Polarlite 1678778 User guide

Indoors

Battery Operated
Lightchain

Chain of spherical lights
with20LEDs, WW

Item no. 1678778

Intended use

The product is battery-operated and intended for use as indoor
decoration (batteries not included).

For safety and approval purposes, you must not rebuild and/or
modify this product. Using the product for purposes other than
those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit or fire.
Read the instructions carefully and store them in a safe place.
Make this product available to third parties only together with its
operating instructions.

This product complies with statutory national and European
regulations. All company and product names are trademarks of
their respective owners. All rights reserved.

Delivery content

• Chain of spherical lights with 20 LEDs, WW

• Operating Instructions

Safety instructions

Read the operating instructions and safety information
carefully. If you do not follow the safety instructions
and information on proper handling in this manual, we
assume no liability for any resulting personal injury
or damage to property. Such cases will invalidate the
warranty/guarantee.

a) Persons / Product

• This product is not a toy. Keep it out of the reach of children
and pets.

• Do not leave packaging material lying around carelessly, as it
may become dangerous playing material for children.

• Do not electrically attach this light chain to another light chain.

• Check the product for damage before each use. If there are any
signs of damage, discontinue use immediately.

• Protect the product from extreme temperatures, direct sunlight,
strong jolts, high humidity, moisture, flammable gases, vapours
and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, stop
using it and prevent unauthorized use. Safe operation can no
longer be guaranteed if the product:

– is visibly damaged,

– is no longer working properly,

– has been stored for extended periods in poor ambient

conditions or

– has been subjected to any serious transport-related stress.

• Always handle the product carefully. Jolts, impacts or a fall even
from a low height may damage the product.

• The LED becomes warm during use. Keep the product away
from flammable materials.

• When setting up the product, make sure that the cable is not
pinched, kinked or damaged by sharp edges.

• Always lay the cables so that nobody can trip over or become
entangled in them. This poses a risk of injury.

• This product is intended for indoor use only.

• Warning, LED light:

– Do not look directly at the LED light!

– Do not look into the beam directly or with optical instruments!

b) Battery

• Ensure that the battery is inserted in the correct polarity.

• To prevent battery leakage, remove the battery when you do
not plan to use the product for an extended period. Leaking or
damaged batteries may cause acid burns when they come into
contact with skin. Always use protective gloves when handling
damaged batteries.

• Keep batteries out of the reach of children. Do not leave
batteries lying around, as they constitute a choking hazard for
children and pets.

• Replace all batteries at the same time. Mixing old and new
batteries may cause the batteries to leak and damage the
lantern.

• Batteries must not be dismantled, short-circuited or thrown into
fire. Never recharge non-rechargeable batteries, as this may
cause an explosion.

c) Miscellaneous

• Maintenance, modifications and repairs must be done by a
technician or an authorized repair center.

• If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.

Operating Instructions

Product overview

1.9 m0.2 m

Operation

Do not set up or operate the product under water.

Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.

Do not operate the product if it is still in its packaging.
Lay the product out entirely.

Do not hang any objects from the product and do not
cover the product.

The LEDs are neither dimmable nor replaceable.

1. Lay the product out entirely and arrange the cables so that
they lie freely and are not tangled.

2. Remove the cover of the battery box.

3. Insert two new AA batteries. We recommend using high­quality batteries. Observe the correct polarity (“+” = positive,
“-“ = negative), as stated on the battery box.

4. Reattach the cover.

5. Mount the product in a suitable place (e.g. on furniture).
Where necessary use plastic cable ties to secure the product.

6. You can switch the product on/o by the on/o switch on
the battery box (ON = on; OFF = o).

7. If you are not using the product for an extended period,
switch it o and remove the batteries from the battery box.

A change of batteries is necessary if the LEDs of the light
chain are no longer coming on.

Care and cleaning

• The product is maintenance-free, except for any change of

batteries and occasional cleaning.

• Swtich o the product and remove the batteries before

cleaning and let the LEDs cool down completely.

• To clean, use a clean, dry, lint-free cloth. For stubborn dirt,

slightly dampen the cloth with water. Allow the product to dry
completely before continued use.

Disposal

a) Product

Electronic devices are recyclable waste and must not
be placed in household waste. Always dispose of the
product according to the relevant statutory regulations.

Remove any inserted batteries and dispose of them
separately from the product.

b) Batteries

You as the end user are required by law (Battery
Ordinance) to return all used batteries. Disposing of
them in the household waste is prohibited.

Batteries that contain hazardous substances are labelled with
this symbol to indicate that disposal in household waste is
forbidden. The abbreviations for heavy metals in batteries are: Cd
= Cadmium, Hg = Mercury, Pb = Lead (indicated on the battery,
e.g. below the waste icon on the left).

Used batteries can be returned to local collection points, our
stores or battery retailers.

You thus fulfil your statutory obligations and contribute to the
protection of the environment.

Technical data

Protection type IP20

Operating voltage 3 V (2 x 1.5 V batteries, type AA)

Power consumption 0.06 W

Number of lights 20

Battery life approx. 168 hours

Luminous colour Warm white

Power cable length 20 cm

Total length 2.1 m

Distance between lights 10 cm

Operating conditions 0 to +40 °C, 0 – 90 % RH

Storage conditions 0 to +40 °C, 0 – 90 % RH

Weight approx. 144 g

These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method (e.g. photocopying, microfilming, or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. These operating
instructions reflect the current technical specifications at the time of printing.

© Copyright 2018 by CEI Conrad Electronic International (HK) Limited

Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau 1678778_V2_1018_02_mxs_m_en