0
Bluetooth
"
~:J
...
;
...
I
four phones,
on~
playlist
download the polk
OJ
Stream music sharing app
the party never ends
,
,
,
1
2
important safety instructions
This product was designed and manufactured
to
meet
strict quality
and safety standards. There are, however,
some
installation
and operation precautions
of
which you
should be particularly aware.
1.
Read Instructions. All
the safety and operating instructions
should be read before the system
is
operated.
2.
Retain Instructions. The safety and operating instructions
should be retained for .future reference.
3. Heed Warnings.
All
warnings on the appliances and
in
the
operating instructions should be adhered to.
4.
Follow
Instructions.
All operating and use instructions should
be
followed.
5.
Cleaning. Unplug the appliance from
wall outlet before clean-
ing.
Do
not use
liquid cleaners
or aerosol cleaners.
Use a damp
cloth
for cleaning.
6.
Attachments.
Do
not use attachments not recommended
by the product manufacturer as they may cause hazards.
7.
Water and Moisture.
Do
not use these appliances near water
for example, near a bath tub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool, and
the like.
8.
Accessories. Do not place these appliances on
an
unstable cart, stand, tripod, bracket, or table. The audio/video
products may fall, causing serious
injury
to
a child or adult, and serious damage to
the products. Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer, or sold with
the appliances. Any mounting
of
the appliances should
follow
the manufacturer's instructions, and should use mounting
accessories recommended by the manufacturer.
9.
Ventilation. Slots and openings in the cabinet
are
provided for
ventilation and to ensure reliable
operation
of
the
appliances
and to protect them from overheating, and these openings
must not be blocked or covered. The openings should never
be blocked by placing the products on a bed, sofa, rug, or
other
similar
surface. This product should never be placed
near or over a radiator or heat register. This product should
not be placed
in
a
built-in installation
such
as
a bookcase or
rack unless proper ventilation
is
provided or the manufacturer's
instructions have been adhered to.
1
0.
Power Sources. This product should
be operated only from the
type
of
power source indicated on the marking labels.
If
you
are not sure
of
the type
of
power supply to your home, consult
your appliance dealer
or
local power company.
11. Grounding
or
Polarization. This product is equipped with
polarized alternating-current line plugs {plugs having one blade
wider than the other). This plug
will
fit into the power
outlet
only one way. This is a safety feature.
If
you
are
unable
to
insert the plug
fully
into the outlet, try reversing the plug. If
the
plug should
still
fail to fit, contact your electrician
to
replace
your obsolete outlet. Do not defeat the safety purpose
of
the
polarized plug.
12. Power Cord Protection. Power-supply cord should be routed
so that it is not
likely
to
be
walked
on or pinched by items
placed upon or against it, paying particular attention
to cords
at plugs, convenience receptacles,
,and
the point where they
exit from the appliances.
13. Lightning. For added protection for this audio/video product
during a lightning storm, or when it is left un-attended and
unused for long periods
of
time, unplug it from the wall
outlet
and disconnect the antenna
or
cabM3
system. This
will
prevent
damage to the product due
to
lightning and power-line surges.
14. Power Lines. An outside antenna system
should
not
be
located
in
the vicinity
of
overhead power lines or other electric
light or power circuits, or where it can
fall
into such power lines
or circuits. When
installing
an
outside antenna system, extreme
care should be taken
to
keep from touching such power lines
or circuits as contact with them might be fatal.
15. Overloading. Do not overload
wall
outlets and extension cords
as
this can result
in
a risk
of
fire or electric shock.
16.
Object
and Liquid Entry. Never push objects
of
any kind into
this product through openings, as they may touch dangerous
voltage points or short out parts that could result
in
a fire or
electric shock. Never
spill liquid
of
any kind on this audio/video
product.
17. Servicing. Do not attempt
to
service this product yourself,
as
opening or removing covers may expose you
to
dangerous
voltage or other hazards. Refer all
servicing
to
qualified service
personnel.
18. Damage Requiring Service. Unplug this product from
wall
outlets and refer servicing to qualified service personnel under
the
following
conditions:
a.
When the power supply cord or plug
is
damaged.
b.
