Polaris INDY 700 XC SP User Manual

2000 OWNER’S MANUAL SUPPLEMENT INDY 700 XC SP PN 9915377
IMPORTANT: This is a supplement to your owner’s manual. This information should remain with your owner’s
manual at all times.
Specifications
CAPACITIES AND DIMENSIONS ENGINE AND COOLING FEATURES
Rider Capacity 1
Coolant Capacity (qts.) 3 Bore x Stroke (mm) 81 x 68 Low Oil Indicator Std
Chaincase Oil Capacity (oz.)
Dry Weight (Est.) 490 Carburetor/Throttle Body Keihin Speedometer Std
Fuel Tank Capacity (Gallons)
Gearcase Oil Capacity (oz.)
Height (in.) 45 Pilot Jet 38 Wear Strips Std
Length (in.) 109 Jet Needle R1368G-3
Oil Capacity (Quarts) 3 Needle Jet 2.9 mm Fixed
Ski Center Distance (in.) 42.5 Cutaway 5.5
Width (in.) 48 Air Screw 1.5
Brake Type Liquid Cooled
Drive Clutch Center Distance
Clutch Type P-85 Cylinders 2
Track Length 121 Ignition Timing 12° @ 3000
Track Width 15 Ignition Type Ducati
Drive Chain Length 70p Oil Injection Standard
Reverse Transmission Accessory Spark Plug N57YC
Sprocket Ratio 24:70
9oz. Displacement 701 Parking Brake Std
12 Carburetor Model PWK 39 Tachometer Std
Not Applicable Main Jet PTO 190
Polaris HPB
12.5 Cooling Liquid
Engine Model # S70-70-00A1 Electronic Fuel Gauge Not Avail
Alternater Output 280 Electric Start Acc
Easy Throttle Acc
MAG 195
Paint Codes
Idle RPM ¦ 200 1500
Color Description
Indy Red
Polaris “P” No.
P293
Raw Material No.
8520297
Paints can be ordered
direct from Midwest
Industrial Coatings
(612-934-8252). Mix
as directed.
SUSPENSION LIGHTS
Front Type XC-10, CRC Headlight Type Halogen
IFS Shocks/Spring Adj. Fox IFP/
Threaded
Rear Type XTRA 10 Indicator Lights Oil-Brake/Temp/
Front Torque Arm Limiter Quick Adjust Thumbwarmer Std Hi/Lo
Rear Torque Arm Limiter
Front Track Shock Fox IFP
Rear Track Shock Fox PS
Quick Adjust Handwarmer Std Multi-range
Headlight (watts) Voltage
1
100/60
Hi Beam
2000 700 XC SP Engine Model: S70-70-00A1
Altitude
Meters
(Feet)
AMBIENT
TEMPERA-
TURE
0-900
(0-3000)
900-1800
(3000-6000)
1800-2700
(6000-9000)
2700-3700
(9000-12000)
Below -20°F Below -29°C
PTO 205
MAG 210
PTO 185
MAG 190
PTO 165
MAG 170
PTO 145
MAG 150
-20°Fto +10°
-29°Cto
-12°C
PTO 190
MAG 195
PTO 175
MAG 180
PTO 155
MAG 160
PTO 140
MAG 145
+10°F-+40°F
-12°C-+5°C
PTO 180 MAG 185
PTO 160 MAG 165
PTO 145 MAG 150
PTO 130 MAG 135
- Shaded zone should drop Jet Needle one position (raise E-Clip)
- Production Setting
PN 9915377 Rev 01 2/99
Printed in U.S.A.
Above +40°F
Above +5°C
PTO 165 MAG 170
PTO 150 MAG 155
PTO 135 MAG 140
PTO 120 MAG 125
2
Loading...