PO FUNG ELECTRONIC DMV1 User Manual

OWNER’S MANUAL

用户手册 DMR Digital Radio

To users:

Thank you for your favor with our products.

We are dedicated to providing high performance and high stability radio communication products. This two-way radio is

no exception. The radio is a DMR dual-slot digital walkie-talkie developed and produced by my team with 1024 memory

channels, 800 memory Contact Person. In order to make you fully understand the various advantages of the radio

performance and use and maintenance methods, please read this manual carefully.

OWNER’S MANUAL

用户手册 DMR Digital Radio

主要功能特点 Main Features

⚫ UHF Full-Frequency Radio

Frequency range:UHF400.000-470.000MHz

⚫ DMO True2-Slot dual time slot

Direct mode dual-slot communication achieves two groups of calls at a frequency point at the same time, so that the communication efficiency is doubled and frequency resources are saved

⚫ Digital and analog compatible

Support DMR digital and analog two communication modes to ensure that the original analog products smooth transition to digital products to meet different communication needs

⚫ Digital signaling function

Rich calling modes that support DMR protocol, including single call, group call and all call; supports remote inhibit function and other applications

⚫ High sound quality

This digital two-way radio uses advanced AMBE +2TM voice processing technology to achieve high quality

⚫ High/low power switch

2W/0.5W power switch, Meets the power requirements of different call distances to save more energy

⚫ Alarm function

Supports general alarm and silent alarm in emergency situations

⚫ Digital mode supports the use of repeater ⚫ Side buttons can be customized without changing the user’s operating habits ⚫ Customization function: GPS and Digital Audio Record

OWNER’S MANUAL

用户手册 DMR Digital Radio

一．熟悉本机 Familiar with this Product

1.按键介绍 Description of Buttons

[PTT] Transmit button

Switch between transmission and reception; when transmitting, press this button and speak to the microphone; release the button to receive.

Side button SK1

Short press to turn on the monitor function (only support analog channels).Press this key to switch to monitor mode and press it again to return to receiving mode.

Long press to transmit power switching,Switching between high power and low power.

Side button SK2

Short press shortcut select zone.

VOX on/off

Top button

*The default is alarm Key

Short press to end the emergency alarm mode

Long press this button to open the emergency alarm mode.

2.可编程键 Programmable Buttons

In order to improve the operational convenience, the function shortcut keys provided by this product are 【SK1】 key, 【SK2】 key, 【TK1】 key, . For the specific function, please consult the distributor. For the detailed description of each function, please refer to the corresponding contents of "Function and Operation".

No.

Shortcut name

Purpose

None

No function is assigned to the preset button.

Transmit power

Quickly switch between high power and low power.

Emergency mode on

Quickly establish an emergency call. This is the recommended option for the orange button.

Emergency mode off

Quickly end an emergency call initiated outward.

offline

Quickly switch between repeater mode and offline mode.

Encryption on/off

Quickly turn on/off encryption for channel (only for digital mode).

VOX

Quickly turn on or off the VOX function.

One-touch calling

Quickly call key, After pressing the button to call, send the corresponding call, message or other application functions.

Contacts

Press this key to enter the digital contact list and initiate a call or call related functions

Zone increases

Press this key to switch to the previous zone。

Zone decrease

Press this key to switch to the next zone。

Zone switching

Quickly select the zone, allowing the user to switch between two zone.

Keyboard lock

Quickly lock the numeric keyboard. (PTT keys are not included)

Monitor

Quickly turn on or off the monitor function.

Battery power indication

Quickly access to battery power. The user can check the battery status by voice prompt.

Scan on / off

Quickly turn the scan function on or off.

Recording switch

(Based on firmware) Quickly turn the recording on or off.

OWNER’S MANUAL

用户手册 DMR Digital Radio

playback of last recordings

(Based on firmware) Quickly to playback of last recordings.

playback of next recordings

(Based on firmware)Quickly to playback of next recordings.

1750Hz Signal

Fast Transmit 1750 pilot signal

Noise channel temporarily deleted

When scanning stops, press this key to temporarily delete the noise channel that is not needed temporarily. The channel will not be detected in the next scanning detection. When the walkie-talkie restarts scanning, the channel will be restored to the scanning list.

