Polaroid 3211-TLXB User Manual

32” HD Widescreen LCD Television

3211-TLXB

Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions.

For service, support and warranty information, visit www.polaroid.com.

This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. To ﬁ nd out how to properly dispose of this product, please go to www.polaroid.com and click on “Company“ or call the customer service number for your country listed in the instruction manual.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Conﬁ dential unpublished works. © 1992 -1997 Dolby Laboratories, Inc. All rights reserved.

This TV incorporates High-Deﬁ nition Multimedia Interface (HDMITM) technology. HDMI, the HDMI logo and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

FCC

Federal Communications

Commission Statement

This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient/Relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit which is different from what the receiver is connected to.

4. Consult the dealer or an experienced radio/TV technician for help.

Changes or modi cations not expressly approved by the manufacturer responsible for compliance could void the user authority to operate the equipment.

ENGLISHENGLISH

Warnings and Precautions

To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference.

This symbol is intended to alert the user to avoid the risk of electric shock.

WARNING

CAUTION

This equipment must not be disassembled by anyone except qualiﬁ ed service personnel.

This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

To reduce the risk of ﬁ re or electric shock, do not expose this equipment to rain or moisture.

▪ TO REDUCE THE RISK OF ELECTRIC SHOCK, ▪ DO NOT REMOVE COVER (OR BACK). ▪ NO USER-SERVICEABLE PARTS INSIDE. ▪ REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Use of controls, adjustments or performance of procedures other than those speciﬁ ed herein may result in hazardous radiation exposure.

Important Safety Instructions

This symbol indicates caution points.

This symbol indicates actions that should not be done.

This symbol indicates actions that must be performed.

▪ Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc.

The equipment may fall, causing serious injury to children or adults and serious damage to the equipment itself.

▪ Use only a cart or stand recommended by the manufacturer. This equipment and

recommended cart or stand should be handled with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart/stand to overturn.

▪ Do not disable the 3-wire grounding type plug. The grounding pin on the 3-prong plug is an

important feature. Removing the grounding pin will increase the risk of damaging the equipment.

▪ If you can not ﬁ t the plug into the electrical outlet, contact an electrician to install a grounding

outlet.

▪ Always operate this equipment from the type of power source indicated on the rear of the

serial/model plate.

▪ Never overload wall outlets and extensions.

Warnings and Precautions

▪ Use and handle the power cord with care. Do not place any heavy objects on the AC

power cord.

▪ Do not pull the AC power cord. Do not handle the AC power cord with a wet hand. ▪ Do not touch the power cord and antenna cable during lightning.

▪ Remove the plug from the wall outlet, if the equipment will not be used for a long period

of time.

▪ Do not place, use or handle this equipment near water. ▪ Never expose the equipment to liquid, rain, or moisture.

Seek for service if any of the above is spilled into the equipment. ▪ Do not expose the equipment to extreme temperature or to direct sunlight, as the

equipment may heat up and suffer damage.

▪ Do not install the equipment near any heat sources such as radiators, heat registers,

stoves, or any other apparatus that might produce heat.

▪ Do not attempt to service the equipment yourself. ▪ Opening and removing the covers may expose you to dangerous voltage or other

hazards and may void your warranty. Refer service to qualiﬁ ed personnel.

▪ Do not place or drop any other objects on top. ▪ Do not insert anything into the ventilation holes of your equipment.

Inserting any metal or ﬂ ammable objects may result to ﬁ re or electric shock. ▪ Protect the power cord from being walked on or pinchrd particularly at plugs ,convenience

receptacles, and the point where they exit from the apparatus.

▪ Do not place the equipment on uneven or unstable carts, stands, tables, shelves etc. The

equipment may fall, causing serious injury to children or adults and serious damage to the equipment itself.

Always place the equipment on the ﬂ oor or on a surface that is sturdy, level, stable and

strong enough to support the weight of the equipment.