If
liquid has been
spilled,
or objects have
fallen into the
product.
c.
If
the product has been exposed to
rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions, as
an
improper
adjustment
of
other controls may result
in
damage and
will often require extensive work by a qualified technician
to
restore the product to its normal operation.
e.
If the product has been dropped or the cabinet has been
damaged.
f.
When the product
~xhibits
a distinct change
in
perfor-
mance this indicates a need for service.
19. Replacement Parts. When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or that the parts have the same
characteristics as the original part. Unauthorized substitutions
may result
in
fire, electric shock or other hazards.
A CAUTION: Danger
of
EXPLOSION if battery is incorrectly
replaced. Replace only with the same
or
equivalent type.
(CR2025)
WARNING: Do not expose batteries or battery pack
to excessive heat such as sunshine, fire or the like.
20. Safety Check. Upon completion
of
any service or repairs
to this product, ask the service technician
to
perform safety
checks to determine that the products are
in
proper operating
condition.
21. Carts and Stands. The appliances should be used only with a
cart or stand that
is
recommended by the manufacturer.
An
appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination
to
overturn. Use caution when
moving the cart/apparatus combination
to
avoid injury from tip-over.
The CAUTION marks shown here are located on the
back of your Polk Hampden computer speaker
A CAUTION:
To
prevent electric shock, match
A wide blade of plug
to
wide slot, insert fully.
a CAUTION: No naked flame sources, such
as
candles, should be placed on the apparatus.
class b emissions limits
This Class B digital apparatus meets all requirements
of
the Canadian Interference-Causing Equipment Regulations.
operation
Operation is subject to the following
two
conditions:
1)
This device may
not
cause interference, and
2)
This device must accept any interference, including interference that may cause undesired operation
of
the device.
note: This equipment has been tested and found
to
comply
with the limits for a Class B digital device, pursuant to
part 15
of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in
a
residential installation. This equipment generates, uses
and can radiate radio frequency energy, and, if not installed
and used
in
accordance with the instructions, may cause
harmful interference
to
radio communications. However, there
is
no guarantee that interference will not occur
in
a particular
installation.lf this equipment does cause harmful interference
to ,radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to
try
to
correct the interference by one
~(more
of the following
measures: Reorient or relocate the receiving antenna. Increase
the separation between the equipment and receiver. Connect
the equipment into
an
outlet on a circuit different from that
to
which the receiver
is
connected. Consult the dealer or
an
experienced radio/TV technician for help.
• The antenna(s) used for this transmitter must be installed
to
provide a separation distance
of
at least 20 em from
all persons and must not be co-located or operating
in
conjunction with any other antenna or transmitter.
• Changes or modifications not expressly approved
by
the party
responsible for compliance could void the user's authority
to
operate the equipment.
product disposal
Certain international, national and/or local
)l
laws and/or regulations may apply regarding
the disposal
of
this product. For further detailed
information, please contact the retailer where -
you purchased this product or the Polk Importer/
Distributor
in
your country. A listing
of
Polk Audio
Importer/Distributors can be found on the Polk website
www.polkaudio.com or by contacting Polk Audio at:
5601
Metro Drive, Baltimore, Maryland 21215, USA.
Phone: + 1-41 0-358-3600;
in
California: 1-800-377-7655.
3
0
.o
0 -
..
polk
polk
0
,
,
left
right
what's
in
the box
opolk
1 .
two
powered desktop speakers
(hookup in
a
active/passive configuration)
'
2. 8'speaker cable with euro-style connectors
3. 8'
USB
cable
4. External power supply with detachable cable
5. User guide with online registration
4
,
connecting
~
your
speakers
. . .
Note: Euro-style connectors
enable you to run longer
or
shorter
cable lengths.
To
lengthen
or
shorten
your
cable,
pull
back
the
cable boot, then loosen the four
conductor
retaining screws.
Remove the existing
cable
and
replace
with cable
of
an
appropriate length.
Tighten the
retaining screws.