Time to broadcast

Press this button to broadcast the current time.

Flashlight

Press this key to turn on the flashlight, and press this key again to turn off the flashlight.

Individual Operation

Press this key to turn on and off Individual Operation

Note:

● The same button short press and long press can achieve different functions, specific by the dealer settings.

二．安全与概述 Security and overview

RF radiation information

This product is intended for professional applications that meet FCC RF radiation requirements. Users must be aware of the hazards of RF radiation and take appropriate measures to meet the requirements of RF radiation limit.

Common sense in RF radiation

RF refers to the electromagnetic frequency that can be radiated into space. It is a technology widely used in the fields of communication, medical treatment and food processing. It will produce some RF radiation during use.

Security in RF radiation

To ensure the physical and mental health of users, experts from science, engineering, medicine, health and industry, together with relevant organizations, have developed radio frequency radiation standards and guidelines, as shown below:

● United States Federal Communications Commission, Code of Federal Regulations; Vol 47, Part 2, Subsection J.

● American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 11992 and 11999.

● Standard issued by the International committee on non-ionizing radiation protection (ICNIRP) in 1998.

美国联邦通信委员会监管要求 Federal communications commission regulatory requirements

In accordance with the regulatory requirements of the federal communications commission, terminals must comply with the regulations of the federal communications commission on radio frequency radiation limits, or they cannot be sold in the United States market.The manufacturer is required to inform users of the matters needing attention by putting labels on the products, so as to improve users' awareness of radiation prevention.

射频辐射控制及操作说明 Control and operating instructions of RF radiation

OWNER’S MANUAL

用户手册 DMR Digital Radio

In order to maximize the performance of the product and to ensure compliance with the radiation limits in the relevant occupational or controlled environment of the above criteria, the sending time shall not exceed 50% of the rated factor and shall follow the instructions below:

· RF radiation is generated only during transmission (speech) rather than reception (listening) and standby.

· The distance between the terminal and the body during transmission should be at least 2.5 cm.

三．用前准备 Preparation before use

■充电 Charging

Be sure to ensure that the product is off when charging. Battery into the charger may be charging red flashing constantly flashing,

this is the battery power is too low, the charger to protect the battery pre-charge process, is a normal phenomenon, Generally continue for 30 seconds to turn the red light of the normal state of charge. Please use the charging seat specified by our company to charge the battery, the charging seat indicator shows the charging status.

1. Plug the power adapter into a power outlet;

2. Plug the other end of the power adapter into the socket on the back of the charging cradle;

3. Insert the battery or the battery-equipped product into the charging cradle correctly; the indicator light on the charging cradle shows the charging status. When the indicator light is red, it indicates the start of charging. When the indicator turns green, the charging is completed. The specific table below.

Indicator display

Current charge status

Red light

In charging

Green light

The charging is completed

Note:

● For best battery performance, charge for a minimum of 4 hours on first charge.

■电池信息 Battery information

⚫ The first use of the battery

Since the battery is not fully charged at the factory, please charge the new battery before use. Under normal circumstances, the battery when used for the first time, need to charge 4 hours, lithium-ion battery charging using slow charge or fast charge can be performed when charging. It is recommended that the new battery be operated as above for the first three uses. When you find the battery power is low, you need to charge the battery. ⚫ Suitable battery type

Please use the specified battery for charging; use of other batteries may cause explosion, resulting in human injury.

⚫ 电池的安全注意 Battery safety attention

1. Do not allow metal contacts (including coins, keys, jewelry, or other conductive metal) to be touched by the battery contacts or

pole pieces. Otherwise, the battery may short circuit, discharge, heat or leak, which may result in damage to the item or personal

injury. Therefore, be careful when handling any battery.

