT of the
unit to the AV IN terminal of the TV using RCA Video Audio cable. If the unit connected to the TV by VIDEO OUT
and AUDIO OUT terminal, then you should select the AV Video as TV input.
DVD OUT (component) terminal
To get the better picture that Video Composite, the unit has DVD COMPONENT OUT terminal. Connect the Y,
Pb, Pr output (DVD component output) terminal to the YPbPr input of the TV that has this facility.
COAXIAL Digital OUT (coaxial) terminal
This unit equipped with COAXIAL Digital output, so if you has AV RECEIVER that equipped with COAXIAL Digital
input, you can connect COAXIAL Digital output terminal of the unit to your AV RECEIVER to add the perfectness
of the 5.1 channel sound system from DVD player of the unit.
RADIO OPERATING INSTRUCTION
Slide the FUNCTION button to the FM or AM position. Turn the TUNING knob
to select preferred radio station. Adjust VOLUME, BAZZOKE, SURROUND
and PRESET EQUALIZER as your desired.
Note : Adjust the antenna length and direction to get the best FM reception,
set and adjust the AM Loop antenna direction to get the best AM reception.
USB terminal
You can play MP3/MPEG4/JPEG/
certain files that is stored on the USB
Flashdisk by plug in the USB Flashdisk
to the USB terminal on the front panel.
If you want to play MP3/MPEG4/JPEG/
files inside the MP3/MP4 player, make
sure its has USB port or USB Data cable
to plug in it to the unit.
AV RECEIVER
LCD
/ MONITOR
DVD Component
Input (YPbPr)
DVD Component Out
REAR PART OF THE UNIT
TV
AV Input
Video Ou
t
Audio Out
Coaxial Out
Coaxial Input
USB
FLASHDISK
Kabel data USB to MINI USB
MP3/MP4 PLAYER
TOP PART OF THE UNIT
KARAOKE OPERATING INSTRUCTION
Plug in the Microphone to the MIC terminal and LCD will displaying indicator. Slide the FUNCTION switch to
select function (TAPE / DVD). Press “ ” (play) button for karaoke with cassette or “ / ” button for karaoke
with CD/VCD/DVD disc. Adjust VOLUME, BAZZOKE, SURROUND and Preset Equalizer as your desire. Turn On
the Microphone. Select the desired karaoke mode according to the selected function (TAPE / DVD).
If you are using a cassette for karaoke, AVC (Automatic Vocal Changer) will active, original voice singer will
be lose if you are singing in front of Microphone. If you are using a disc for karaoke, there are 2 karaoke mode
available : AVC Right and MPX.
Recording
1. Insert a blank cassette to the cassette comaprtment and close the cassette
compartment.
2. Press “ ” (pause) button, then press “ ” (record) button.
3. Slide the FUNCTION button to select the record source.
- FM / AM : Record a radio broadcast.
- TAPE : Record a sound from Microphone.
- DVD : Record a sound from DVD/VCD/CD/MP3/MP4 disc playback.
- USB : Record a sound from DAT/MP3/MPEG4 file playback from USB Flashdisk.
- SD/MMC/MS : Record a sound from DAT/MP3/MPEG4 file playback from SD/MMC/
MS card.
4. Press “ ” (pause) button to start recording.
5. Press “ ” (stop/eject) button if recording is finished or stop recording.
F FWDSTOP/EJECTPAUSE RWD PLAY REC
F FWDSTOP/EJECTPAUSE RWD PLAY REC
F FWDSTOP/EJECTPAUSE RWD PLAY REC
SD/MMC/MS card terminal
You can play MP3/MPEG4/JPEG/certain files that is stored on the SD/MMC/MS card,
just plug in the SD/MMC/MS card to the SD/MMC/MS card slot on the top part of the
unit.
TOP PART
OF THE
UNIT
TAPE OPERATING INSTRUCTION
Cassette Playback
1. Slide the FUNCTION switch to the TAPE position, TAPE will be displayed on the LCD.
2. Open the cassette compartment by pressing “ ” (stop/
eject) button.
