STREET PHOTO
NightCam
600 Night Camera Operation Manual
1. 600 Night Camera Components List
A. Flash Unit
B. Viewfinder
C. Close up Lens
hten / Darken control
D. Li
E. Shutter Release Nut
F. Time Exposure Control Sw
G. Shutter Button
H. Shutter + Flash Button
I. Film Door Latch
J. Tripod Nut
itch
of 3
1
1. Supplementary Operation Instructions
In addition to your Instruction Manual that comes with this camera, this is a
supplementary operation instruction/reference guide for “Night” or “Low Light” instant
photography.
600 NightCam Camera is specially designed to capture the night scene for Street
Photography application. However, other than the added long-exposure feature for
night photography, all the functions remain the same as a normal 636 instant camera.
In normal or daylight photography, the “Time Exposure Control Switch “ should be set
at “0” and please refer to the “Operation Manual” that comes with the camera.
For night photography, please see the below instruction/reference guide.
2. Night Photography
2.1 The setting of the “Time Exposure Control Switch” varies and is determined by the
ambient lighting (amount of light/brightness) condition of the background scene.
The darker the background, the longer the exposure time required. The camera has
a range of “Exposure Times” from 0.5 to 8.0 seconds controlled/adjusted by the
“Time Exposure Control Switch” illustrated as below.
Exposure Time Setting Chart
0 Normal 5 2.0 seconds
1 0.5 seconds 6 3.0 seconds
2 0.75 seconds 7 4.0 seconds
3 1.0 second 8 6.0 seconds
4 1.5 seconds 9 8.0 seconds
2.2 When the camera is operating at long exposure time
• It is advisable to fix your camera on the tripod to avoid any unnecessary
motion/vibration of your camera.
• It is also advisable to use cable release, attached to “E” – Shutter release nut.
2.3 Frame your subject through the Viewfinder
2.4 Press the shutter release cable button to take picture.
of 3
2