Poly 204880-01 Quick Start Guide

PAI R

CONFIGURE

plantronics.com/documentation

plantronics.com/support

Plantronics, Inc.

345 Encinal Street

Santa Cruz, CA 95060

United States

© 2015 Plantronics, Inc. Plantronics is a trademark of Plantronics,
Inc. registered in the US and other countries, and BT600 is a
trademark of Plantronics, Inc. Bluetooth is owned by Bluetooth SIG
Inc., any use by Plantronics, Inc. is under license. Mac is a trademark
of Apple Inc. All other trademarks are the property of their respective
owners.

203936-01 08.15

Plantronics BV

South Point Building C

Scorpius 140

2132 LR Hoofddorp

Netherlands

BT600

ADAPTER

QUICK START GUIDE

Designed in Santa Cruz, California

To pair your high-fidelity Bluetooth®
USB adapter to your headset, do the
following:

1 Insert the USB adapter into your

laptop or computer and wait for your
computer to recognize it.

2 Put your headset in pair mode (refer to

your headset’s user guide).

3 Put your USB adapter into pair mode

by pressing and holding the recessed
Pair button until the USB adapter
flashes red and blue.

Pairing is successful when you hear
“pairing successful” and the USB
adapter LED is solid blue.

Windows

Your USB adapter comes ready to
take calls. If you want to listen to
music, you need to configure your
USB adapter.

1 To configure your USB adapter to play

music, go to Start menu > Control
Panel > Sound > Playback tab. Select
Plantronics BT600, set it as the
Default Device and click OK.

2 To pause music when you place

or receive calls, go to Start
menu > Control Panel > Sound >
Communications tab and select the
desired parameter.

Mac

To configure the USB adapter, go to
Apple menu > System Preferences >
Sound. On both the Input and Output
tabs, select Plantronics BT600.

BT600 Regulatory Compliance Information

้

มีความสอดคลองตามมาตรฐานทางเทคนิค เลขที่.........

”

“

เครื่องโทรคมนาคมและอุปกรณนี้ มีความสอดคลองตามขอกําหนดของ กทช

.”

or

North America

FCC regulatory information

This devi ce complies wit h Part 15 of the FCC Rul es. Operati on is subject
to the foll owing two con ditions: (1) this d evice may not cau se harmful
interfe rence, and (2) this d evice must acc ept any interfer ence receive d,
including interference that may cause undesired operation.
Change s or modificatio ns not expres sly approved by t he party re sponsible
for compli ance could void th e user’s autho rity to oper ate the equipme nt.
Note: This e quipment has bee n tested and fou nd to comply with t he limits
for a Class B d igital device, p ursuant to par t 15 of the FCC Rules. T his
equipmen t complies wit h FCC radiation e xposure limit s set forth fo r an
uncontrolled environment. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipmen t generates, u ses, and can ra diate radio freq uency energ y and,
if not inst alled and used in a ccordance wit h the instruc tions, may ca use
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which ca n be determined b y turning the eq uipment off and o n, the user
is encour aged to try to co rrect the int erference by o ne or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increa se the separ ation betwe en the equipmen t and receiver.
—Conne ct the equipme nt into an outlet o n a circuit diffe rent from that to
which th e receiver is con nected.
—Consult the dealer or an experienced radio/TV technician for help.
This equip ment complies w ith FCC radiati on exposure lim its set fort h for an
uncontrolled environment.

Industry Canada regulatory information

CAN ICES-3 (B)/NM B-3(B)

This devi ce complies wit h Industry C anada licence -exempt RSS s tandard(s).
Operat ion is subject t o the following t wo conditio ns: (1) this device m ay
not caus e interferen ce, and (2) this devi ce must accept any in terference,
includin g interferen ce that may caus e undesired ope ration of the de vice. Le
présen t appareil est co nforme aux CNR d’In dustrie Can ada applicabl es aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditi ons suivantes : ( 1) l’appareil ne doit p as produire de bro uillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.

This equip ment complies w ith IC radiati on exposure lim its set fort h for
an uncontrolled environment. Cet équipement est conforme aux limites
d’exposition de radiation IC énoncés pour un environnement non contrôlé.

Latin America

IFT warn ing when produ ct operates un der the 2.4GHz or 90 0MHz band:
Requisit os de la FCC (secció n 15) y por la IFT NOM-121-SCT I-2009
Su uso está sujeto a las dos condiciones siguientes:

1. Este disp ositivo no pue de causar inte rferencias n ocivas.

2. Este dispositivo debe aceptar todas las interferencias recibidas, incluidas
aquellas q ue puedan caus ar un funcionam iento no dese ado.

Singapore

Complies with
IDA Standards

DA101760

Taiwan

根據NCC低功率管理辦法規定：
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或
使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通 信；
經發現有干擾現象時，應立即停用，並改善至 無干擾時方得繼 續使用。
前項合法通信，指依電信規定作業之無線電通信。低功率射頻電機須忍

受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Thailand

Australia

Phillipines

Europe

Korea

해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된

서비스는 할 수 없습니다

ESD 1511002C