▪ Do not block any ventilating openings. Leave an open space around the equipment. Never place the equipment : on a bed, sofa, rug, or any other similar surfaces; too close to drapes/curtains/walls, in a

bookcase, built-in cabinet, or any other similar places that may cause poor ventilation.

▪ Unplug this apparatus during lightning storms or when unused for long periods of time. ▪ Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

▪ Always remove the power cord from the outlet before cleaning the equipment. ▪ Never use liquid or aerosol cleaners on the equipment.

Clean only with a soft dry cloth.

ENGLISHENGLISH

▪ Only use attachments/accessories specified by the manufacturer.

Warnings and Precautions

Outdoor Antenna Safety Instructions

If an outdoor antenna is connected, follow the precautions below:

▪ An outdoor antenna should not be located in any area where it could come in contact with

overhead power lines, or any other electric light or power circuits.

▪ When installing an outdoor antenna system, extreme caution should be taken to prevent

contact with power lines. Direct contact with power lines may be fatal and should be avoided at all costs.

Section 810 of National Electrical Code (NEC) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Antenna lead-in wire

Ground clamps

Electric service equipment

EXAMPLE OF OUTDOOR ANTENNA GROUNDING

Ground clamps

Power service grounding (NEC Art250 part H)

NEC : National Electrical code

Antenna discharge unit (NEC section 810-20)

Grounding conductors (NEC section 810-20)

TABLE OF CONTENTS

Federal Communications Commission Statement .......................... 3

Warnings and Precautions

Important Safety Instructions .......................................................................................4

Antenna Safety Instructions ......................................................................................... 6

Chapter 1 Introducing the LCD TV

Key Features ...............................................................................................................8

Package Contents .......................................................................................................9

Setting Up Your LCD TV .............................................................................................11

Your LCD TV .............................................................................................................. 13

Your Remote Control .................................................................................................15

Chapter 2 Installing the LCD TV

Connecting a TV Cable or an Antenna ......................................................................17

Connecting a VCR .....................................................................................................22

Connecting a Video Camera or Game Console ........................................................23

Connecting a DVD Player .......................................................................................... 24

Connecting a Digital TV Cable Box or Digital Satellite Receiver ............................... 26

Connecting an AV Equipment with HDMI Connector ................................................. 27

Connecting an AV Equipment with DVI Connector ....................................................28

Connecting a PC........................................................................................................ 29

Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System........................30

ENGLISHENGLISH

Chapter 3 USING THE FEATURES

Wide Screen Viewing ...................................................................................................................................31

Operating the Menu ..................................................................................................................................... 32

Customizing the VIDEO Settings ...........................................................................................................34

Customizing the AUDIO Settings ...........................................................................................................36

Customizing the TV Settings ....................................................................................................................38

Customizing the SETUP Settings .........................................................................................................40

Using the Program Block Settings ........................................................................................................ 43

Using the Program Guide ..........................................................................................................................48

Speciﬁ cations ........................................................................................................ 49

Programming your Remote Control

......................................................... 50

Chapter 1 Introducing the LCD TV

Key Features

Various Audio/Video terminals for external equipment connection

▪ 2 sets of composite A/V input terminals ▪ 1 set of S-VIDEO terminals ▪ 2 sets of component Video input terminals ▪ 1 VGA/ Audio input terminals ▪ 2 HDMI/Audio input terminals ▪ 1 set of Audio(L/R) output terminals ▪ 2 SPDIF output terminals (Optical x 1 /Coaxial x 1) ▪ 1 Headphone terminal

The built-in TV tuner to receive HD ATSC

▪ This function allows the reception of HD broadcasting without the addition of a set top

box.

High De nition Multimedia Interface (HDMI)

▪ High Deﬁ nition Multimedia Interface (HDMI) is a small, user-friendly interconnect that

can carry up to 5 Gbps of combined video and audio in a single cable. This system eliminates the cost, complexity and confusion of multiple cables used to connect current A/V systems.