OWNER’S MANUAL

用户手册 DMR Digital Radio

2. Do not short-circuit the battery terminals or discard the battery in a fire. Do not disassemble the battery pack. When the battery is

discarded, please put into a dedicated battery recycling box. ⚫ Battery normal operation instructions

★Please charge the battery indoors, battery charging at room temperature best. ★Under normal circumstances, the charger indicator from red to green when the battery is fully charged, at this time the battery can be

removed. ★You can charge when Battery installed in the walkie-talkie, but when charging is best to turn off the walkie talkie, to ensure that the battery is fully charged. ★Please do not charge the battery when the battery power is not used up (after the battery is exhausted, the voice prompt alarm will be given), which will shorten the service life of the battery. ★Do not put a fully charged battery back on the charger to "power up" again, as this operation significantly reduces the cycle life of the battery.

●Extend battery life ★Battery performance will reduce below -20 ℃ temperature conditions. Prepare back-up batteries for use in colder weather. Please do not throw away cold batteries that cannot work. These batteries may be used at room temperature. ★Dusting the battery contacts may affect the battery life. Please wipe the contacts with a clean, dry cloth before inserting the batteries into the walkie-talkie. ⚫ Battery storage needs to know

1. Since the battery will have a self-discharge phenomenon, the battery when not in use for a long time, please fully charge the battery

and then stored to avoid over-discharge of its battery to damage the battery.

2. When the battery is in storage, remove the battery to recharge when stored about 6 months. To avoid over-discharge of electrolyte

affect battery capacity.

3. Pay attention to the temperature and humidity of the battery storage environment. Store the battery at room temperature in a cool,

dry place to minimize self-discharge of the battery.

■查看电池电量 Battery Voltage & Power Indication

If the dealer has set the 【battery power prompt】 shortcut key for the product, you can press the shortcut key to check the remaining battery power by voice prompt:

Voice Prompt

Battery Power

High Power

Battery power is sufficient, Battery Voltage ≥3.8V

Medium Power

Battery power is normal,Battery Voltage about 3.7V

Low Power

Battery power is low,Battery Voltage ≤3.6V,If the battery voltage is lower than

3.5v, transmission is prohibited, but reception is not affected. Please charge or replace the battery as soon as possible

■附件安装 Accessories installation

1．安装/卸下天线 Install / remove the antenna

OWNER’S MANUAL

用户手册 DMR Digital Radio

Turn off the radio and insert the antenna into the mounting hole and turn clockwise.

When removing the antenna, turn it counterclockwise to remove the antenna.

Do not shake the top of the antenna by hand, otherwise it will reduce the working performance and service life of the antenna.

2．安装/卸下电池 Install / remove the battery

⚫ Install the battery

Align the battery with the battery holder on the back of the walkie-talkie. Push the battery firmly into the walkie-talkie and slide the battery up until it locks into place.

⚫ Remove the battery

To remove the battery, turn off the transceiver. Slide the battery latch into the unlocked position and hold, and then slide the battery downward and out of the battery mount.

3．安装/卸下皮带夹 Install / remove the belt clip

⚫ Unscrew the two screws on the battery. Align the two screw holes in the belt clip with the screw holes in the top of the battery, and

then tighten the screws.

⚫ Loosen and remove the screw from the belt clip (it is recommended that you screw the screw to the battery for the next time you

are installing and using the belt clip).

4．安装外部耳机/麦克风（选配另购）Install external headphones / microphone (optional separately)

Open the headset cover, the headset plug into the headset hole will be ok. When you do not need to use the headset, unplug the

headset plug from the earphone jack and cover the earphone cap. When not using the universal interface, please cover the dust cover.

LED指示灯 LED Indicators

This product has LED indicators so you can easily grasp the current operating state.

Indicator status

Product status

Red on

Transmitting

Green on

Receiving

Green flash

Scanning

四、基本操作 Basic operation

开机与关机 Power on and off

To turn on the power, turn the [Power Switch / Volume Control] knob clockwise until you hear a "click" sound and a short beep sounds. To turn off the radio, turn the knob counterclockwise until you hear a click.

1.If the voice prompt is turned on,When power on or switching channels of voice prompt channel information.

2.If the voice prompt is turned off,There will be no voice prompt.

+ 14 hidden pages

PO FUNG ELECTRONIC DMV1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual