Polycom DOC2548A User Manual

Polycom RMX™ 4000 Hardware Guide

Version

6.0

| April 2010 | DOC2548A

Trademark Information

Polycom®, the Polycom “Triangles” logo, and the names and marks associated with Polycom’s products are trademarks and/or service marks of Polycom, Inc., and are registered and/or common-law marks in the United States and various other countries.

All other trademarks are the property of their respective owners.

Patent Information

The accompanying product is protected by one or more U.S. and foreign patents and/or pending patent applications held by Polycom, Inc.

Polycom, Inc. 4750 Willow Road Pleasanton, CA 94588-2708 USA

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing includes translating into another language or format. As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the software contained within its products. The software is protected by United States copyright laws and international treaty provision. Therefore, you must treat the software like any other copyrighted material (e.g., a book or sound recording).

Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc., is not responsible for printing or clerical errors. Information in this document is subject to change without notice.

CE MARK R&RTTE Directive

Česky [Czech]: Polycom (UK) Ltd tímto prohlašuje, že tento RMX 4000 je ve shodě se

základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk [Danish]: Undertegnede Polycom (UK) Ltd erklærer herved, at følgende udstyr RMX

4000 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/ EF.

Deutsch [German]: Hiermit erklärt Polycom (UK) Ltd, dass sich das Gerät RMX 4000 in

Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Eesti [Estonian]: Käesolevaga kinnitab Polycom (UK) Ltd seadme RMX 4000 vastavust

direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.

English: Hereby, Polycom (UK) Ltd. Declares that this RMX 4000 is in compliance with

the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español [Spanish]: Por medio de la presente Polycom (UK) Ltd declara que el RMX 4000 cumple

con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Ελληνική [Greek]: ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Polycom (UK) Ltd ΔΗΛΩΝΕΙ ΟΤΙ RMX 4000

ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

Français [French]: Par la présente Polycom (UK) Ltd déclare que l’appareil RMX 4000 est

conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Italiano [Italian]: Con la presente Polycom (UK) Ltd dichiara che questo RMX 4000 è conforme

ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Íslenska (Icelandic): Hér með lýsir Polycom (UK) Ltd yfir því að RMX 4000 er í samræmi við

grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC

Latviski [Latvian]: Ar šo Polycom (UK) Ltd deklarē

, ka RMX 4000 atbilst Direktīvas 1999/5/EK

būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių [Lithuanian]: Šiuo Polycom (UK) Ltd deklaruoja, kad šis RMX 4000 atitinka esminius

reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

Nederlands [Dutch]: Hierbij verklaart Polycom (UK) Ltd dat het toestel RMX 4000 in

overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Malti [Maltese]: Hawnhekk, Polycom (UK) Ltd, jiddikjara li dan RMX 4000 jikkonforma mal-

ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Magyar [Hungarian]: Alulírott, Polycom (UK) Ltd nyilatkozom, hogy a RMX 4000 megfelel a

vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Norsk [Norwegian]: Polycom (UK) Ltd erklærer herved at utstyret RMX 4000 er i samsvar med de

grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski [Polish]: Niniejszym Polycom (UK) Ltd oświadcza, że RMX 4000 jest zgodne z

zasadniczymi wymaganiami oraz innymi stosownymi postanowieniami Dyrektywy 1999/5/WE

Português [Portuguese]: Polycom (UK) Ltd declara que este RMX 4000 está conforme com os requisitos

essenciais e outras disposições da Directiva 1999/5/CE.

Slovensko [Slovenian]: Polycom (UK) Ltd izjavlja, da je ta RMX 4000 v skladu z bistvenimi zahtevami

in ostalimi relevantnimi določili direktive 1999/5/ES.

Slovensky [Slovak]: Polycom (UK) Ltd týmto vyhlasuje, že RMX 4000 spĺňa základné požiadavky

a všetky príslušné ustanovenia Smernice 1999/5/ES.

Suomi [Finnish]: Polycom (UK) Ltd vakuuttaa täten että RMX 4000 tyyppinen laite on direktiivin

1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Svenska [Swedish]: Härmed intygar Polycom (UK) Ltd att denna RMX 4000 står I

överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Regulatory Notices

Russian Communication Certificate

The Polycom RMX™ 4000 complies with the Russian Ministry of Communication requirements stated in certificate 2795. Expiration date 17/03/2014.