HDTV Component Video Inputs

▪ Offers the best video quality for DVD(1080i, 720p) and digital set-top-box (1080i, 720p)

connections.

3D Digital Noise Reduction

▪ This function can digitally reduce image noise to provide better picture quality.

Film-Mode Detection (3:2 Reverse Pull Down)

▪ This function can automatically detect content derived from ﬁ lm and adjust the

interlacer’s frame matching to provide a more natural-looking, clearer image of the moving picture.

Package Contents

DVR

Chapter 1 Introducing the LCD TV

Make sure all of the following contents are included.

 LCD TV

 VIDEO Cable Remote Control/

AAA Batteries x 2

SET UP

CAB/

AUXDVD

SAT

SLEEP

DVD MENU

PAGE

VOL CH

LAST

MUTE

ASPECT

LIVE TV

PIP

GUIDE

EXIT

INFO

DVR

ABC

DEF

JKL6MNO

GHI

WXYZ

PQRS

TUV

INPUT

ENTER

 Power Cord

 AUDIO Cable  Warranty Card

ENGLISH

 Bottom Stand / Screw Driver and Screws 4

 Component Cable

 User’s Manual

 Quick Start Guide

 Remote control Guide Stand Assembly Guide

These items are all you need to set up and operate the LCD TV in its basic conﬁ guration.

Make sure all of the above contents are included in the package. If you are missing any items, please contact the Polaroid customer service department.

Chapter 1 Introducing the LCD TV

Setting Up Your LCD TV

How to install the TV Stand

Read all instructions before continuing with the stand installation.

Attach the Stand the TV with the bottom foam packaging material still attached.

a. Lift foam packaging material from the top of the LCD out of the box. b. Lift LCD out of the box, with the bottom foam packaging material still attached, and place

onto a stable surface.

a b

Stand

Shipping box

c. Remove protective bag from LCD unit, but DO NOT remove the bottom foam packaging

material from the TV.

d. Locate the place on the back of the TV to attach the stand. Secure the stand to the LCD

with all four screws.

Protective bag

Table

Unit

Tab le

Stand

Packaging material

Unit

Screws

Stand

Table

Packaging material

Chapter 1 Introducing the LCD TV

How to remove the TV Stand

If you prefer to mount your new Polaroid TV on a wall instead of attaching it to the stand, please reference the instructions included in the wall mounting kit (sold separately).

Verify your TV’s model and be sure to use the wall mounting kit speciﬁ ed for your TV model only. Contact a qualiﬁ ed technician for assistance when installing the wall mounting kit.

 To prevent damaging the surface of the LCD TV, place the TV on a soft cloth.

Soft cloth

 Remove the screws of the table stand and detach the table stand from the TV.

ENGLISH

Soft cloth

Table stand

 Align the holes on the wall mounting hook units with the corresponding holes on the rear

of the TV and fasten four screws.

4 screws (supplied with the wall mount kit)

Wall mounting hook unit (supplied with the wall mount kit)

Soft cloth

Chapter 1 Introducing the LCD TV

How to setup the TV

 Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal

(refer to page15-17).

 Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.

 Insert the 2 batteries supplied in remote control.

Step1 Slide the back cover up to open the

battery compartment of the remote control.

Step2 Insert two AAA size batteries.

Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.

Slide the cover back into place.

Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner etc.) on the remote, as it may su er damage.

 Connect other an external AV device (refer to page19-27).

Your LCD TV

Chapter 1 Introducing the LCD TV

Front/Right Side View and Controls

VOLUME

Adjusts the volume up and down. Selects the main-menu item and change values for items when in the OSD mode.

LED

The LED light indicates when the LCD TV is activated.

VIDEO1 IN

VIDEO

Connects to the composite Video and Audio output jacks on external video equipment.

ENGLISH

Infrared Receiver

CHANNEL▲▼

Scans up and down through channels. Selects sub-menu item when in the OSD mode.

