INSTRUCTIONAL
TECHNOLOGY
Polycom Group 700
Quick Guide
DESCRIPTION
1
LED IR emitter
2
Decrease speaker volume
3
Increase speaker volume
4
Zoom camera out
5
Zoom camera in
6
Select button - Press center button to select
highlighted menu item
7
Navigate through menu items using the Up,
Down, Left, and Right buttons; pan/tilt the
camera
8
Delete letters or numbers or go back to a
previous screen
9
Display the Menu screen.
10
Return to the Home screen
11
Place or answer a call
12
End or reject a call
13
Enter letters or numbers
14
In camera control mode, move the camera to a
stored preset or press and hold a number to
store a preset
15
Generate touch (DTMF) tones
16
Mute a microphone
GET VTT HELP
Hotline:
352-588-7400
Web:
www.saintleo.edu/vtt
Using the Remote Control
INSTRUCTIONAL
TECHNOLOGY
Polycom Group 700
Quick Guide
Powering On
Press any button on the remote control or pick up the remote control to wake up the system if it is asleep.
Navigating the User Interface
To accomplish tasks, you can press buttons directly on your remote control or use your remote control to
navigate menus on the left side of the on-screen user interface.
To open the Menu:
Using your remote control, do one of the following:
Press .
On the Home screen, select .
To return to the previous screen:
Using your remote control, do one of the following:
Press .
Navigate to < Back and select it.
Controlling What You Hear
To adjust the volume:
On the remote control, press and hold or to increase or decrease the near-end volume.
To mute or unmute the microphone:
Press on the remote control.
If a Polycom tabletop microphone array is connected to your system, you can also mute the call by
touching on the microphone.
This near-end icon appears on the monitor display whenever you are muted.
Loading...