Polycom 420, SX-50, SX-2000, SX-200 User Manual 2
Wireless Telephone Quick Reference Guide
q
Mitel SX50/200/2000
Superset 420
SpectraLink 6020 Wireless Telephone
Superset 420
The diagram above shows how the Superset 420 keypad
corresponds to the Wireless Telephone.
The Wireless Telephone user will press LINE then 1-9 to
access Line Select Keys 1-9. Press LINE then * to access
the Superkey functions.
FCN followed by * on the Wireless Telephone is equivalent
to using the left softkey, FCN 0 equals the middle softkey,
and FCN # e
Function Key
Strokes
FCN + 1 MUTE
FCN + 2 XFER/CONF
FCN + 3 REDIAL
FCN + 4 MSG
FCN + 7
FCN + 8
FCN + 9
FCN + * Left Softkey
FCN + 0 Center Softkey
FCN + # Right Softkey
FCN + * Superkey
LINE + 0 CANCEL
uals the right softkey.
Default
Settings
Fill In Your
Feature Settings
On/Off Press and hold END. Two
chirps on, one chirp off
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this
at the end of each call.
Answer call Press START. Line indicator
comes on steady when the call
is answered.
Answer
second call
Hold Press HOLD
Take off Hold Press LINE followed by the digit
Mute On/Off Press the
Function Pressing FCN while off hook
User Options Press the
For information on Battery Pack charging
and setting user preferences, see the
Wireless Telephone User Guide.
Press HOLD to put your current
call on hold, or END to hang up.
Press LINE + the digit that is
flashing.
for the line on hold, which will be
flashing.
MUTE softkey.
allows you to scroll through
menu screens.
CFG softkey while on
hook to change handset
settings.
1725-36154-001_D Superset is a trademark of Mitel Networks Corporation
info@polycom.com • 800.775.5330
Loading...