Page 1
INTERCOM HEADSET w/CONDENSER MIC | USER GUIDE
AUDIO
CMi
headsets
Model # CM-i5
WHAT’S INCLUDED
CM-CASE
Premium Headset
Storage Case, Orange
SCAN ME
for VIDEO GUIDE
U.S. Pat: 9,271,065
CM-WSN
Windscreen
CM-HSi
Headband Sizer
POINT-SOURCEAUDIO.COM/SUPPORT
CM-BCP
Belt-clip for
XLR connector
Failure to observe proper use
of this product could result in
voiding your warranty.
6-ETP
Ear-tips (small,
med, large)
© 2019 Point Source Audio. All rights
reserved. The Point Source Audio logo is a
registered trademark of Point Source Audio.
Register Your Warranty:
Page 2
CM-i5 | INTERCOM HEADSET WITH CONDENSER MIC
FITTING YOUR HEADSET
To size the headset for a tighter
fi t, attach the CM-HSi headband
to the interior of the headframe
and snap to frame on both sides.
Headband
Sizer
SECURING YOUR BOOM MIC
When adjusting your boom microphone,
always secure the mic to the headset
by aligning the arrow with the circle to
“lock” the mic into position. DO NOT force
the boom past this point as it may cause
damage to your microphone over time.
Line up the
symbols to
lock the boom
into place.
SWITCHING INTERCOM SYSTEMS
Your headset can be conveniently adapted
to work with different intercom systems or
even your smart phone. Visit our accessories
page online for cross compatibility options.
STORING YOUR HEADSET
1
Gently place the headset into
the base of the case.
2
Coil the cable around your
headset until you reach the
end of the cable.
Register Your Warranty: POINT-SOURCEAUDIO.COM/SUPPORT
Loading...