Indoors
Decorative Chain
LED chain of lights
with10bulbs, CW
Item no. 1678777
Operating Instructions
Intended use
The product is intended for use as indoor decoration.
For safety and approval purposes, you must not rebuild and/or
modify this product. Using the product for purposes other than
those described above may damage the product. In addition,
improper use can cause hazards such as short circuit, fire, electric
shock, etc. Read the instructions carefully and store them in
a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with statutory national and European
regulations. All company and product names are trademarks of
their respective owners. All rights reserved.
Delivery content
• LED chain of lights with 10 bulbs, CW
• Operating Instructions
Safety instructions
Read the operating instructions and safety information
carefully. If you do not follow the safety instructions
and information on proper handling in this manual, we
assume no liability for any resulting personal injury
or damage to property. Such cases will invalidate the
warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and
pets.
• Do not leave packaging material lying around carelessly. These
may become dangerous playing material for children.
• Always check the product for damages before use. Should
you discover any damage, cease use of the product. If you
discover damages while the product is in use (i.e. damaged
cable or plug), do not touch the product, risk of fatal injury due
to electric shock! First disconnect the mains outlet to which
the product is connected from the power supply (flip o the
fuse and/or automatic circuit breaker and then turn o the
residual current-operated circuit breaker to disconnect the
power outlet at all phases). Now unplug from the power outlet.
Discontinue use of the product immediately, dispose of it in an
environmentally friendly fashion.
• Protect the product from extreme temperatures, strong jolts,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it
out of operation and protect it from any accidental use. Safe
operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient
conditions or
– has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even
from a low height can damage the product.
• The LEDs get hot during use. Keep the product away from
easily flammable materials when in use.
• The product generates heat during use. Do not cover the
product during use.
• The mains outlet must be located near to the device and be
easily accessible.
• The transformer may be supplied with power only via a properly
installed power outlet connected to the public supply mains.
Before plugging in the transformer, verify that the product’s
nominal voltage complies with the voltage of your power supply
company.
• Never plug in or unplug with wet hands.
• Do not unplug the transformer by tugging on the cord, grasp
and pull the power plug using the provided gripping surface.
• When setting up the product, make sure that the cables are not
pinched, kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become
entangled in them. This poses a risk of injury.
• Unplug the product in case of a thunder storm for safety
reasons.
• The product is intended for use in indoor areas only.
• Attention, LED light:
– Do not look directly into the LED light!
– Do not look into the beam directly or with optical instruments.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or
connection of the device.
• Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.
Product overview
5 m
2.7 m
Operation
Do not install or operate the product under water.
Make sure the cable hangs loosely and is not overly
tensioned. Failure to heed this warning may cause the
cable to tear.
Do not connect the product to the power supply while
it is still in the packaging. Lay the product out entirely
before connecting it to the power supply.
Do not hang any objects from the product and do not
cover the product.
Disconnect the product from the mains power outlet if
any of the LEDs are not working properly.
The LEDs are neither dimmable nor replaceable.
1. Lay the product out entirely and arrange the cables so that
they lie freely and are not tangled.
2. Attach the product to a suitable mounting site (e.g. on a
piece of furniture). Where necessary use plastic cable ties to
secure the product.
3. Connect the plug of the power cable to the socket on the
transformer. It is only possible to connect in one way. Secure
the connection by turning the plug’s screw cap onto the
transformer’s thread.
4. Connect the transformer to a power outlet.
5. Disconnect the transformer from the power outlet for
extended periods of disuse.
The product has no power switch and is always on as long as
it is connected to the power supply.
Care and cleaning
• The product is maintenance-free apart from occasional
cleaning.
• Disconnect the transformer from the power supply before
cleaning and allow the LEDs to cool down suciently.
• To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water.
• Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not be
placed in household waste. At the end of its service life,
dispose of the product in accordance with applicable
regulatory guidelines.
You thus fulfil your statutory obligations and contribute
to the protection of the environment.
Technical data
a) Light chain
Operating voltage ............................... 100 – 240 V/AC, 50 – 60 Hz
Power consumption ........................... 0.015 W
Protection type .................................... IP20
Number of LEDs .................................. 50
Luminous color ..................................... cold white
Power cable length ............................ 5 m
Total length ............................................ 7.7 m (with extension cable)
Distance between lights .................. 30 cm
Operating conditions ........................ 0 to +40 °C, 0 – 90% RH
Storage conditions ............................. 0 to +40 °C, 0 – 90% RH
Bulb diameter ....................................... Ø 6 cm
Weight ...................................................... 260 g
b) Transformer
Input voltage ......................................... 100 – 240 V, 50 – 60 Hz
Output voltage ..................................... 3 V/DC
Output current ..................................... 300 mA
Output power ....................................... max. 0.9 W
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method (e.g. photocopying, microfilming, or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. These operating
instructions reflect the current technical specifications at the time of printing.
© Copyright 2018 by CEI Conrad Electronic International (HK) Limited
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau 1678777_V2_1118_02_mxs_m_en
Loading...