BackBeatFIT 6100
User Guide
Contents
Headphone overview 3
Uygulamanın kurulması 4
Fit 5
Eşleştirme 6
First time pair 6
Pair second device 6
Basics 7
Charge your Headset 7
Answer or end a call 7
Volume 7
Mute 7
Play or pause music 7
Track forward 8
Track backward 8
Use VPA (virtual personal assistant) 8
OpenMic 8
Support 10
2
OpenMic*
Headphone overview
Mute
Charge port
Headset LED
Power button
*OpenMic lets you hear surrounding sound without taking off your headphones. See "OpenMic".
3
Uygulamanın kurulması
iOS/Android™ işletim sistemleri için tasarlanan ücretsiz uygulamamız BackBeat'i yükleyerek
kulaklığınızdan en yüksek verimi alın.
Bu uygulamayı kullanarak şunları yapabilirsiniz:
• Dil seçimi
• Özellikleri açma/kapatma
• Kulaklığımı Bul
• Kullanım kılavuzunu görüntüleme
Kulaklıkla eşleştirilmiş tüm cihazlara BackBeat uygulamasını yükleyerek en yüksek verimi alın.
4
Fit
The BackBeat FIT 6100 has an adjustable headband system.
Unhook the cord on the headband from the top resting position and tighten by pulling and
securing the cord in the down position.
5
Eşleştirme
First time pair
Pair second device
1 Slide the power switch on. You hear "pairing" and the LEDs flash red and white.
2 Activate Bluetooth
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*
®
on your phone and set it to search for new devices.
NOTE *Menus may vary by device.
3 Select “PLT BBFIT6100.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.
1 Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and white.
2 Activate Bluetooth
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*
®
on your device and set it to search for new devices.
NOTE *Menus may vary by device.
3
Select “PLT BBFIT6100.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.
6
Basics
Charge your Headset
Answer or end a call
Volume
Use a micro USB cable to charge your headset; while charging the LED will show solid white. A full
charge takes up to 2.5 hours, the LED will turn off when charge is complete. A full charge delivers
24 hours of listen and talk time at 50% volume.
Tap the Call button located in the center of the right earcup to answer or end a call.
Swipe up or down on the outside of the right earcup to increase or decrease volume.
Mute
Play or pause music
To mute the audio, while on a call, press the mute button on the side of the right earcup.
Tap the center of the right earcup to pause or play audio.
7
Track forward
Swipe forward on the outside of the right earcup to track audio forward.
Track backward
Use VPA (virtual personal
assistant)
OpenMic
Swipe backwards on the outside of the right earcup to track audio backward.
To activate the virtual personal assistant press and hold the center of the right earcup for 2
seconds.
While not on a call, tap the Mute button to hear your surroundings. Swipe the outside of the right
earcup to adjust the amount of surrounding sound you hear.
8
9
Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
©
2019 Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by
Plantronics, Inc. is under license. All other trademarks are the property of their respective
owners.
215185-06 06.19 Model BF6100S
Plantronics B.V.
Scorpius 171
2132 LR Hoofddorp
Netherlands
10
Loading...