3. Insert the cassette to the cassette compartment. Close the cassette compartment.
4. Press “ ” (play) button to play the cassette.
5. Adjust Volume, Bazzoke, Surround and Preset Equalizer as
your desired.
Other operational button :
- Press “ ” (fast forward) button to furl the tape forward.
- Press “ ” (fast rewind) button to furl the tape reverse.
- Press “ ” (pause) button to pause the tape for a moment.
- Press “ ” (stop/eject) button to stop the tape and open the cassete compartment.
- The tape will stop automatically if teh cassette is reached to the end of the tape (Full Auto Stop).
F FWDSTOP/EJECTPAUSE RWD PLAY REC
F FWDSTOP/EJECTPAUSE RWD PLAY REC
6 15
OPERATING PREPARATION
Tunr On the unit
AC Power Source : Open the battery cover, there will be AC Cord plug stored on the battery compartment.
Connect the AC Cord contact part to the AC IN terminal on the rear part of the unit. Connect the AC Cord plug
to the AC power outlets according to the voltage specification of the unit and the unit is ready to operate.
Battery : Unplug the AC Cord plug from AC IN terminal and keep it
in a safe place. Put 8 batteries with “UM1” size or equivalent to the
battery compartment. Take attention to the battery polarity, do not
be inversed. Close the battery cover and the unit is ready to
operate.
Standby mode
To make the unit into the standby mode, slide the FUNCTION switch to the ST.BY/TAPE position and do not
operate the TAPE (TAPE is in OFF condition). On the LCD screen will be displayed OFF TAPE for a moment, then
standby indicator on the front panel lights up. This condition only happen if the unit is operated by AC power
source, if using the battery as power source and FUNCTION switch on the ST.BY/TAPE, the unit will be in off
condition. After OFF TAPE displayed on the LCD screen, Volume, Equalizer, Surround and Bazzoke settings will
back to the default setting. When the unit is in standby condition there is only a few electric current flows to
the unit.
Turning Off the unit
When the unit is operated by AC power outlets, unplug the AC Cord plug from AC power outlets to turn off the
unit permanently. If using the batteries as power source, slide the FUNCTION switch to the ST.BY/TAPE and
do not operate the TAPE (TAPE is in OFF condition). Place the AC Cord plug so it is easy to reached and plug/
unplug.
Note : When operate dthe unit using the AC power source, battery connection with the unit will automatically
cut off. If the unit is not being used for a long period of time, unplug the AC Cord plug from the power source.
SOUND SETTING
Volume
Turn the VOLUME control on the unit or on the remote to set the volume level.
Bazzoke
BAZZOKE has functioned to add the bass stability earned by the unit. Press “BAZZOKE” button on the unit or
“BAZZ” on the remote to activate BAZZOKE, press it again to deactivate the BAZZOKE.
Surround
This unit also equipped with surround facility to expanded the stereo effect. Press “SURROUND” button on the
unit or “SURR” button on the remote to activate surround. Press “SURROUND” / “SURR” button again to
deactivate surround.
Preset Equalizer
This unit has equipped with 5 preset equalizer, there are : JAZZ, CLASSIC, POP, ROCK and FLAT. Press “EQ”
button on the remote or on the front panel to select the one of the desired preset equalizer mode. Preset
equalizer indicator will lights according to the selected preset equalizer.
Mute
Press “MUTE” button on the remote to muting the sound, MUTE will be displayed for a moment on the TV
screen and LCD screen of the unit. To back to normal, press “MUTE” button again or “VOL+” button.
Preference
PREFERENCE menu consist of : TV SYSTEM, AUDIO, SUBTITLE, DISC MENU, PARENTAL, PASSWORD and
DEFAULT. TV SYSTEM, AUDIO, SUBTITLE, DISC MENU and PARENTAL menu only can be adjusted when the
unit is in STOP, OPEN or NO DISC condition.
