Polycom Hicom 150 User Manual
PQRS TUV WXYZ
789
#
0
*
Wireless Telephone Quick Reference Guide
Siemens Hicom 150
optiset E Basic
optiset E Basic
Pressing LINE followed by a digit (1 or 2) on the Wireless
Telephone is equivalent to pressing one of the line keys
on the optiset E Basic (lines 1 and 2).
Pressing FCN followed by a digit (2-6) on the Wireless
Telephone is equivalent to pressing one of the
programmable feature keys on the optiset E Basic desk
set. FCN followed by 9 allows you to exit the Wireless
Telephone function menu.
The OptiGuide™ Select, Previous, and Next keys do not
exist on the optiset E Basic desktop telephone, but these
functions will display and can be accessed on the Wireless
Telephone using the default function menu sequences
shown below.
Toggle between the two display views in order to see all
24 possible characters per line sent by the Hicom CS by
pressing LINE + #
Function Key
Strokes
FCN + 1 MUTE
FCN + 2 (Voice Mail)
FCN + 3
FCN + 4
FCN + 5
FCN + 6
FCN + 0
FCN + *
FCN + #
FCN + 9 (Exit menus)
► and LINE + *◄. Use the arrow icons
Default
settings
Fill In Your
Feature Settings
SpectraLink 6020 Wireless Telephone
On/Off Press and hold END. Two
chirps on, one chirp off
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this
at the end of each call.
Answer call Press START. Line indicator
comes on steady when the call
is answered.
Answer
second call
Hold Press HOLD
Take off Hold Press LINE followed by the digit
Mute On/Off Press the
Function Pressing FCN while off hook
User Options Press the
For information on Battery Pack charging
and setting user preferences, see the
Wireless Telephone User Guide.
Press HOLD to put your current
call on hold, or END to hang up.
Press LINE + the digit that is
flashing.
for the line on hold, which will be
flashing.
MUTE softkey.
allows you to scroll through
menu screens.
CFG softkey while on
hook to change handset
settings.
1725-36160-001_E Hicom is a trademark of Siemens
info@polycom.com • 800.775.5330
Loading...