Conference Link is a digital interface used to
connect Polycom equipment together to share audio
and control information. This table shows the types
of devices that may be connected together using
Conference Link.
HDX codecs
HDX table mic arrays
HDX codecs
HDX table mic arrays
Ceiling microphone arrays
RealPresence Group codecs
SoundStructure
RealPresence Group table mics
SoundStaon IP 7000
Ceiling microphone arrays
RealPresence Group codecs
RealPresence Group table mics
SoundStructure
SoundStaon IP 7000
There are different Conference Link cables and different connectors depending on the application of the cable.
The following table shows the different Conference Link cables that are available.
SKU
Connector 1
Type
2200-40115-001Walta maleWalta male25ft (7.6m)
2200-40115-
002Walta maleWalta male10ft (3m)
Connector 1
Drawing
Connector 2
Drawing
Connector 2
Type
LengthNotes
Cable - Console Interconnect Cable for SoundStation IP
7000, 25ft/7.6m CLink 2 cable with Walta to Walta
connectors. Connects two (2) SoundStation IP 7000
consoles together. Cross-over cable.
Cable - HDX microphone array cable, Walta to Walta
connectors, 10ft/3m. Connects an HDX microphone to
an HDX microphone or to SoundStation IP 7000. This
SKU includes the cable 2457-28978-001 listed below.
Cross-over cable.
2457-23215-001Walta maleWalta male15ft (4.6m)
2457-23216-001Walta maleWalta male25ft (7.6m)
2457-23216-002Walta maleWalta male25ft (7.6m)
2457-23574-001RJ45 maleRJ45
2457-23716-001RJ45 maleWalta female12in (0.3m)
2200-24008-001RJ45 maleRJ45 male50ft (15.2m)
2200-24009-001RJ45 maleRJ45 male25ft (7.6m)
male18in (0.5m)
Used with HDX 6000 - HDX 8000 and the HDX table
microphone arrays. Also for use with the SoundStation
IP 7000 and HDX table microphone arrays. Cross-over cable.
Included with the HDX table microphone arrays.
Cross-over cable.
RealPresence Group Series microphone array cable.
Connects Group Series microphone to Group Series
microphone or Group Series microphone to Group Series
codec. Not compatible with HDX table microphone array
due to different overmold. Cross-over cable.
Included with the SoundStructure device. Cross-over cable
for connecting Clink between devices such as
SoundStructure and HDX 9000 series codec.
Dongle for connecting HDX table microphone array to
SoundStructure or HDX 9000 series codec. Typically
included with the HDX 9000 series video systems.
Straight-thru cable.
Part of the primary Ceiling Microphone Array package.
Cross-over cable for connecting Clink between devices.
Typically used between SoundStructure a
Ceiling Microphone Array.
Part of the extension Ceiling Microphone Array package.
Cross-over cable for connecting CLink between devices.
Typically used between Ceiling Microphone Arrays.
nd the first
2200-24010-001RJ45 maleRJ45 male100ft (30.5m)
2457-24011-001RJ45 ma
2457-25646-001Walta maleRJ45 female12in (0.3m)
2457-28978-001Walta maleWalta male10ft (3m)
2457-29051-001Walta maleWalta male50ft (15.2m)
leRJ45 male10ft (3m)
Cross-over cable for connecting Clink between devices.
Typically used between SoundStructure and the first
Ceiling Microphone Array.
Straight-through cable that is part of the Ceiling Microphone
Array package. Must be used with a cross-over cable
for proper operation.
Dongle for connecting Ceiling Microphone Array or other
RJ-45 CLink 2 cable to HDX 8000/7000/6000 series
codecs. Included with primary Ceiling Microphone Array.
Straight-thru cable.
CLink 2 cable, HDX microphone array cable. Walta to
Walta. 10 ft/3m. Connects HDX microphone to HDX
microphone/Soundstation IP7000.
CLink 2 cable, HDX microphone array cable. Walta to
Walta. 10 ft/3m. Connects HDX microphone to HDX
microphone/Soundstation IP7000.
Conference Link Cross-Over Cable (unshielded).
Unshielded cable recommended for lengths of 25ft (7.6m)
or less.
8
1
1
8
P1P2
COLOR
WHITE/GREEN
GREEN
WHITE/BLUE
BLUE
WHITE/ORANGE
ORANGE
WHITE/BROWN
BROWN
AWG
24
24
24
24
24
24
24
24
P1
1
2
3
4
5
6
7
8
P2
5
6
3
4
1
2
7
8
Length Limitations
HDX 9000
or
SoundStructure
18” to 100ft18” to 25ft
<= 175ft / 53.3m
<= 175ft / 53.3m
18” to 25ft18” to 25ft
<= 175ft / 53.3m
SoundStructure
18” to 25ft18” to 100ft18” to 25ft
18” to 100ft
While not common, there are applications, such as
room-combining, where both Conference Link ports
on SoundStructure can be used to meet the length
requirements to the rst microphone array.
Page 5
Polycom Conference Link Quick Reference Guide
# mic arrays
OBAM to support more than 4 microphone arrays
OBAM to support more than 4 microphone arrays
HDX 4002 supports 3 mic arrays.
Two SoundStaon IP 7000 analog expansion microphones are supported. One addional microphone array is supported when used
with Group Series codecs, and two addional microphone arrays are
supported on HDX codecs.
maximum number of mic arrays.
Microphone Array Support
Device
supported
HDX 40003
HDX 60001
HDX 70002
HDX 80003
HDX 90004
Notes
Up to 4 microphone arrays can be used with each
2SoundStructure C8
4SoundStructure C12
4SoundStructure C16
2RealPresence Group 300
SoundStructure devices, but the number of microphone
elements supported on a C8 is limited to 8 microphone
elements.
Mulple SoundStructure devices can be linked together with
Mulple SoundStructure devices can be linked together with
Adding one or more SoundStructure devices connected over
Conference Link increases the number of mic arrays that can be
used to the limit of the SoundStructure device(s).
2RealPresence Group 500
3RealPresence Group 700
2SoundStaon IP 7000
Number of Microphone arrays
supported when connecng
devices with Conference Link.
SoundStructure C16
SoundStructure C16
HDX Series42
RealPresence Group Series42
SoundStaon IP 7000222
3725-33183-001
HDX Series
44
RealPresence Group Series
SoundStaon IP 7000
Notes:
Adding more SoundStructures increases the
A Mul-Interface module is required for
SoundStaon IP 7000 (2200-19300-001 for NA).
Page 6
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.