TV System
You can adjust TV SYSTEM to PAL, AUTO or NTSC. Match it with your TV.
Audio
Used to select the language as audio output language. There are : ENGLISH,
FRENCH, SPANISH, CHINESE, JAPANESE, KOREAN, RUSSIAN, THAI and
OTHERS. If you select unavailable language on the disc, the unit will
automatically select the one of available language for audio language, this
caused not all DVD disc recorded in language mentioned above.
Subtitle
Used to select language as subtitle text on the screen. Available language option : ENGLISH, FRENCH,
SPANISH, CHINESE, JAPANESE, KOREAN, THAI, INDONESIAN, MALAY, OTHERS and OFF. If you select OFF,
the unit will not displayed subtitle on the TV screen.
Disc Menu
Used to select language as disc menu or instruction on the TV screen. Available language option : ENGLISH,
FRENCH, SPANISH, CHINESE, JAPANESE, KOREAN, RUSSIAN, THAI and OTHERS. If you select unavailable
language on the disc, the unit will automatically select the one of available language for disc menu, this caused
not all DVD disc recorded in language mentioned above.
Parental
Enable you to set the limit of parental protection movie according to the age level. PARENTAL can only be
changed by entering a correct PASSWORD. Select ADULT if you want to deactivate PARENTAL function.
PARENTAL function only works if DVD disc support this facility.
Password
Select CHANGE to replace the old Password with new Password (5 digit password). If the inserted Password
is wrong because of forget or replace by someone else, you can use “13579” SUPER PASSWORD. Then insert
the new PASSWORD (5 digit password).
Default
Select RESET to return all setting to the FACTORY DEFAULT.
Video
Video setup menu consist of : TV MODE, SHARPNESS, BRIGHTNESS and CONTRAST.
TV Mode
If used TV has 2x Horizontal Scanning System, you can select P-SCAN to
get more smooth picture.
Sharpness
To set the pictures sharpness level. Generally, excessive sharpness adding
will reduce the picture detail. There are 3 Sharpness option setting : HIGH,
MEDIUM and LOW.
Brightness
To set the pictures brightness level. You can set brightness level from -20
until +20.
Contrast
To set the pictures contrast level (differences between black and white color). You can set contrast level from
-16 until +16.
14 7
Audio
AUDIO setup menu consist of : DOWNMIX, SPDIF OUTPUT and DRC.
Downmix
1. LT/RT : When the disc is played with DOLBY DIIGITAL PRO LOGIC
stereo effect, signal decoder will produces 2 channel L (left) and R
(right) simulation effect.
2. STEREO : When playing 5.1 channel disc, the output signal will become
stereo signal 2 channel L (left) and R (right).
SPDIF Output
1. SPDIF/OFF : Turn off the Digital Audio output.
2. SPDIF/RAW : Select this option if the player connected to Digital
Amplifier with digital input (COAXIAL / OPTICAL). When playing a disc that recorded with DOLBY DIGITAL
/ DTS audio format, digital signal will comes out without modulation process.
3. SPDIF/PCM : Select this if the player connected to 2 channel Digital Amplifier. When playing a disc that
recorded with DOLBY DIGITAL audio format, digital signal will be modulated to the 2 channel PCM signal
through Digital Audio output.
Note : Audio DTS format only can comes out through Audio Digital if you set SPDIF Output to SPDIF/RAW.
DRC
Used to set the different between the highest and lowest level on the audio output. Press “ / ” button to
enter to DRC option and press “ / ” navigator to select the option, then press “ / ” button to activate.
DVD PLAYER OPERATING INSTRUCTION
Playing DVD/SVCD/VCD/CD disc
1. Slide the FUNCTION on the top panel to the DVD function. Press OPEN marking to open the disc
compartment. Insert the desired disc to be played. Close the disc compartment and disc will be played
automatically.
- For DVD disc after the unit loading the disc, will be displayed disc menu on the TV screen and DVD
symbol on the LCD screen will lights up.