For the best audio
performance, use
the USB connection
active
computer
hook
ups
"' "' "'
<(
••
~~~~[i)llilll
t t
AUX USB
(not supplied)
,
passive
(
'
euro-style connectors
external
power
supply
5
6
0
polk
controls
0
Vol+
Volon/otf
On/Off-
Turn
the
wheel
counterclockwise
(up)
to turn the speakers on; turn the
wheel clockwise
(down)
to turn the speakers off.
Note:
The
first time you turn on the Hampden, the
USB
source
is selected.
After that initial selection, the Hampden
will
turn on
in
the last source selected when the speaker was
last turned off.
input source LED
colors
'
....
Source
Select-
Press
to
change sources.
If
the source is USB, the next source
is
Bluetooth. If the
source
is
Bluetooth,
pr.essing the source button
will
disconnect the active Bluetooth
device, and the
Hampden
will
go into
"connect"
mode.
0
Bluetooth
- Blue
0
USB-
White
[J
AUX-
Amber
,
,
Power
Saving Mode
(Sleep)
-When
the speaker has been in
"standby"
for 20
minutes, with no action
and no source active, the speaker enters into power saving mode
(Sleep).
Slow pulsing
White
LED,
USB source is
in
"sleep."
Slow pulsing blue
LED,
Bluetooth source is in
"sleep."
7
8
Bluetooth® operation
Select Bluetooth as the source, and the following sequence occurs until a connection
is
completed:
/
1.
The speaker attempts
to
connect
to
the last connected Bluetooth device.
2.
The speaker enters "discovery mode" and
is
available to pair and/or connect to any Bluetooth
device. (After 20 minutes, the system goes i(lto sleep mode.)
3.
Regardless of the active source (other than Bluetooth), the speaker will always be
in
discovery
mode and ready to connect to any previously
pain~d
device while the system
is
on.
Note:
When
you pair/select Bluetooth from a Bluetooth device, the loudspeakers will go into
Bluetooth source even though another source
(USB,
AUX) has been selected.
Note:
The
last connected Bluetooth device connects when Bluetooth source
is
selected.
Whenever Bluetooth
is
connected, the Bluetooth source
LED
is solid Blue;
and there will be
an
ascending tone.
The loudspeakers will disconnect and enter into "discovery mode" for 20 minutes when any
of
the
following occur:
1.
Press and release the source button.
2.
The Bluetooth source device disconnects.
When Bluetooth is disconnected:
a)
When the speaker
·disconnects,
there will be a descending tone.
b)
When the speaker disconnects, the
LED
will brighten for two seconds, remain steady bright for two
seconds, then dim for two seconds then repeat this sequence.
"
c)
Pressing the source button on the speaker
will
switch the source to Aux
ln. ,
d)
When the speaker wakes from sleep mode, and it's
in
Bluetooth source mode, but the Bluetooth
device is disconnected, the speaker
will
go into discovery mode.
9
limited five year warranty
Polk
Audio,
Inc.,
warrants
to
the original retail purchaser only. This warranty
will
terminate automatically prior to its
stated expiration if the original retail purchaser
sells
or transfers the product
to
any other party.
Polk
Audio,
Inc.,
warrants, to the original retail purchaser only, that the
LOUDSPEAKER(S), CROSSOVER
COMPONENT(S)
and ENCLOSURE
on this
Polk
Audio Loudspeaker Product will be free from defects in material
and workmanship for a period
of
five
(5)
years from the date
of
original retail purchase from a
Polk
Audio Authorized
Dealer. Furthermore, Polk
Audio,
Inc.,
warrants,
to
the original retail purchaser only, that any AMPLIFIER OR
OTHER
ELECTRONIC COMPONENT that may be included
in
this
Polk
Loudspeaker
Product will
be free from defects
/
in
material and workmanship for a period
of
two
(2)
year from the date
of
original retail purchase from a
Polk
Authorized Dealer.
To
allow Polk
to offer the best possible warranty
servic~,
please register your new product on
lin~
at:
www.polkaudio.com/registration
or
call Polk
customer service 800-377-7655
in the USA and
Canada (outside the
USA:
41
0-358-3600)
within ten
(1
0)
days
of
the date
of
original purchase. Be sure
to
keep your original purchase
receipt. Defective Products
must be shipped, together with proof of purchase, prepaid insured
to
the
Polk
Authorized
Dealer from whom you purchased the
Product,
or
to the Factory at 1 Viper
Way,
Vista, California
92081. Products
must be shipped
in
the original shipping container or its equivalent;
in
any case the risk
of
loss or damage in transit is
to
be borne by you.