Chinese Communication Certificate

Complies with IDA standards DA101619

Singapore Certificate

Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Main Features .......................................................................................... 1-1

RMX 4000 Specifications ....................................................................... 1-2

System Capacities ........................................................................... 1-3

MPM+ Resource Capacities .......................................................... 1-4

Safety Requirements .............................................................................. 1-6

Site Safety Requirements ............................................................... 1-6

General Installation Precautions .................................................. 1-7

Rack Mount Safety Precautions .................................................... 1-7

Installing the RMX 4000 ......................................................................... 1-8

Unpacking the RMX 4000 .............................................................. 1-8

Installing the RMX in a Rack or as a Standalone ..................... 1-10

Standalone RMX 4000 Installation ..................................... 1-10

Rack Mount Preparations .................................................... 1-10

Placing the RMX 4000 in a 19” Rack .................................. 1-11

Placing the RMX 4000 in a 23” Rack .................................. 1-13

Reverse Mounting the RMX 4000 in a Rack ..................... 1-14

Connecting the RMX 4000 to Power Sources ........................... 1-15

Connecting the RMX 4000 to AC Power ........................... 1-16

Connecting the RMX 4000 to -48DC SELV Power ........... 1-17

Types of DC Circuit Breakers installed on the RMX 4000 ......

................................................................................................. 1-18

Connecting Cables on the RMX 4000 ......................................... 1-19

First-time Power-up ..................................................................... 1-20

RMX 4000 Components ....................................................................... 1-21

RMX 4000 Front Panel ................................................................. 1-21

RMX 4000 Rear Panel ................................................................... 1-24

RTM-IP 4000 .................................................................................. 1-25

RTM ISDN ..................................................................................... 1-27

ISDN/PSTN Clock Source .................................................. 1-28

RTM LAN ...................................................................................... 1-28

AC Power Entry Module (PEM) ................................................ 1-28

Polycom RMX 4000 Hardware Guide

Table of Contents

DC Power Rail Module ................................................................ 1-29

Component Slot Allocation ......................................................... 1-29

RMX 4000 LEDs .................................................................................... 1-31

RMX 4000 Front Panel LEDs ....................................................... 1-31

RMX 4000 Rear Panel LEDs ........................................................ 1-34

RTM-IP 4000 .......................................................................... 1-34

RTM LAN .............................................................................. 1-35

RTM ISDN ............................................................................. 1-36

Component Replacement . . . . . . . . . . . . . . . . . . . . . . . 2-1

Using the Modified PMC Compatible Ejector Lever ................ 2-3

Replacing the CNTL 4000 Module ............................................... 2-4

Replacing an AC Power Supply Module .................................... 2-5

Replacing an AC Power Entry Module (PEM) .......................... 2-6

Replacing a DC Power Rail Module (PRM) ............................... 2-7

Replacing the Fan Drawer ............................................................. 2-9

Inserting an Air Filter (Optional) in the Fan Drawer .............. 2-10

Replacing a Faulty MPM+ Card ................................................. 2-11

Removing the MPM+ Card from the MCU ...................... 2-11

Installing the Replacement MPM+ Card .......................... 2-13

Installing a New MPM+ Card in a Powered On RMX 4000 .. 2-14

Replacing a RTM ISDN Card ...................................................... 2-14

Replacing the RTM-IP 4000 ......................................................... 2-16

Replacing the RTM LAN ............................................................. 2-17

Replacing the Fabric Switch Module (FSM 4000) .................... 2-18

Hardware Description

This Hardware Guide provides information on the RMX 4000 and its components. This system utilizes a modular “universal slot” platform, whose components are designed for high performance, capacity and reliance.

Main Features

The Polycom RMX 4000 offers the following features:

•Linux® based

• Chassis based on the ATCA standard

• Built-in redundancy, hot swappable parts

• Physical network and media separation between management and signaling networks, with high speed switching fabric on the media boards increasing system bandwidth

• Support for standard network interfaces (IP, ISDN and LAN) and large number of ports.

• H.323, SIP video, PSTN and ISDN

• New hardware technologies

• High availability, redundancy, on-line upgrading and dynamic resource allocation

• Easy integration of conference elements into external network management

• Enhanced Continuous Presence (multi-image video)

• IVR (Interactive Voice Response) module

• Resilient multipoint conferencing - Polycom Lost Packet Recovery (LPR)

Chapter 1- Hardware Description

RMX 4000 Specifications

Table 1-1 Polycom RMX 4000 Specifications

Physical

Height 6U (26.56 cm.)

Width 19” (48.26 cm.)

Depth 15.74” (40 cm.)

Weight Up to 40 Kg.

IP Protocols

Audio G.711, G.722, G.722.1, G.729A, G.723.1, Siren14.

Video H.261, H.263, H.264.

Network Interfaces

IP, ISDN, PSTN and LAN H.323, SIP, PSTN, LAN and ISDN.

1-2

Power Supply

AC Input/ Range, BTU Voltage range:100-240 VAC, 14-7 AMP, 50/60

Hz. BTU output: 5120.

