HANDLEBAR MAP BAG KIT
P/N 2882824
APPLICATION
Verify accessory fitment at Polaris.com.
BEFORE YOU BEGIN
Read these instructions and check to be sure all parts and tools are accounted for.
Please retain these installation instructions for future reference and parts ordering
information.
KIT CONTENTS
This Kit includes:
REF QTY PART DESCRIPTION PART NUMBER
1 1 Handlebar Map Bag 2687805
1 Instructions 9927981
TOOLS REQUIRED
None
IMPORTANT
Your Handlebar Map Bag Kit is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
Instr 9927981 Rev 01 2017-06 Page 1 of 3
ASSEMBLY TIME
Approximately 12 minutes
NOTE
Additional time may be required for optional steps, or
to accommodate other installed accessories.
INSTALLATION INSTRUCTIONS
TRAIL PERFORMANCE MODELS
1. Install as shown.
WARNING
DO NOT wrap hook and loop fastener straps around
brake line or throttle cable when installing. Failure to
comply will adversely affect the throttle and brake
mechanisms and may lead to severe injury or death
in an accident.
(Step 1 Cont’d.)
RMK®®MODELS
1. Install as shown.
WARNING
DO NOT wrap hook and loop fastener straps around
brake line or throttle cable when installing. Failure to
comply will adversely affect the throttle and brake
mechanisms and may lead to severe injury or death
in an accident.
Instr 9927981 Rev 01 2017-06 Page 2 of 3
FEEDBACK FORM
A feedback form has been created for the installer to provide any comments, questions
or concerns about the installation instructions. The form is viewable on mobile devices
by scanning the QR code or by clicking HERE if viewing on a PC.
FEEDBACK FORM
Instr 9927981 Rev 01 2017-06 Page 3 of 3
Loading...