- For VCD 2.0 disc after the unit loading the disc, will be displayed disc menu on the TV screen and VCD
& PBC symbol on the LCD screen will lights up.
- For VCD 1.1 and CDDA disc after the unit loading the disc, automatically go to the track and play.
2. To freeze the picture for a moment (pause), while playing press “ /STEP” on the remote or “ ” on the
front panel once. To back to play condition, press “ / ” button on the remote or “ ” button on the
front panel.
3. To stop play, press “ ” (stop) button once, the unit will remember the last play position when “ ” (stop)
button is pressed (Resume). On the screen will be displayed “ ” (stop) symbol and “PRESS PLAY KEY
TO CONTINUE” appearance, press “ / ” button on the remote or “ ” button on the front panel of the
unit to play from the point when “ ” (stop) button is pressed. To truly stop the play permanently, press
“ ” (stop) button twice to deactivate resume function.
Playing MP3/MPEG4/JPEG disc
MP4 is a compression system of the digital video data with MPEG4 international standard and use MP3/AC3
or others audio format. MPEG4 itself is a compression system of digital video data that produced almost equal
MPEG2 (DVD) picture quality with smaller size. As sample, used extension is “*.avi”.
MP3 is a compression system of digital audio data with MPEG audio layer 3 format that produces data savings
12 - 14 times more than conventional system with equalize CDDA quality that be able to save more than 600
minutes play time. While JPEG disc is a disc that contains many pictures in JPEG format (Joint Photographic
Expert Group).
Operation mode of the MP3/MP4/JPEG disc
While playing MP3/MP4/JPEG disc, there are 3 operation mode : FILELIST, FOLDER and PLAYLIST. To change
the mode in stop condition, press “PROG/MEM” button repeatedly. If one disc contains MP3 and JPEG files,
you can displaying the JPEG file by pressing “PROG/MEM” button.
1. Filelist Mode : Used to play all the files continuously from beginning to
the end, not per folder for the MP3/MP4/JPEG disc. Press “ / ”
navigator button to select track, then press “ / ” button to play it.
Track also can be selected using “0-9” numeric buttons, press numeric
buttons according to the track number or sequence.
2. Folder Mode : In the folder mode, browser menu will displayed the content (files/folders) of the disc.
- To select the desired directory, press “ / ” navigator button to
highlight, then press “ / ” button to select/confirm. Or pressing
“0-9” numeric buttons to select the folder directly.
Example : To select “R & B Inside” press “1” button, then press “ /
” button.
- After the folder has selected, the content of the folder will be displayed.
General
GENERAL setup menu consist of : TV DISPLAY, ANGLE MARK, CAPTIONS and SCREEN SAVER.
TV Display
1. Pan Scan : Select this if the player connected to normal ratio TV
screen (4:3), picture will fulfill the screen but will sliced on the right
and left of the picture.
2. Letter Box : Select this if the player connected to normal ratio TV
screen (4:3), you will watch the picture’s source aspect ratio with
black border on the top and bottom.
3. Wide : Select this if the player connected to wide screen (16:9).
Notes :
- Picture’s aspect ratio is depends to the disc recording format, not all DVD disc can display the picture on
the selected aspect ratio.
- You should select TV Display setting according with the TV type.
Angle Mark
Only can perform if the DVD disc recorded in many camera angle.
1. ON : When playing DVD disc, OSD will display the angle mark on the right top corner of the TV screen.
2. OFF : The angle mark not be displayed.
Captions
1. ON : To displaying text on the TV screen.
2. OFF : Captions not displayed on the TV screen.
Screen Saver
When the player without activity or does not received signal for 4 minutes, Screen Saver will appear. This
facility is used to prevent the damage of the display screen.
1. ON : To activate the Screen Saver option.
2. OFF : Screen Saver is not active.
8 13
DVD PLAYERSETUP INSTRUCTION
SETUP is used to set up the player configuration. Consist of : GENERAL, AUDIO, VIDEO and PREFERENCE.
