Polycom IP 430 User Manual
SoundPoint® IP 430
Quick User Guide
Basic Phone Features
Customizing Your Phone
Applies to phones running SIP 1.6 or
later.
For detailed information please consult
the comprehensive SoundPoint IP 430
User Guide available at:
www.polycom.com/voip/
©2006 Polycom, Inc. All rights reserved.
Polycom, the Polycom logo and SoundPoint are registered
trademarks of Polycom, Inc. in the U.S. and various countries.
All other trademarks are the property of their respective owners.
Information in this document is subject to change without notice.
BASIC PHONE FEATURES
PLAC ING A CALL
Using the Handset:
Pick up the handset and enter the
number or enter the number first, and
then pick up the handset.
Using the hands-free Speakerphone:
1. With the handset on-hook, press:
- any assigned line key, or
- the NewCall soft key.
2. Dial the number.
Or dial the number, and then press the
Dial soft key.
Using the optional Headset:
1. With the headset connected, press:
- any assigned line key, or
- the NewCall soft key.
2. Press
3. Dial the number.
Or dial the number, and then press
.
.
During a call, you can alternate
between hands-free, headset, handset
or modes by pressing the or
keys, or picking up the handset.
ANSWE R I N G A C AL L
Using the Handset:
Pick up the handset.
Using the Speakerphone:
Press:
button, or
-
- the line key, or
- the Answer soft key.
Using the optional Headset:
Press
.
Incoming calls may be ignored by
pressing the Reject soft key or
Invoking Do Not Disturb during ringing.
ENDING A CALL
Using the Handset:
Hang up or press the EndCall soft key.
Using the Speakerphone:
Press
Using the optional Headset:
Press
or the EndCall soft key.
or the EndCall soft key.
MICROPHONE MUTE
During a call, press
. Mute applies to
all modes: handset, headset, and
hands-free. You can hear all other
parties while Mute is enabled.
To turn off Mute, press
again.
CALL HOLD AND RESUME
1. During a call, press
or the Hold
soft key.
2. Press
again, the Resume soft
key, or the line key to resume the call.
LOCAL CONFERENCE CALLS*
To create a three-way local
conference call:
1. Call the first party.
2. Press the Cnfrnc soft key to create a
new call (the active call is placed on
hold).
3. Place a call to the second party.
4. When the second party answers,
press the Cnfrnc soft key again to join
all parties in the conference.
When a conference has been
established, pressing the Split soft
key will split the conference into two
calls on hold.
Placing the call on hold on the
conference originator’s phone will
place the other parties in the
conference on hold.
A conference may be created at any
time between an active call and a call
which is on hold (on the same line or
another line) by pressing the Join soft
key.
Ending the call on the conference
originator’s phone will allow the other
parties to continue the conference.
____
* - Conferencing is an optional feature that must be
configured on the call server. Particulars and menu
options may vary.
CALL TRANSFER
1. During a call, press the Trnsfr soft
key (the active call is placed on hold).
2. Place a call to the party to which you
want to transfer the call.
3. After speaking with the second party,
press the Trnsfr soft key to complete
the transfer.
Press the Blind soft key to transfer the
call without speaking to the second
party.
Transfer may be cancelled during
establishment by pressing the Cancel
soft key. The original call is resumed.
CALL FORWARDING
To enable call forwarding:
1. Press the Fwd soft key from the
phone’s idle display or press
and select Features, and then
Forward.
2. Enter a number to forward all future
calls to.
3. Press the Enable soft key to confirm
Call Forwarding. A moving arrow icon
appears for that line to confirm Call
Forwarding is enabled.
To disable call forwarding:
1. Press the Fwd soft key from the
phone’s idle display or press
and select Features, and then
Forward.
2. Press the Disable soft key.
Call forwarding is not available on
shared lines.
If call forwarding is configured on the
call server (invoked using * code dialing
or from a PC-based application), then
particulars and menu options may vary.
REDIAL
Press the Redial soft key or
button to redial the most recently dialed
number.
SoundPoint IP 430 Quick User Guide. 1725-12440-001 Rev A. 12/2006 1
DO NOT DISTURB
Press
then select Do not disturb
the phone from ringing on incoming
calls. A Do Not Disturb icon appears for
all lines to confirm that Do Not Disturb
is enabled.
Press
then select Do not disturb again to
turn off Do Not Disturb.
CALL LISTS
Press
followed by Call Lists. Information on
respective calls will be displayed.
From this screen, choose the
appropriate soft key:
1. Edit to amend the dial string before
dialing.
