Phone
Systems
Start up guide
Polycom VVX250 handset
www.katcommunications.co.uk
Your quick start guide
12
18
17
16
15
3
14
4
13
12
11
10
5 6 87 9
1 Line Keys
2 Reversible Tab
3 Speaker
4 Back Key
5 Transfer Key
6 Hold Key
7 Volume Keys
8 Dial Pad
9
Mute Key
10 Speakerphone Key
11 Headset Key
12 USB Port
13 Home Key
14 Navigation keys / Select Key
15 Soft Keys
16 Security slot (on back)
17 Screen
18 Message Waiting Indicator
Installing Your DECT Phone
The box for your handset will contain a number of items:
• The main phone chassis
• A plastic ‘foot’ which should be attached to the base of the chassis
• A handset receiver
• A curly wire to attach the receiver to the main chassis
• An RJ45 Ethernet cable to connect the handset to your local network
If you have ordered a power supply unit (PSU) then this will be provided separately. Note that the phone does not need a PSU if your
network supports power over Ethernet (POE).
The phone has a second Ethernet port which can be used to attach another device (e.g. your PC) to the same network port in your office.
The phone also supports the use of a headset which should be attached using an RJ9 square type connecting cable to the appropriate
socket on the rear of the chassis.
Once the handset is powered and connected to your network it should boot up ready for use, with the correct extension number, date and
time displayed on the screen.
In the event that the handset does not boot up correctly then please contact our Support team.
Loading...