1. Press “SETUP” button to enter to SETUP main menu.
2. Press “ / ” navigator button to select the one of SETUP menu that
will be set (GENERAL / AUDIO / VIDEO / PREFERENCE).
3. Press “ / ” button on the remote control to enter to the selected
setup menu (GENERAL / AUDIO / VIDEO / PREFERENCE) and press “ /
” navigator button to select the one of submenu (TV Display / Angle
Mark / Captions / Screen Saver).
4. Press “ / ” button on the remote control to enter to the selected
submenu and press “ / ” navigator button to select (Pan Scan /
Letter Box / Wide), then press “ / ” button on the remote control.
5. Press “SETUP” button again to exit from SETUP menu.
Camera Angle (viewing angle option)
Many DVD disc provides camera angle facility to enable you watch the scene in different viewing angle. If
ANGLE MARK (refer General setup menu) is set to ON, camera symbol will be displayed on the TV screen to
indicates that camera angle option are available (if DVD disc has more than 1 camera angle). As example : If
there are 3 extra camera angle, press “ANGLE” button to change
to another camera angle view, OSD camera angle will appear as
beside. Pressing “ANGLE” button afterward will move the camera angle view to the next angle.
Zoom (enlarge)
This function used to enlarge picture view while playing a disc. There
are 3 zoom level of enlarging picture, each time “ZOOM” button is
pressed, the pictures view will enlarged to 2x, 3x and 4x. During ZOOM
you can use “ / / / ” navigator button to find the preferred picture part. Press “ZOOM” button again to back
to normal.
Note : ZOOM only works when playing DVD/SVCD/VCD disc and ZOOM does not work when playing MP4 disc.
Go To / Search
When playing DVD/SVCD/VCD disc you can use this function to go to the certain title/chapter/track/time.
DVD disc
1. GO TO TITLE/CHAPTER : Press “GO TO” button once when play, use “ / ”
navigator button to select title/chapter, then insert preferred title/chapter
number.
2. GO TO TITLE TIME : Press “GO TO” button twice when play, insert preferred
title time (hour/minute/second) using “0-9” numeric buttons.
3. GO TO CHAPTER TIME : Press “GO TO” three times when play, insert
preferred chapter time (hour/minute/second) using “0-9” numeric buttons.
SVCD/VCD/CD disc
1. DISC GO TO : Press “GO TO” once when play, insert preferred disc time
(minute/second) using “0-9” numeric buttons.
2. TRACK GO TO : Press “GO TO” twice when play, insert preferred tracktime
(minute/second) using “0-9” numeric buttons.
3. SELECT TRACK : Press “GO TO” three times when play, insert preferred
track number using “0-9” numeric buttons.
- Press “ / ” navigator button to select track, press “ / ” button
to play. Track also can be selected directly using “0-9” numeric
buttons. Press numeric buttons according to the track number or
sequence.
Example : To select the 4th track “DISCO INFERNO - 50 CENT” press
“5” button once (as the sequence from the top), then press “ / ”
button. To select the 135th track, press “1”, “3” and “6” sequencely.
- Press “ ” navigator button to back to the previous folder.
3. Playlist Mode
Playlist only can be accessed if you had store some track/file. To store
track/file, go to the Folder or Filelist mode, press “ / ” navigator
button to select track then press “CLEAR” button to insert the track to
playlist. With this operation, you can play memorized tracks pereviously
on the MEMORY (the list of file on the playlist). To run on this operation,
press “PROG/MEM” button repeatedly until Playlist appear. To delete
track/file from the list, go to the Playlist mode, press “ / ” navigator
button to select track, then press “CLEAR” button once. To playing
track/file, go to the Playlist operation, press “ / ” navigator button to select track, then press “ / ”
button. To delete all track/file at once, when in stop condition press “ZOOM”.
Another function : Another function like VOLUME control, PAUSE, FAST FORWARD, FAST REVERSE, NEXT,
PREVIOUS and others, can be used during playing MPEG4/MP3/JPEG disc.
Added functions while playing JPEG disc :
While playing JPEG disc, “ / / / ” navigator or “ / ” button has function for :
* “ ” navigator button used to heels over head the picture (top-bottom).
* “ ” navigator button used to mirroring the picture (right-left).
* “ ” navigator button used to rotate the picture 900 counter clockwise.
* “ ” navigator button used to rotate the picture 900 clockwise.
* “ / ” button used to go to the next or previous picture.
* If you are pressing “ / / / ” navigator button while play, picture slide show will be stop.
* “ / ” button used to display the next picture sequencely.
* “ZOOM” button is used to enlarge the picture. Press “ ” (fast forward) button to ZOOM IN (enlarge) the
picture and press “ ” (fast reverse) button to ZOOM OUT (shrinking) the picture.
12 9
Using the FLASHRIP function
This features enable you to ripping the CDDA to be MP3 file stored to the USB Flashdisk through USB terminal.
1. Plug the USB Flashdisk to the USB terminal.
2. Insert the CDDA disc to be converted to the disc tray of the unit.
3. After the CDDA disc is reading by the unit, press “FLASHRIP” button on
the remote control. On the TV screen will appears FLASHRIP menu.
4. Set the SPEED and BITRATE using “ / ” button and use “ / ”
navigator button to select the desired SPEED and BITRATE.
5. Select the track to be converted using “ / / / ” navigator button and
“ / ” button, if you want to converted all available tracks, choose
SELECT ALL.
6. To start RIPPING process, press “ / / / ” button to select START
tab, then press “ / ” button. Wait the RIPPING process until it
finish.
7. After done, to get out from the RIPPING menu, select the EXIT tab then
press “ / ” button or by pressing “FLASHRIP” button once more.
Note :
The result of the conversion with MP3 format will be placed on the FLSHRIP
folder with POLY_XX.MP3 names format, XX is the sequence number of the
conversion. The maximum conversion files can be done on the FLSHRIP
folder are 99 files.
Repeat A-B
This function used to play a certain part of track/chapter/title you had determine before, between starting point
and certain end point by pressing “A-B” button. Press “A-B” button once to determine the starting point (A)
that will be repeated. displayed on the TV screen. Press “A-B” button again to determine the end point
(B) that will be repeated. displayed on the TV screen. The selected part will be repeated continuously. To
cancel REPEAT A-B repetition, press “A-B” button again .
Audio language
Many DVD disc has soundtrack that recorded in many language. “AUDIO” button
is used to select the different audio language. This button can be used to select
SURROUND sound format that is recorded on the disc (example : DOLBY DIGITAL,
STEREO and DTS). To change the language while playing DVD disc, press
“AUDIO” button until displayed Audio language info on the TV screen.
Subtitle (on the screen text)
Many DVD disc recorded with multi-subtitle. “SUB-T” button is used to select
your preferred subtitle. When playing DVD disc, press “SUB-T” button until
appear preferred subtitle language. To deactivate subtitle, press “SUB-T” button repeatedly until displayed
SUBTITLE OFF on the TV screen.
Note : Note all DVD disc recorded in multi-language subtitle.
OSD (On Screen Display)
OSD will display information about elapsed time (ELAPSED) and remain time (REMAIN) through TV screen.
DVD disc
1. Press “OSD” button once to display the elapsed time of played title (TITLE ELAPSED).
2. Press “OSD” button twice to display the remain time of played title (TITLE REMAIN).
3. Press “OSD” button three times to display the elapsed time of played chapter
(CHAPTER ELAPSED).
4. Press “OSD” button four times to display the remain time of played chapter (CHAPTER
REMAIN).
5. Pressing “OSD” button for the fifth times will turn off the OSD (DISPLAY OFF).
SVCD/VCD/CD disc
1. Press “OSD” button once to display the elapsed time of played track (SINGLE
ELAPSED).
