Page 1
A
B
S
O
L
U
T
E
Z
E
R
O
®
Innovative shipping and
packaging solutions by
Instruction Manual
D
R
Y
I
C
E
S
N
O
W
M
A
K
E
R
Polar Tech Industries, Inc. • 1-800-ICE-BRIX • www.polar-tech.com
Page 2
Absolute Zero® Dry Ice Snow Maker
Installation Instructions
1
2
3
4
5
Connect female end of hose to snow maker.
(Ensure connection is tight)
Connect male end of hose to brass tee.
(Ensure connection is tight)
Insert washer into tank connector.
Connect tank connector to “liquid”
outlet on CO
Open tank valve 1/2 to 3/4 of a turn
Fill container with snow.
6
Page 3
4
5
Connect tank connector to “liquid”
outlet on CO
2
tank.
Open tank valve 1/2 to 3/4 of a turn
Fill container with snow.
6
Page 4
A
Polar Tech Industries, Inc.
1-800-ICE-BRIX
www.polar-tech.com
Copyright © 2013 Polar Tech Industries, Inc.
Innovative shipping and
packaging solutions by
• Dry Ice is extremely cold (–109.3° F, –78.5° C) and, if not
properly handled, can cause severe cold burns and frostbite.
• Do not touch Dry Ice with bare hands, use heavy insulated
gloves. Rubber and plastic gloves do not provide
adequate protection.
• Use protective eyewear when making or handling Dry Ice.
• Dry Ice is not edible. Do not put Dry Ice in your mouth and
do not allow anyone else to do so.
• Keep Dry Ice out of the reach of children and animals.
• Do not put Dry Ice in any tightly closed container.
• Do not add Dry Ice to any liquid or any liquid to Dry Ice.
• Make and use Dry Ice only in a well-ventilated area.
• Before operating the Dry Ice Snow Maker, make sure all tank
and hose connections are tight. All connections must be
tightened with a wrench.
• Consult your CO
2
tank supplier about recommended
procedures for proper tank installation, storage and operation.
Polar Tech Industries, Inc. • 1-800-ICE-BRIX • www.polar-tech.com
Loading...