Polycom® EagleEye
The Polycom EagleEye MSR Camera system
includes a USB motorized pan-tilt-zoom (MPTZ)
camera and supports certified Skype Room Systems
docks only .
3725-61109-002A | August 2017
™
MSR Camera Quick Tips
Set Camera Home Position
» Press and hold the Select button for 5 seconds
until the LED light blinks green.
Move to Camera Home Position
» Press the Select button.
Zoom In or Out
Parts of the Remote Control
Number Description
1 Zoom camera out
2 Zoom camera in
3 Pan / tilt the camera using the up button
4 Pan / tilt the camera using the left button
5 Pan / tilt the camera using the right button
6 Press Select button to set the camera position
Indicator Lights
Indicator Description
Sending video
Sleep
Boot
Blinking amber lights indicate the firmware
upgrade is in progress
Blinking green lights indicate the camera
Home position is set
Wake the EagleEye MSR Camera
System
Y ou can wake the EagleEye MSR camera system in the
following ways:
● Press any button on the remote.
● Send the video content.
● Place a call.
● Press to zoom in.
● Press to zoom out.
Pan or Tilt
» Press the left, right, up, and down navigation
buttons to pan or tilt the camera.
More Information
For a better user experience, Polycom reco mm e nd s
using an Icron 2304 extender with the EagleEye MSR
Camera system to extend a USB connection.
For more information about setting up and using the
system, refer to support.polycom.com.
7 Pan / tilt the camera using the down button