2. Press “OSD” button twice to display the remain time of played track (SINGLE REMAIN).
3. Press “OSD” button three times to display the elapsed time of played disc (TOTAL
ELAPSED).
4. Press “OSD” button four times to display the remain time of played disc (TOTAL
REMAIN).
5. Pressing “OSD” button for the fifth times will turn off the OSD (DISPLAY OFF).
Note :
1. For MP4 disc and SVCD/VCD disc with PBC is ON (active), on screen display will only displayed SINGLE
ELAPSED and SINGLE REMAIN.
2. For SVCD/VCD disc with PBC OFF (unactive), on screen display will only displayed SINGLE ELAPSED,
SINGLE REMAIN, TOTAL ELAPSED and TOTAL REMAIN.
Playing MP3/MPEG4/JPEG files from USB Flashdisk or SD/MMC/MS card
You can playing MP3/MPEG4/JPEG/certain files that stored previously on the USB Flashdisk or SD/MMC/MS
card through this unit. Plug the storage media that used for stored MP3/MPEG4/JPEG to the according
terminal.
1. USB Flashdisk :
a. Plug the USB Flashdisk that contains MP3/MPEG4/JPEG files to the USB Flashdisk. For MP3/MP4
player with mini USB connector, connect the USB to mini USB data cable had connected to the MP3
player/MP4 player to the USB terminal of the unit.
b. Slide the FUNCTION switch on the top panel of the unit to select DVD function, then press “MULTIMEDIA”
button on the remote control to select USB input, on the TV screen will displayed USB READ. Unit will
reading attached USB Flashdisk for a moment.
c. For the next operational please refer “Playing MP3/MPEG4/JPEG disc”.
2. SD/MMC/MS Card :
a. Insert SD/MMC/MS card that contains MP3/MPEG4/JPEG files to the SD/MMC/MS card slot terminal
on the top panel of the unit.
b. Slide the FUNCTION switch on the top panel to DVD function, then press “MULTIMEDIA” button on the
remote control to select CARD input, on the TV screen will displayed CARD READ. Unit will reading
inserted SD/MMC/MS card for a moment.
c. For the next operational please refer “Playing MP3/MPEG4/JPEG disc”.
Note :
If you are using memory card storage media that use an adapter, make sure you has plug the memory card
to its adapter before you insert it to the SD/MMC/MS card slot terminal for your compatibly.
10 11
Next/Previous
When play, press “ ” (next) button to go to the next chapter (DVD) or track (SVCD/VCD/
CD/MP3). Previous : When beginning play, press “ ” (previous) to go to the previous
chapter (DVD) or track (SVCD/VCD/CD/MP3).
Note : For DVD/SVCD/VCD, you can go to the previous title/chapter/track (by “ ” button)
if played time is less than 3 seconds, if more than 3 seconds the current title/chapter/track that will be played
again.
Fast Forward/Fast Reverse
You can find a certain part of the disc/chapter/track using this fucntion. Press
“ ” / “ ” button to search forward/reverse the certain part of the disc,
repeat the pressing to select 2x, 4x, 8x, 16x and 32x search speed. Press “ /
” button on the remote control or “ ” button on the front panel to back
to play normal.
Note : - While playing SVCD/VCD/MP4 disc, if fast forward reach the beginning part of the next track, it will
back to normal play.
- While playing SVCD/VCD/MP4 disc, if fast reverse reach the beginning part of the current track, it
will back to normal play.
- While playing DVD/SVCD/VCD/MP4 disc, while fast forward or fast reverse there will be no sound
(mute).
Slow (slow motion play)
When play press “SLOW/AM/FM” button, repeat pressing “SLOW/AM/FM”
button until you get desired speed. Available slow motion speed are : 1/2, 1/
4, 1/8, 1/16 then back to normal. Press “ / ” button on the remote control to back to normal play.
Note : Slow motion does not works for MP3/JPEG/CD disc. Slow motion only works for DVD/SVCD/VCD/
MPEG4 disc.