DC Input/Range, BTU Voltage range:-40.5-60 V DC SELV, with circuit

breaker. Typical: -48V DC Voltage up to 25 Amp. BTU output: 4270. Maximum 4600: per hour.

Power Consumption

AC Maximum Power consumption

DC Maximum Power consumption

Environment

Operating temperature 10°– 40°C (50°– 104°F).

1500Watts

1250Watts

Polycom RMX 4000 Hardware Guide

Table 1-1 Polycom RMX 4000 Specifications (Continued)

Storage temperature -40°– 70°C (40°– 158°F).

Relative humidity 15% - 90% no condensing.

Operating altitude 60m below sea level, up to 3,000 m (10,000 ft.).

Operating ESD 4kV.

System Capacities

The following table summarizes the different system capacities.

Table 1-2 System Functions and Capacities

System Functions Capacity

Maximum no. of participants (mixed) in a conference 800

Maximum number of participants (video) in a conference

Maximum number of conferences 800

Maximum number of Meeting Rooms 2000

Maximum number of Entry Queues 80

Maximum number of Profiles 80

Maximum number of Conference Templates 200

Maximum number of SIP Factories 80

Maximum number of IP Services 1

Maximum number of ISDN Services 2

Maximum number of IVR Services 80

Maximum number of Recording Links 1

Maximum number of IVR Video Slides 150

Maximum number of Reservations (Internal Scheduler)

160

4000

1-3

Chapter 1- Hardware Description

Table 1-2 System Functions and Capacities

System Functions Capacity

Maximum number of Log Files (1Mb max.) 8000

Maximum number of CDR Files 4000

Maximum number of Fault Files 1000

Number of Participant alerts Unlimited

Maximum number of concurrent RMX Web Client connections to the MCU

Maximum number Address Book entries 4000

Maximum number of Users 100

MPM+ Resource Capacities

Three MPM+ card assemblies are available: MPM+ 80, MPM+ 40 and MPM+ 20 offering various resource capacities for CP conferences.

Table 1-3 summarizes the video capacities of the various MPM+ card assemblies.

Table 1-3 MPM+ Card Assemblies and Resource Capacities for CP

Conferences

Card Type

MPM+ 80 400 80 30 20 10 10

MPM+ 40 200 40 15 10 5 5

Voic e CIF

SD @30fps

Resources

HD720p @30fps

HD720p @60fps

HD1080p @30fps

1-4

MPM+ 20 100 20 7 5 2 2

Polycom RMX 4000 Hardware Guide

Table 1-4 summarizes the resource capacities of the various video resource types in an RMX containing MPM+ cards.

Table 1-4 MPM+ Resource/Port Capacity

Resource Type Maximum Capacity (4 MPM+ Cards)

Voice 1600

PSTN 400

CIF 320

SD30 120

HD720p 80

HD1080p 40

720p VSW 4Mb 160

1080p VSW 4Mb 160

1080p VSW 6Mb 80

RMX memory size is listed in the Administration > System Information properties box.

In HD Video Switching conferences, an RMX with four MPM+ cards can support up to 160 participants at HD1080p resolution at bandwidths of up to 4Mbps and 80 participants at HD1080p resolution at bandwidths of up to 6 Mbps.

1-5

Chapter 1- Hardware Description

Safety Requirements

This section describes the requirements your site must meet for safe installation and operation of the system.

Site Safety Requirements

For your protection, please read these safety instructions completely before operating the equipment.

• Look carefully for potential hazards in your work area: moist floors, ungrounded power cables, frayed power cords, missing safety grounds and so forth.

• Locate the main circuit breaker within the room.

• Locate the emergency power OFF switch within the room.

• Never assume that power is disconnected from a circuit.

• Use only the power cords supplied with the system.

• Each power cord should only be connected to a power outlet that has a protective ground contact.

• Ensure that power cords are easily accessible from the back of the system at all times.

• Place the equipment in a well-ventilated area where the vents are free from obstruction.

• Do not place heavy objects directly on top of the RMX 4000 unit.

• Do not use liquids around your equipment.

• Keep the area around the RMX 4000 clean and free of clutter.

• Decide on a suitable location for the equipment rack that will hold the RMX

4000 unit. It should be situated in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and electromagnetic fields are generated. You will also need it placed near a grounded power outlet.

1-6

Polycom RMX 4000 Hardware Guide

General Installation Precautions

Attention:

The RMX 4000 can weigh up to 40kg when all slots are occupied. Two people are required to lift the MCU out of the box and also when installing it in a rack.

• Use a regulating uninterruptable power supply (UPS) to protect the

RMX

4000 from power surges and voltage spikes, to keep your MCU operating in case of a power failure. The RMX 4000 requires either two (DC) or three (AC) power supply cables, each connected to a power supply.

