Digital Photo Picture Frame
User’s Manual
Important Safety Instructions
caution: These servicing instructions are for use by qualied service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that contained in the
operating instructions unless you are qualied to do so.
Note: Do not touch the color TFT LCD screen by hand directly.
Proper Handling of the Digital Photo Picture Frame
Always handle the Digital Photo Picture Frame carefully. Avoid touching the LCD screen as
natural skin oils are very difcult to remove.
Always position the Digital Photo Picture Frame on a stable and level surface. Unstable
surfaces can cause the Digital Photo Picture Frame to topple and fall, resulting in possible
damage or injury.
Avoid exposing the Digital Photo Picture Frame to direct sunlight or high temperatures, which
can damage or shorten its life. Do not place the unit near heat sources such as radiators, heat
registers, or other appliances that generate heat. Orient the Digital Photo Picture Frame away
from direct sunlight to reduce glare.
Avoid exposing the Digital Photo Picture Frame to rain, water, moisture or high humidity. Do not
place it in a bathroom or kitchen near a sink or where it may come in contact with water.
Never place heavy or sharp objects on the LCD panel, frame, or power cord.
Overloading Outlets
Do not overload electrical power sources when using the Digital Photo Picture Frame.
Overloading wall outlets, circuits, or extension cords can result in overheating, re, or electric
shock. Use only grounded or polarized outlets.
Power Cord Protection
To minimize wear on the power supply cord, the power supply cord should be routed away
from foot trafc and contact with other objects. Do not route the power cord under rugs or
carpeting. The cord should never be severely bent, pinched, or twisted. Periodically inspect
the power cord and each end of the cord for wear or damage. Unplug and replace the cord if
it is damaged.
Ventilation
Slots and openings on the Digital Photo Picture Frame are provided for ventilation purposes. To
ensure reliable operation of the product and to protect it from overheating, these openings must
not be blocked or covered. Increased temperatures may cause re or device failure.
To assure proper ventilation, do not block the openings by placing the Digital Photo Picture
Frame on a bed, sofa, rug or other similar surface. Do not place it in an enclosed space such
as a bookcase, unless proper ventilation is provided.
1
Controls and Basic Instructions
CONGRATULATIONS on your purchase of a Polaroid Digital Photo Picture Frame. Please
read carefully and follow all instructions in the manual and those marked on the product before
rst use. Failing to follow these warnings could result in personal injury or damage to the device.
Also, remember to keep this User’s Manual in a convenient location for future reference.
Important: Save the original box and all packing material for future shipping needs.
Controls
Secure Digital™, Multi
Media Card™, Memory
Stick™,
Memory Stick Duo™
USB Host Port
for USB Flash Drives
AC Power Input
Play
Up
Brightness Control
Control Buttons
Power Switch
Adjustable Base
Down
Exit
2