Step (frame by frame)
When playing DVD/SVCD/VCD/MPEG4 disc, step is used to play the scene frame by frame.
Press “ /STEP” button to activate step function. Each time “ /STEP” button is pressed,
picture is played frame by frame. Press and hold “ /STEP” button to play step function continuously. Press
“ / ” button on the remote control to back to normal play.
Repeat Play
This function is used to repeat certain title/chapter/track or entire disc.
DVD disc repetition : While
playing DVD disc, title/chapter
or all entire disc can be repeated. Press “REPEAT” button repeatedly to select repetition mode : CHAPTER,
TITLE, ALL and OFF (off REPEAT function).
SVCD/VCD disc repetition : While playing SVCD/
VCD disc, track or all entire disc can be repeated.
Before using this function, make sure you has turn off PBC (play back control) function. Press “REPEAT”
button repeatedly to select repetition mode : TRACK, ALL and OFF (off REPEAT function).
MPEG4/MP3/JPEG disc repetition : While playing MPEG4/MP3/JPEG disc, there are 4 play mode : REPEAT
ONE (continuously repeat the selected track), REPEAT FOLDER (continuously repeat all tracks in entire played
folder), RANDOM (play all tracks in entire played folder by randomly) and CONTINUE (play all tracks in entire
played folder sequencely). Press “REPEAT” button repeatedly to select the one of the repetition mode.
CD disc repetition : While playing CD disc, available repeat mode : TRACK, ALL, RANDOM and CONTINUE.
5. If you are playing SVCD/VCD/CD disc, on the TV screen will appear :
6. To exit from PROGRAM, press “ / / / ” navigator button to point
cursor to the EXIT, then press “ / ” button on the remote control.
Note :
1. If only there is 1 title on the DVD disc, program menu display will same
as SVCD/VCD/CD disc program menu display.
2. To exit from PROGRAM play, press “PROG/MEM” button to enter to program menu, select STOP, then
select EXIT. Other way, press “ ” (stop) button twice.
3. RESUME function can works in PROGRAM mode.
4. Program only works when playing DVD/SVCD/VCD/CD disc.
Menu Play (DVD disc)
Disc menu will displayed automatically after DVD disc is loading. When TV screen displayed menu, use “ /
/ / ” navigator button on the remote control to select, then press “ / ” on the remote control. If there
is number option, use “0-9” numeric buttons on the remote control to select directly. To display disc menu
while playing, press “PBC/MENU” button on the remote control, so TV screen will displayed disc menu.
Title Play (DVD disc)
When playing DVD disc, press “TITLE” button on the remote control to go to DVD title. Use “ / / / ”
navigator button on the remote control to select, then press “ / ” button on the remote control. And what
is more, you can use “0-9” numeric buttons to select directly.
Track/Chapter selection
When playing disc, you can select track/chapter directly using “0-9” numeric buttons. For VCD 2.0 disc, turn
off PBC function first (by pressing “PBC” button on the remote control).
Example : To play track 8th, press “8” numeric button. On the
TV screen displayed :
Example : For track 18th, press “1” followed by “8” numeric
button. On the TV screen displayed :
For DVD disc on stop condition, numeric button pressing will go to the GO TO TITLE and CHAPTER menu. Then
you should fill-in preferred title and chapter number.
Program Play
Used to playing programmed chapter or track with preferred sequence, maximum until 20 program.
1. Press “PROG/MEM” button on the remote control to enter to PROGRAM mode.
2. On PROGRAM menu, use “ / / / ” navigator button to highlight, then press “0-9” numeric buttons to fill
in title, chapter or track number. To fill-in 1st-9th title, chapter or track number, the filling should begin with
zero number, example : for 5th title, chapter or track, press “0” and “5” sequencely.
3. To start playing PROGRAM, use “ / / / ” navigator button to go to the START option, then press
“ / ” button on the remote control.
4. If you are playing a DVD disc, on the TV screen will appear :
Loading...