If upon examination at the Factory or
Polk
Audio Authorized Dealer it is determined that the unit was defective
in
materials or workmanship at any time during this Warranty period,
Polk
or the Polk Authorized Dealer
will, at its option,
repair
or
replace this
Product
at no additional charge, except as set forth below.
All
replaced parts and
Products
become the property of
Polk. Products replaced or repaired under this warranty will be returned
to
you, within a
reasonable time, freight prepaid.
This warranty does not include service
or
parts
to
repair damage caused by accident, disaster, misuse, abuse,
negligence, inadequate packing or shipping procedures, commercial use, voltage inputs
in
excess
of
the
rated maximum
of
the unit, cosmetic appearance
of
cabinetry not directly attributable
to
defect
in
materials or
" workmanship, or service, repair,
or
modification
of
the
Product
which has not
been authorized or approved by Polk.
10
This warranty shall terminate if the Serial number on the
Product
has been removed, tampered with or defaced.
This warranty is
in
lieu
of
all
other expressed Warranties.
If
this
Product
is
defective
in
materials or workmanship as
warranted above, your sole remedy
shall
be repair or replacement
as
provided above.
In
no event will Polk Audio,
Inc.
be
liable
to you
fo'r
any incidental
or
consequential
damages arising out of the use or
inability
to use the
Product,
even
if
Polk
Audio, Inc.
or a
Polk
Authorized
Dealer
has been advised of the
possibility
of
such damages, or for any claim
by any other party.
Some states do not
allow
.the
exclusion
or
limitation
of
consequential
damages, so the above
limitation and exclusion
may not
apply
to you.
All
implied warranties
on
this Product
are
limited
to the duration of this expressed Warranty.
Some states do not
allow limitation on how
long
an
implied Warranty lasts,
so the above
limitations
may not
apply
to
you. This Warranty gives you specific
legal
rights, and you
also
may have other rights which vary from state to state.
/
This Warranty
applies only
to
Products
purchased
in
Canada, the United States of America, its possessions, and
U.S. and
NATO
armed forces exchanges and audio
clubs. The Warranty
terms and conditions
applicable
to
Products
purchased
in
other countries
are
available from the
Polk
Authorized Distributors
in
such countries.
11
polk
.
register
your
new
polk
product
online
now
for
a chance
to
win
$500
of
polk
product!
Your Product
Model
and
Serial
Number Can be found
on the bo
ttom
of your hampden. Enter this number
in the
"Serial
Number" space when registering your
product online.
Have your
Model
and Serial
Number
hand y
for reference when
calling
Po
lk Customer
Service.
Become a valued
member
of
the
Polk Family
and get a chance
to
win
FREE Speakers. Registering your new product:
www.polkaudio.com/registration/
•
Creates a permanent record
of
your purchase,
in
case you
misplace
your
original
receipt.
• Enters you
in
our
monthly
FREE
drawing for
$500-worth
of
Polk speakers.
• Allows
you to
enroll
in
Club Polk:
for informative
Polk
Website
Forums, special
discounts in the Polk
Web Store, advance notice
of
Polk
Promos, and discounts on Authorized
Polk
parts.
•
Keeps you
up
to date when there is news and announcements about your product.
No
Internet
access? Call Polk
Customer Service
800-377-7655 (US
& Canada
only).
Outside the US
&Canada,
call 410-358-3600. We'll walk
you through the simple
registration process!
We
take
your privacy seriously.
Polk
does
not
share
or
sell
information to any other parties, unless
directed by court order.
Registering your product has no effect on your warranty. Warranties
apply
as stated
in
your product
manual. Please
be sure to keep your original purchase receipt.
Questions? Concerns? Contact
Polk
Customer Service 9am
- 5:30pm,
M-F, EST
(USA) 800-377-7655 US
& Canada only
I
41
0-358-3600 outside US
& Canada
I
polkcs@polkaudio.com
Loading...