Press once to display the OSD (on screen display), press again to turn the OSD off.

INPUT

Chooses from different input signal sources.

Turns the LCD TV on and into standby mode.

VIDEO1 IN

HEADPHONE

Connects to the external headphone for private listening.

Chapter 1 Introducing the LCD TV

Rear View and Jacks

VIDEO2 IN

Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment.

HDMI1 IN/HDMI2 IN

Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced, high-deﬁ nition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for DVI connection.

S-VIDEO IN

Connects to the S-VIDEO and AUDIO(L/R) output jacks on external video equipment.

VGA IN

Connects the PC, or other AV equipment with VGA and AUDIO(L/R) output jacks.

HDMI 1 INHDMI 2 IN

AUDIO

VIDEO AUDIO

VIDEO2 IN

YPbPr1 IN/YPbPr2 IN

Connects to the DVD player, Digital Set-Top-Box, or other AV equipment with component(YPbPr) video and audio output jacks.

AUDIO OUT-STEREO

Connects to the AUDIO(L/R) input jacks on AV equipment.

VGA IN

AUDIO

LR LR

S-VIDEO AUDIO

S-VIDEO IN

AUDIO OUT-DIGITAL-OPTICAL/COAXIAL

Connects to the DIGITAL AUDIO jack on the digital/standard 5.1 audio system.

YPbPr1 IN

YPbPr AUDIO

YPbPr

YPbPr2 IN

TV CABLE/AIR

Connects RF input from VHF/UHF antenna or cable to receive high/standard deﬁ nition television.

AC IN

Connects to the AC power cord.

AUDIO

STEREO

AUDIO OUT

DIGITAL

OPTICAL

COAXIAL

HDTV/TV

Air/CABLE

VHF/UHF IN

DVR

Your Remote Control

Chapter 1 Introducing the LCD TV

This package includes a Polaroid remote that enables control of up to four devices. To select a device, simply select one of the following device mode controls: TV, CBL/SAT, DVD/VCR, or AUDIO.

Turns the LCD TV on and off

SET UP

CAB/

SAT

SLEEP

DVD MENU

AUXDVD

SET UP Remote control universal code setup.

For more information on setting up your remote control, please see the “Programming Your Remote Control” section(refer to page47)

TV Controls this LCD TV

CAB/SAT Controls Cable Converter or Satellite

Receiver

DVD Controls DVD player or Video player

AUX Controls Audio Ampliﬁ er

SLEEP Cycles through the LCD TV sleep time:

OFF/30/60/90/120 mins

LIVE TV

PIP

PAGE

LAST

VOL CH

MUTE

ASPECT

GUIDE

  ► Other device function keys

INFO

GHI

PQRS

INPUT

ABC

JKL6MNO

TUV

ENTER

EXIT

DEF

WXYZ

   

VOL+- Increases and decreases volume

CH▲▼ Change channel up and down

ASPECT Cycles through Wide mode settings:

NORMAL/FULL/WIDE/ZOOM

ENGLISH

MUTE Pressing once mutes audio. Pressing

again restores audio

LAST Returns to previously selected channel

GUIDE In TV mode, pressing GUIDE displays

the Program Guide on the screen

Chapter 1 Introducing the LCD TV

DVR

SET UP

CAB/

SAT

SLEEP

DVD MENU

VOL CH

MUTE

ASPECT

LIVE TV

PIP

GUIDE

INFO

ABC

JKL6MNO

GHI

PQRS

INPUT

TUV

ENTER

AUXDVD

LAST

EXIT

DEF

WXYZ

PIP PIP function is not available. Only for

other devices function.

MENU Displays the OSD menu on the

screen.

◄ ►▲▼,OK Cycles through OSD options and selects

individual menu items. OK conﬁ rms option

settings

OK In TV mode, pressing OK to display a channel list

PAGE

INFO Displays information on the LCD TV

screen such as input source, channel,

CC Cycles through the Closed Caption:

 Analog Closed Caption:OFF/CC1/

program title.