• Allow the power supply units to cool before touching them.

• When handling electronic components, standard anti-static precautions must be observed:

— Wear a grounding strap — Handle cards by their edges only and do not touch their

components or connector pins

— Keep components in anti-static bags, when not installed in the

RMX 4000

Rack Mount Safety Precautions

The following precautions should be followed when installing the RMX 4000 on a rack:

• The RMX 4000 has a height of 6U. Ensure this space is available on the rack.

• Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on them.

• In a single rack installation, stabilizers should be attached to the rack.

• In multiple rack installations, the racks should be coupled together.

• Always make sure the rack is stable before extending a component from the rack.

• You should extend only one component at a time - extending two or more simultaneously may cause the rack to become unstable.

• Before you install the rails, determine the placement of each component in the rack.

• Install the heaviest components on the bottom of the rack first, and then work up.

1-7

Chapter 1- Hardware Description

• Always keep the rack’s trays and card’s slots closed when not servicing, to maintain proper cooling.

Installing the RMX 4000

The following procedures have to be performed to install the RMX 4000 in your site:

• Unpacking the RMX 4000

• Installing the RMX in a rack or as a standalone

• Connecting the RMX 4000 to the power source

• Connecting the network (LAN, IP and ISDN) cables to the RMX

Unpacking the RMX 4000

To unpack and lift the RMX 4000:

1 When you receive the RMX 4000 packing case, inspect the equipment

for damage and verify that the components match the packing slip.

2 The RMX 4000 is shipped in a packing case with Stratocell®

packaging, and the top cover must be unlocked and lifted where the RMX is placed on the inside of an anti-static plastic bag.

3 Open the top cover of the packing case.

Two boxes are placed on the top Stratocell®, labelled: — Installation Accessories. This kit contains the power cables and a

USB Key.

— Rack Installation Accessories. This kit contains the accessories for

the 19” & 23” racks as follows:

1-8

Table 1-5 19” & 23” Rack Installation Accessories Package

Item ID Description Quantity

MEC2474A-L0 Chassis runner for rack installation

on the RMX 4000. 19” & 23” racks both require that these runners be installed on the rack.

MEC2475A-L0 23" bracket to be fitted to the front of

the RMX 4000.

Polycom RMX 4000 Hardware Guide

Make sure that boxes contain all the required parts.

4 Remove the boxes and top Stratocell®.

5 Holding the handle on each side, lift the RMX 4000 from the box, and

place it on a flat surface or install it in a rack. Remove any packaging material prior to positioning the RMX 4000.

Attention:

Two people are required to lift the MCU out of the box and when installing it in a rack.

1-9

Chapter 1- Hardware Description

Installing the RMX in a Rack or as a Standalone

Either place the RMX 4000 on a hard, flat surface such as a desktop or mount it on a 19”/23” rack.

Standalone RMX 4000 Installation

 Place the RMX 4000 on a flat surface or desktop. 

The RMX 4000 must rest on the four feet at the base of the MCU and must be shifted or moved into position using the two handles attached to the front.

Rack Mount Preparations

• Optional - Depending on the rack installed in your site, you may need to remove the handles if they are attached to the RMX 4000. Unscrew the handles from the chassis as shown in “Optional - Fast feet and handle removal”.

• Optional - If the opening in the rack that is allocated to the RMX 4000 is exactly 6U, the feet must be removed from the RMX 4000 to install it in the rack. Unscrew the feet from the chassis as shown in Figure 1-1, “Optional - Fast feet and handle removal”.

Figure 1-1,

1-10

Figure 1-1 Optional - Fast feet and handle removal

Polycom RMX 4000 Hardware Guide

Placing the RMX 4000 in a 19” Rack

1 When the RMX is to be rack mounted chassis runners must be

installed on the rack as shown in Figure 1-2. Two chassis runners are included in the Rack Installation Accessories kit and are attached facing inward from the outside of the 19”/23“rack mount.

Figure 1-2 Installing chassis runners and RMX in a rack

2 Mount the RMX on top of the rack brackets using the blades or

placing it on a rack mount shelf with runners.

1-11

Chapter 1- Hardware Description

3 Fasten the RMX to the rack with 8 screws into the holes provided on

Figure 1-3 RMX 4000 Rack Mount

the RMX’s front as shown in Figure 1-3.

1-12

Rack mounting screws must be supplied by the rack’s manufacturer.

The airflow of the RMX 4000 is from right to left. Be sure that the areas on the left and right side of the system are clear for proper

ventilation.

When the unit is installed on a rack, the rack must be properly grounded to the central office ground. The rack must be grounded with two-hole compressiontype connectors using copper conductors (tinned or untinned). Wire, bus bar or braided strap connectors are acceptable.

+ 42 hidden pages