Polsen VCP-2 Product Manual

VCP-2

PASSIVE STEREO

VOLUME CONTROL

PRODUCT

MANUAL

THANK YOU FOR CHOOSING POLSEN.

The Polsen VCP-2 is a passive monitor controller that’s an effective and dependable addition to any pro, project,
or home studio. This monitor controller adjusts the level of the audio signal that travels between a computer
and powered monitors. It offers a convenient way to control the volume of your speakers without accessing
the computer’s or sound card’s volume controls. The VCP-2 is equipped with XLR/TRS combo inputs for
compatibility with a variety of pro and consumer equipment, and it can be used anywhere a separate volume
controller is needed. The passive design will not alter or color the sound originating on your computer or other
device. With its steel housing, the VCP-2 will stand up to constant and demanding use.

PRECAUTIONS

• Please read and follow these instructions, and keep this manual in a safe place.

• Keep this unit away from water and any ammable gases or liquids.

• Clean the unit with only a soft, dry cloth.

• Do not attempt to disassemble or repair the equipment. Doing so will void the warranty, and Polsen will not

be responsible for any damage.

• All images are for illustrative purposes only.

2

OVERVIEW

Front

1. Volume control knob

2. Mute button

Back

3. 1/4 in. TS/TRS outputs

4. XLR/TRS combo inputs

VCP-2 Passive Stereo Volume Control

1.

2.

VCP-2 Passive Stereo Volume Control

3.

4.

3