2. Dial to return the call.
3. Info to view detailed call information.
4. Save to store the contact to the
Contact Directory.
5. Clear to delete the call from the list.
Press the Exit soft key to return to the
idle display.
To quickly view respective call lists from
the idle display:
Press for Placed Calls.
Press for Received Calls.
Press for Missed Calls.
VOICE MAIL*
Message Waiting Indicator on the front
of the phone and individual line
indicators will flash and the stutter dial
tone in place of normal dial tone will
sound to indicate that message(s) are
waiting at the message center.
To listen to voice messages:
1. Press
2. Follow voice prompts to listen to
messages.
______
* - Voice Mail is an optional feature that must be
configured on the call server. Particulars and menu
options may vary.
and select Features, and
to prevent
and select Features, and
, then select Features
.
SPEED DIALING
To assign a speed dial index, see
CONTACT DIRECTORY below.
To dial a contact assigned to a line key,
press the corresponding line key.
To quickly view the speed dial list from
the idle display, press
.
CUSTOMIZING YOUR PHONE
CONTACT DIRECTORY
To add a contact in your local phone
directory:
1. Press
followed by Contact Directory.
2. Press the More soft key, then the
Add soft key to enter another contact
into the phone’s database.
3. Enter first and/or last name from the
dial pad. Press the 1/A/a soft key to
select between numeric and upper /
lower case alphanumeric modes. Press
the Encoding soft key to access
special characters in other languages if
necessary.
4. Enter a unique contact phone
number (not already in the directory).
5. Change the Speed Dial Index if
desired. It will automatically be
assigned the next available index value.
6. Modify the remainder of the fields
(Ring Type, Divert Contact, Auto
Reject, and Auto Divert) if desired.
7. Press the Save soft key to confirm or
the Cancel soft key to abandon the
changes, then press
soft keys to return to the idle display.
Contacts can be easily added from
Call Lists. For more information, see
CALL LISTS section above.
To search for a contact:
1. Press
followed by Contact Directory.
2. Press the More soft key, and then
the Search soft key.
, then Features
, then Features
or the Exit
3. Using the dial pad, enter the first few
characters for First or Last names.
4. Press the Search soft key to search
for contacts. Searches are case
insensitive. Dial successful matches
from the resulting search screen.
To edit a contact:
1. Press
followed by Contact Directory.
2. Search for contact (see above).
3. Press the Edit soft key and make the
necessary changes.
4. Press the Save soft key to confirm or
the Cancel soft key to abandon the
changes, then press
soft keys to return to the idle display.
VOLUME ADJUSTMENT
Press the
adjust handset, headset, and handsfree speaker volume during a call.
Pressing these keys in idle state adjusts
the ringer volume.
To conform to regulatory requirements,
handset and headset volume will return
to a preset level after each call, but the
configuration can be changed by your
system administrator. Hands-free
volume settings will be maintained
across calls.
RING TYPE
You can select different rings to match
your preferences and distinguish
between calls on lines.
To change the incoming ring:
1. Press
2. Select Settings, followed by Basic,
and then Ring Type.
3. Using
ring type. Press the Play soft key to
hear the selected ring type.
4. Press the Select soft key to change
to the selected ring type.
5. Press
return to the idle display.
, then Features
or the Exit
volume keys to
.
or , highlight the desired
or the Exit soft keys to
DISTINCTIVE RINGING / CALL
TREATMENT
You can set distinctive incoming ringing
tones for different contacts in your local
directory.
To set a distinctive ring for a local
contact:
1. Press
followed by Contact Directory.
2. Search for the contact (see
CONTACT DIRECTORY above).
3. Press the Edit soft key and scroll
down to Ring Type.
4. Enter a number corresponding to one
of the ring types available (see RING
TYPE above).
5. Press the Save soft key or the
Cancel soft key to abandon the
change, then press
the idle display.
HEADSET MEMORY MODE
For permanent or full-time headset
users, there is an option to default all
calls to the headset.
To enable Headset Memory Mode:
1. Press
followed by Basic, Preferences, and
Headset Memory.
2. Use
Select soft key to enable Headset
Memory Mode.
To activate Headset Memory Mode:
Press
flash.
To disable Headset Memory Mode:
Repeat steps 1 and 2 and select
Disable.
, then Features
to return to
and select Settings
and and press the
twice. The Headset icon will
SoundPoint IP 430 Quick User Guide. 1725-12440-001 Rev A. 12/2006 2
Loading...