Polsen SCL-1075 User manual
-1075
SHOTGUN
MICROPHONE
PRODUCT
MANUAL
1
THANK YOU FOR CHOOSING POLSEN.
The Polsen SCL-1075 makes it easier than ever for you to capture
clear, natural audio on your DSLR or camcorder. This cardioid
condenser shotgun microphone attaches to your camera’s shoe
mount or to a boom pole and plugs into the camera’s audio input
jack. A switch allows you to change between normal (cardioid) and
tele (supercardioid) modes, easily altering the microphone’s polar
pattern to capture sound for different environments. Optimized
to reject ambient noise and focus on the subject in front of the
microphone, the SCL-1075 is perfect for run-and-gun productions
like recording interviews and events indoors and in the eld.
SHOTGUN
MICROPHONE
2
SCL-1075
CONTENTS INCLUDE
PRECAUTIONS
• Shotgun Microphone
• Shoe-mount microphone clip
• Boom-pole microphone clip
• Foam windscreen
• AA battery
• Product manual
• Please read and follow these instructions and
keep this manual in a safe place.
• Keep this product away from water and all
ammable gases or liquids.
• Do not attempt to disassemble or repair this
product.
• Handle this product with care.
• Clean this product with only a soft, dry cloth.
• Make sure that this product is intact and that
there are no missing parts.
• All photos are for illustrative purposes only.
3
INSTALLING THE BATTERY
The SCL-1075 runs on a single AA battery. To install a battery, make sure the SCL-1075 is turned
off and follow these steps:
1. Unscrew the base of the microphone and pull it away from the body to uncover the battery
compartment.
2. Insert the battery in the orientation indicated by the illustration inside the compartment.
3. Return the base of the microphone to its original position and screw it back in place.
4
Loading...