Polycom Group Series Reference Manual

1 2 3 4 5

6

Polycom Group Series Reference Guide

Ensure that the power cable is

plugged into the power outlet in the
wall.

Confirm that the network cable is
plugged into the network outlet in the
wall. The network cable must be
plugged into a dedicated OTN network
outlet.

Verify that the power bar is turned
on. The power bar supplies the whole
system and you can turn off your system
here at the end of your session.

Ensure that the monitor is on. If you
cannot see the camera view, you may
have to switch the video source.

Check that the codec/camera is on

by checking the LED light at the front
of the codec

Pick up the remote control and
unmute your videoconferencing sound
by pressing the “Mic Off” button on the
remote control.

TECHNICAL SUPPORT 1-866-454-6861

Polycom Group Series Reference Guide

The Extron box enables you to select a specific video input. For peripheral
devices, please ensure that number 1 is selected. For computers or laptops,
confirm that number 4 is selected. At this point, you can use the Presentation
button on the remote to switch between the main camera and your presentation.

The Kramer video switcher enables you to select different medical
peripheral devices. Always confirm that the number 1 is selected on the Extron

box before using. Use the Presentation button on the remote to switch between
the main camera and the selected peripheral video source.