CC2/CC3/CC4/Text1/Text2/Text3/

Test4  Digital Closed Caption: Service1/Service2/Service3/Service4/

Service5/Service6/OFF

EXIT Exits the OSD menu

0-9/ENTER Pressing a number selects a channel.

Following selection, pressing ENTER activates the channel, or channel activates automatically in 3 seconds

INPUT Pressing INPUT to display a source list,

use ▲▼buttons to select the video equipment connected to the video inputs of your LCD TV: TV/VIDEO1/ VIDEO2/VIDEO3/VIDEO4/VIDEO5/ VIDEO6/VIDEO7/COMPUTER

▪ In TV mode, use with 0-9 and ENTER

buttons to select a digital channels

E ective range: The remote can control the LCD TV from up to 5m away, if pointed directly at the receiver.

Chapter 2 Installing the LCD TV

Refer to the owner’s manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed.

Connecting a TV Cable or an Antenna

Antenna Connection

The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems.

■ A 75-ohm system is generally a round cable (not included) with F-

type connector that can easily be attached to a terminal without tools.

F-type connector

75-ohm coaxial cable (round)

■ A 300- ohm system is a  at twin-lead cable (not included) that can

be attached to a 75-ohm terminal through a 300-75-ohm adapter (not included).

ENGLISH

Chapter 2 Installing the LCD TV

Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. B: Shows how to use a separate VHF and/or UHF outdoor antenna.

A. Combination VHF/UHF antenna

VHF/UHF Antenna

300-ohm twinlead cable

300/75-ohm adapter (not included)

B. Separate VHF and/or UHF antennas

75-ohm coaxial cable

VHF/UHF Antenna

UHF Antenna

Combiner (not included)

OUT

300-ohm twinlead cable

75-ohm coaxial cable

300-ohm twinlead cable

VHF Antenna

Chapter 2 Installing the LCD TV

Cable TV (CATV) Connection

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, speciﬁ es that the cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible. Use of this TV for other than private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcast/cable company, and/ or program owner.

■ A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, connec t the 75-

ohm cable into the ANT. terminal.

■ Some cable TV companies o er premium pay channels. Since the

signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.

This converter/descrambler is necessary for normal viewing of scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more speciﬁ c instructions on installing cable TV, consult your cable TV company. One possible method of connecting the converter/descrambler provided by your cable TV company is shown in the diagram below.

RF switch (not included)

2 set signal splitter (not included)

Cable TV Line

OUT

ENGLISH

Cable TV converter/ descrambler

VHF/UHF IN

(not included)

■ The RF switch (not included) is required to provide two inputs (A and B). Setting

the RF switch to position A allows viewing of all unscrambled channels by using the TV channel keys.

■ Setting the RF switch to position B allows viewing of all scrambled channels via the converter/descrambler by using the converter channel keys.

Chapter 2 Installing the LCD TV

 Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal.

HDTV/TV

Air/CABLE

VHF/UHF IN

 Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.

HDTV/TV

Air/CABLE

VHF/UHF IN

This TV is equipped with a safety fuse. In the event of an electrical storm or power outage the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by prying the cover off, following the illustration below. If the fuse is blown, visit your local hardware store and ask for a 4A 250V - 5x20mm Time Lag Fuse (Slow Blow) to replace the fuse.

Firm Plastic Prying Tool

(Using a metal tool may cause shock)

4A 250V

Back of TV

BE SURE TO UNPLUG AC POWER CORD BEFORE REMOVING THE FUSE.

5x20mm

Fuse

 Press the button on the remote to turn on the LCD TV.

Always disconnect the LCD TV from the main voltage when the LCD TV will not be used for a long period of time. The POWER button on the front panel is only used for switching the LCD TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket.

+ 44 hidden pages