Tab E10B
Quick Start Guide
2
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to
exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the
U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting
at the specified power level in different channels.
The highest SAR value for the device as reported to the FCC is 0.747 W/kg for 2.4G; and 1.136 W/kg for 5G when placed next to
the body.
Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
CE mark. Declaring compliance to all the applicable European Union (EU) directives.
In the European Union, this symbol indicates that this product including battery must not be disposed of with
household waste. It is your responsibility to hand it over to a designated collection point for the recycling of waste
electrical and electronic equipment. For more information, please contact your local waste collection center or the
point of purchase of this product.
ENGLISH
3
Be sure to keep the power cord away from
younger children
Please ensure the user understand the following:
• As with all electrical products, precautions should be observed during handling and use to prevent electric shock.
The power supply (adapter) should not be handled by the children.”
• The tablet, power supply, battery pack or power cord should not be dropped, crushed, stepped on or otherwise abused.
• Ensure the user understand the safe and proper handling of power cord and power supply. Misuse could result in serious injury.
• The user should periodically inspect the tablet; power supply and power cord for damage and replace it, if necessary.
• Do not leave the tablet plugged in or “on” when enclosed in a non-vented container, such as a backpack,
as overheating may occur.
• It is recommended that user should take a 5-minute break every 30 minutes of use.
Safety Precautions
The followings are the precautions for environments while using the product:
1. Do not place near the fire or other sources of heat.
2. Do not expose to magnetic fields.
3. Do not expose to direct sunlight.
4. Do not expose to rain or moisture.
5. Do not place heavy objects to add heavy pressure on the tablet.
6. Do not drop the tablet.
4
Package contents
One tablet with one stylus One AC adapter
One USB type-C cable One USB 2.0 cable (optional)
This guide Bluetooth Keyboard (optional)
Carefully unpack your box and take out the items listed below. If any of the items are missing or damaged, please contact your
dealer immediately:
ENGLISH
5
Tablet layout
Front & Left
1
Touchscreen
2
Front facing camera
3
Volume up/down
4
I/O cabinet
1 2
3
4
6
ENGLISH
Back / Top side
5
Rear facing camera
6
Power lock button
7
Stylus hole
8
Stylus
9
Speaker
5
6
7
9
8
7
Left
10 11 12 13 14 15
10
Micro HDMI port
11
Audio combo jack
12
Micro USB port
13
Micro SIM card slot
14
Speaker
15
Micro SD card slot
Charging your tablet
If your tablet is just being unpacked from the box, you need to charge the tablet first.
It will take around 4 to 5 hours to be fully charged.
1. Plug the micro USB head of the cable into the micro-USB port on your tablet.
2. Plug the adapter into a wall-socket.
Powering ON/OFF your tablet
To power on your tablet: Press and hold the power button down until the screen turn on.
To power off your tablet: To turn off your tablet, follow these steps:
1. Press and hold the Power Lock button.
2. Touch Power off from the menu.
3. Touch OK to power down your tablet.
1.
Plug the micro USB head of the cable into the micro-USB port on your tablet.
2.
Plug the adapter into a wall-socket.
8
ENGLISH
Inserting a storage card
Your tablet supports micro-SD cards with maximum storage space up to 32G.
You can insert the micro SD card and pull it out without powering down the tablet.
To do so, follow the steps below.
Install your Micro SD Card
1. Hold your tablet with front side up.
2. Insert your micro SD card in the direction as shown.
Remove your Micro SD Card
1. Push and release the micro SD card. This will unlock the card.
2. Pull out the micro SD card.
Processor
Intel Cherry Trail Quad-core T3 Z8300/Z8350 1.44GHz
(Max. CPU Burst Frequency #1.84GHZ)
Memory
Default 4GB, LPDDR3
Storage
Default 32GB, up to 128GB, eMMC v5.0
Wireless
• Wi-Fi 802.11 ac 2x2
• Bluetooth 4.0
• 3G (optional)
LCD
10.1-inch IPS LCD
Resolution: 1920 x 1200 pixels
Touchscreen
10-point multi-touch
Capacitive multi-touch support
Stylus
Active EMR pen
Cameras
• Front: 2M
• Rear: 5M
Battery
Li-polymer 7500 mAh
Input/Output
1 x micro-USB 2.0 (type C), 1 x micro-USB 2.0, 1 x audio combo jack, 1 x micro HDMI port, 1 x micro SIM
card slot, 1 x micro-SD card slot (32G max)
Speaker & Mic
• Build-in Speaker x 2
• Internal digital MIC x 1
AC-Adapter
• DC Output: 5V/3A/15 Watt
• Input Voltage: 100 - 240VAC
• Input Frequency: 47 - 63Hz
Dimension (mm)
260.96(W) x 176.98(H) x 9.8(D)
Weight
0.6 kg (including stylus)
Specifications
9
Art.-No. 81569
V 1.0 / 11-2017
All rights reserved. © EXTRA Computer GmbH
Brühlstr. 12
89537 Giengen-Sachsenhausen
Deutschland / Germany
Loading...