Polarlite LLC-06-001, LLC-06-002, LLC-06-003, LLC-06-004 User guide
Indoors
Lightchain
Warm LEDs 80 with USB
LLC-06-001
Warm LEDs 40 with USB
LLC-06-002
Cool LEDs 80 with USB
LLC-06-003
Cool LEDs 40 with USB
LLC-06-004
Intended use
The product is intended for decorational purposes indoors. For
example it is suitable for attaching to appropriate furniture or
along windows. Operate the product via suitable USB power
supply only.
For safety and approval purposes (CE), you must not rebuild and/
or modify this product. If you use the product for purposes other
than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep
them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European
requirements. All company names and product names are
trademarks of their respective owners. All rights reserved.
Delivery content
•USB Lightchain
•Operating instructions
Safety instructions
Read the operating instructions carefully and especially
observe the safety information. If you do not follow the
safety instructions and information on proper handling
in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
a) Persons / Product
•The device is not a toy. Keep it out of the reach of children and
pets.
•Do not leave packaging material lying around carelessly. These
may become dangerous playing material for children.
•Do not electrically attach this light chain to another light chain.
•Always check the product for damages before use. Should you
discover any damage, cease use of the product.
•Protect the product from extreme temperatures, direct sunlight,
strong jolts, high humidity, moisture, flammable gases, vapours
and solvents.
•Do not place the product under any mechanical stress.
•If it is no longer possible to operate the product safely, take it
out of operation and protect it from any accidental use. Safe
operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient
conditions or
– has been subjected to any serious transport-related stresses.
•Please handle the product carefully. Jolts, impacts or a fall even
from a low height can damage the product.
•The LED heats up during use. Keep the product away from
highly combustible materials while operating.
•When setting up the product, make sure that the cable is not
pinched, kinked or damaged by sharp edges.
•Always lay the cables so that nobody can trip over or become
entangled in them. This poses a risk of injury.
•This product is designed to be used indoors only.
•Attention, LED light:
– Do not look directly into the LED light!
– Do not look into the beam directly or with optical instruments!
•When used in conjunction with other devices, observe the
operating instructions and safety notices of connected devices.
b) Miscellaneous
•Consult an expert when in doubt about operation, safety or
connection of the device.
•Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
•If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.
Operating instructions
Product overview Operation
LLC-06-001
LLC-06-002
LLC-06-003
LLC-06-004
0.5 m
0.5 m
0.5 m
0.5 m
8.4 m
10 cm
4.4 m
10 cm
8.4 m
10 cm
4.4 m
10 cm
Do not set up or operate the product under water.
Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.
Do not connect the product to the power supply while
it is still in the packaging. Lay the product out entirely
before connecting it to the power supply.
Do not hang any objects from the product and do not
cover the product.
The LEDs are neither dimmable nor replaceable.
1. Lay the product out entirely and arrange the cables so that
they lie freely and are not tangled.
2. Attach the product to a suitable mounting site (e.g. a piece
of furniture). Where necessary use plastic cable ties to secure
the product.
3. Connect the USB-A plug to an available USB port of a USB
power supply (e.g. computer, USB power adapter, etc.). The
USB power supply must support the required power input
(see “Technical data”).
4. The LEDs light up after plugging in.
5. To switch o the product, disconnect the USB connection.
The product is not equipped with its own on/o switch and is
therefore always switched on as long as the USB power
supply is connected.
Maintenance and cleaning
•The product is maintenance-free apart from occasional
cleaning.
•Disconnect the USB connection before cleaning and let the
LEDs cool down suciently.
•To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water.
•Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute
to the protection of the environment.
Technical data
Item No. LLC-06-001 LLC-06-002
Operating voltage 5 V/DC (via USB)
Power consumption 3.84 W 1.92 W
Current consumption 0.33 A 0.17 A
Number of lights 80 40
Luminous colour Warm White Warm White
Power cable length 0.5 m 0.5 m
Total length 8.4 m 4.4 m
Distance between lights 10 cm 10 cm
Operating conditions -20 to +70 °C / 20 – 80 % RH
Storage conditions -20 to +70 °C / 20 – 80 % RH
Weight 140 g 78 g
Item No. LLC-06-003 LLC-06-004
Operating voltage 5 V/DC (via USB)
Power consumption 3.84 W 1.92 W
Current consumption 0.33 A 0.17 A
Number of lights 80 40
Luminous colour Cool White Cool White
Power cable length 0.5 m 0.5 m
Total length 8.4 m 4.4 m
Distance between lights 10 cm 10 cm
Operating conditions -20 to +70 °C / 20 – 80 % RH
Storage conditions -20 to +70 °C / 20 – 80 % RH
Weight 140 g 78 g
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions
reflect the current technical specifications at time of print.
© Copyright 2015 by CEI Conrad Electronic International (HK) Limited
distributed by Conrad Electronic SE,
Klaus-Conrad-Str. 1, D-92240 Hirschau
LLC-06-001-002-003-004_v2_0715_02_m_EN(1)
Loading...