Polycom ETJ-16DC-2 User Manual

Wireless Telephone Quick Reference Guide

NEC NEAX

ETJ-16DC-2 Desk Set

The figure above shows the mapping of the ETJ-16DC-2 display set to the SpectraLink Wireless Telephone

Pressing LINE followed by a digit Telephone is equivalent to pressing one of the line keys on the ETJ-16DC-2.

Pressing FCN followed by a digit Telephone is equivalent to pressing one of the four programmable function keys on the desk set.

Function Key

Strokes

FCN + 1 MUTE FCN + 2 TRF FCN + 3 CNF FCN + 4 LNR/SPD FCN + 5 RECALL FCN + 6 FCN + 7 FCN + 8 FCN + 9 FCN + 0 FCN FCN + * EXIT MENUS

Default

Settings

(1-9) on the Wireless

(6-9) on the Wireless

Fill In Your

Feature Settings

SpectraLink 6020 Wireless Telephone

On/Off Press and hold END. Two

chirps on, one chirp off

Make a call Press START to get dial tone.

Hang up Press END. Be sure to do this

at the end of each call.

Answer call Press START. Line indicator

comes on steady when the call is answered.

Answer

second call

Hold Press HOLD

Take off Hold Press LINE followed by the digit

Mute On/Off Press the

Function Pressing FCN while off hook

User Options Press the

For information on Battery Pack charging

and setting user preferences, see the

Wireless Telephone User Guide.

Press HOLD to put your current call on hold, or END to hang up. Press LINE + the digit that is flashing.

for the line on hold, which will be flashing.

MUTE softkey.

allows you to scroll through menu screens.

CFG softkey while on

hook to change handset settings.

1725-36155-001_E NEAX is a trademark of NEC Corporation

For technical support, please contact

your facility’s Network Administrator.