Polaroid Light Lock Instruction

Light Lock Close-Up Lens

The Polaroid Light Lock Non-Contacting Close-Up Lens fits all Polaroid Spectra cameras. The lens lets you take photographs at 10 inches (25.4cm) without making contact with the object being photographed.

The lens attaches easily and securely to the front of the camera and lets you take pictures that are 50 percent the size of the actual object (1/2 to 1).

There are two ways to focus with the lens (a). One is a system of triangulating lights that form a single spot when the camera is at the correct focus distance. Because the single spot is in the center of your picture, you do not need to look through the viewfinder to frame your picture. The other focusing method is a built-in 10-inch measuring cord.

To attach the lens

1 Open the camera. (Follow camera instructions.)

2 Grasp the lens at the word "Polaroid." Fit the attachment

over the camera lens by placing the bottom of the battery compartment onto the top of the camera.

As you attach

the lens, avoid touching the lenses or lights.

3 Swing the

bottom of the attachment in toward the camera lens (b) until it snaps in place.

Note: Always remove the lens before attempting to close

the camera.

To remove the lens

Grasp the lens at the word "Polaroid" and gently pull forward, tilting the top of the lens down (c).

As you remove the lens, avoid touching the lenses or lights.

Choosing a focus method

You can focus accurately in either of two ways. For noncontact focusing, use the triangulating lights. In brightly lit areas where the focusing lights are not clearly visible, use the measuring cord.

Using the triangulating lights

1 Press the light-activating

button on top of the close-up lens to turn on the focusing lights (d). The button activates the lights for about 15 seconds.

2 Position the camera so the

two light beams form a single spot on the subject (e)

While positioning the camera,

you do not need to look through the viewfinder. The

light defines the center of the area being photographed.

3 When the green flash-ready

light on the camera is on, press the shutter button to take the picture.

Using the measuring cord

1 Hold the camera with your left hand.

2 Grasp the rubber knob

attached to the measuring cord.

3 Pull the measuring cord all the

way out, as far as it will go. Place the rubber knob against the object being photographed (f). Release the cord without moving the camera forward or backward.

4 Frame the picture in the view-

finder and press the shutter button.

Tips for best results

● Some parts of an object more than 2 inches (5cm) deep may not appear in sharp focus.

● When using the measuring cord, do not move the camera backward or forward. Use a tripod whenever possible.

● Photograph objects with reflective surfaces at an angle to avoid flash reflection or find suitable lighting (sunlight, for

example) and turn the flash off.

Page 1

To install batteries

The focusing lights on the close-up lens require two alkaline AA batteries for operation. Replace the batteries when the focusing lights become dim.

Note: Use only alkaline batteries.

1 Open the battery compartment

door.

2 Install the batteries as shown

in the compartment (g).

3 Close the door and snap it into

place.

Care and handling

● When not using the close-up lens, keep it clean and protected.

● Avoid touching any of the lenses. If you need to remove dust or fingerprints from the lenses, breathe on them and wipe gently with a soft, clean facial tissue. Do not use

silicone treated eyeglass tissues.

Call us toll free

If you have questions about using the Light Lock NonContacting Close-Up Lens, call us toll free: 1-800-343-5000 from anywhere in the U.S.A., Monday - Friday, 8 a.m. to 8 p.m., Eastern time. In Canada, call 1-800-268-2970, Monday Friday, 9 a.m. to 5 p.m., Eastern time.

Full one-year warranty

If your Light Lock Non-Contacting Close-Up Lens proves to be defective within the warranty period, we will, without charge, either repair it or, at our option, replace it with a fully reconditioned lens.

The warranty period is one year from the original date of purchase. To verify the warranty period, you should keep the sales slip or other proof of the purchase date. Without this information, the warranty period will be determined by the manufacturing date on the product.

The repair or replacement of your Light Lock Non-Contacting Close-Up Lens is guaranteed for the remaining warranty period on your original lens.

The warranty does not cover damage caused by accident, misuse, or tampering with the lens, and a charge will be made for such repairs.

For warranty service, the lens must be returned to and repaired by a Polaroid Service Center or Authorized Service Center in the U.S.A. or Canada. You can return the lens through your Polaroid dealer. If that is not convenient, call us toll free in the U.S.A. at 1-800-343-5000. In Canada, call 1-800-268-6970.

U.S.A.: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty excludes all consequential damages. Some states do not allow the exclusion of consequential damages, so the foregoing exclusion may not apply to you.

Canada: This warranty excludes all consequential damages and does not affect your statutory rights.

"Polaroid", "Spectra" and "Light Lock" are trademarks of Polaroid Corporation.

All other product names may be trademarks of their respective owners.

Page 2