Polk Audio EX3 Series, EX3 COMPTSYS, EX3500, EX3550, EX3560 Owner's Manual

POLK AUDIO

5601 METRO DRIVE

BALTIMORE, MARYLAND 21215

[phone]

http://www.polkaudio.com

“Polk Audio” and “The Speaker Specialists” are

trademarks of Britannia Investment Corporation used

under license by Polk Audio Incorporated.

EX3 Series

Tweeter & Component
Speaker Systems

the speaker specialists

®

32

GETTING STARTED

Please inspect each loudspeaker carefully. Notify your Polk Audio dealer if you notice any damage or
missing items. Keep the carton and packing material. They will do the best job of protecting your
speakers if they need to be transported. Check that you have the following model-specific parts:

EX3550 and EX3560 Models:

• 2 Mid-Woofers

• 2 Mid-Woofer Grilles

• 2 EX3500 Tweeters With Wires Attached

• 2 Crossover Networks

• 2 Flush Mount Tweeter Cups

• 2 Flush Mount Cup Clamps

• 2 Straight Surface Mount Tweeter Cups

• 2 Angled Surface Mount Tweeter Cups

• Speaker Wires With Fast-on Connectors Attached

• 2 Machine Screws For Flush Mount Installation

• 16 Sheet Metal Screws For Surface Mount Tweeter Installation (4),
Crossover Mounting (4) & Driver Mounting (8).

• 12 Speed Nuts (8 Driver Mount, 4 Surface Mount)

• 2 Elliptical Lens Assemblies

• 2 Tweeter Grilles

• Driver Mounting Template (Separate Sheet)

• Registration Card

EX3500:

• 2 EX3500 Tweeters With Crossover & Wires & Connectors Attached

• 2 Flush Mount Tweeter Cups

• 2 Flush Mount Cup Clamps

• 2 Straight Surface Mount Tweeter Cups

• 2 Angled Surface Mount Tweeter Cups

• 2 Machine Screws For Flush Mount Installation

• 4 Sheet Metal Screws For Surface Mount Installation

• 4 Speed Nuts For Surface Mount Installation

• 2 Elliptical Lens Assemblies

• 2 Tweeter Grilles

• Registration Card

ATTACH YOUR RECEIPT

HERE AND FILE FOR

FUTURE REFERENCE

X

For more info and accessories, visit www.polkaudio.comContact Polk Customer Service: 800-377-7655 [e-mail]

Contact Polk Customer Service: 800-377-7655 [e-mail]

INSTALLING EX3 SERIES COMPONENTS

EX3 Series Crossovers

You will need to make wiring connections from your amp or radio to the crossovers and from the
crossovers to your mid/woofers and tweeters [figure 1]. Choose crossover box locations that are
convenient for making these connections. We do not recommend placing the crossover

inside of door panels due to the increased potential for water damage and
interference with internal door and window mechanisms.

To install the Crossover, squeeze the terminal end of the “hood” and lift it up (like a classic sports car
hood, natch) to expose the mounting screw holes [figure 2]. Use the included crossover mounting
screws to secure the crossover in your chosen location. You may want to mark the holes with an
indelible ink marker and pre-drill your screw holes for easy installation. Be careful not to drill or
screw through any important mechanical devices in your car.

54

Installing car speakers is a serious project. If you have any doubts about your ability to execute any
of the installation steps found in this manual, save yourself a lot of grief and contact a professional
installer. Your Polk Audio dealer is a good place to find one. If you intend to do the installation
yourself we assume you possess some skill in the proper use of hand and power tools. No matter
how much installation experience you have, we recommend that you…

• Read this manual thoroughly before you begin

• Plan your installation carefully

• Allow enough time to complete the installation without rushing

• Take steps to protect your car and upholstery from unwanted scratches and punctures

NECESSARY TOOLS

• Phillips head screwdriver

• Flat blade screwdriver or putty knife

• Door panel pry-tool (available at most auto parts supply stores)

• Electric drill

• 3/16" and 1/8" drill bits

• Hole saw of appropriate diameter for the speaker size (for “new location” and
flush mount tweeter installation only)

• Indelible ink marker for marking the cutout (for “new location” installation only)

• Metal file

• Solderless, crimp-on connectors and a crimping tool

• Safety glasses

• Wire strippers and cutters

NOTE: For EX3500 installation, please jump to page 8 now.

For more info and accessories, visit www.polkaudio.com

99.1

RADIO

AMP

(OPTIONAL)

CROSSOVER

EX3500 TWEETER

MIDRANGE

FIG. 1

FIG. 2